URBAN OUTFITTERS SILAS User manual

TOOLS REQUIRED BUT NOT INCUDED: N/A
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
2) Legs
(29.1x21.7x8.2") x2
or
(74x55x20.8 cm)
@
�
A) Bolt
(D 0.47/ 0.24x1. 18") x20
(D 12/ 6 x 30mm)
URBAN OUTFITTERS
3) Shelf
(40x12x1.5") x1
or
(101x30.5x3.8 cm)
@0
D) Allen Key
(D 0.16x2.32") x1
or
(D4x59mm)
SILAS DESK
Assembly Instructions
@
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x20
(D 12 x 6x2mm)
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 20
or
(D 16 x 6 x 2mm)
1) Table Top
(46x22x1.5") x1
or
(117x56x3.8 cm)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.@2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 2
117cm
56cm
75.8cm

URBAN OUTFITTERS
SILAS DESK
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.@2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 2
STEP 3
Repeat Step (1) to attach the additional leg (2). With help, flip over the desk to complete assembly.
3
1
2
STEP 1
Place the leg (2) into the table top (1) then insert bolt (A), split washer (B) and washer (C) as shown. Tighten with Allen
key (D). Place the shelf (3) into the leg (2) and insert bolt (A), split washer (B) and washer (C) as shown. Tighten with
Allen key (D).
D
ABC
D
ABC
D
BA
C
1
2
D
BA
C
A
B
C
D
D
A
C
B
2
2
3
1