URBAN OUTFITTERS INES Bed Headboard User manual

INES BED
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 2 2
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
A B C
Bedside 1X Headboard 1X Bedside 1X
D E FGH
X 1 Medium Bolt 1/4*50mm 8xSpring Washer 1/4" 8x Flat Washer 1/4*12 8x Half Moon Metal Block 8x
B

INES BED
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 2 2
STEP 1
Stand the Headboard (B) and align the Bedside (A) to the Headboard. Insert Half Moon Metal Block (H), Flat
Washer (G), Spring Washer (F) and Bolt (E). Tighten with supplied with supplied Hex Key (D). Repeat step to
attach the Bedside (C).
STEP 2
You may need to adjust the Levelers in the legs to accommodate for uneven flooring.
A
D
E
FG
B
H
STEP 1
C
D
E
F
G
H
STEP 2
STEP 3