URBAN OUTFITTERS EZRA User manual

EZRA DINING TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED:
N/A
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(A) Glass Table Top (B) Leg (C) Side Panel
x1 x4 x4

EZRA DINING TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 3
STEP 1
With help lay the Parts out onto a clean smooth surface such as carpet or cardboard. Unscrew the caps from Legs (B) by turning
them counter-clockwise. Save the Rubber Bumpers and Caps.
STEP 2
Align the Side Panels (C) to the Legs (B) and slide them into place as shown.

EZRA DINING TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 3
STEP 3
Locate the holes on the Glass Table Top (A) and carefully lay it down onto the partially assembled table base. Insert the rubber
bumpers and caps (parts saved from step 1) through the Glass Table Top (A) as shown and re-attach the caps by screwing them
clockwise onto the Legs (B). Once caps are secured, the assembly is complete.