URBAN OUTFITTERS CORA User manual

CORA MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of
2
TOOLS REQUIRED BUT NOT INCLUDED: Philips head screwdriver
Do not throw away packing materials and carton until after
assembly.Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
(A)
Mirror 1x
(B)
Screws 2x
M4x25mm
(C)
Anti-tip kit 1x
(D)
Nylon Straps 1x

CORA MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of
2
STEP 1
Locate where you want the mirror. Mark the location of the anchor points onto the wall. Contact your
local hardware store to purchase the correct anchors for your wall-type. Drill a hole at your mark and
insert your anchor. Align the anti-tip kit and screw it to the wall. Feed the nylon strap through the
anti-tip kit and through the ring on the mirror. Pull the nylon strap tight.