URBAN OUTFITTERS MABELLE 6 DRAWER CHEST User manual

TOOLSREQUIRED BUTNOTINCLUDED:
MANNER OR CORDLESS SCREWDRIVER
AssemblyInstructions
Do not throw awaypacking materials and carton untilafterassembly.
Assemble all partson a clean smooth surface
CAREINSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat orAirconditioning vents.
Adjust levelers so that the furniture sitsflat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden area.
You mayneed to re-tighten all boltsafterinitialuse.
PARTS INCLUDED
EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 1 of 7
HARWARDLIST
MABELLE6DRAWERCHEST
(A)Legs
Quantity: 4pcs (C)Handle Quantity: 6pcs
TIP KIT
(B)MiddleLegs
Quantity: 1pc
(2) Bracket
Quantity: 4pcs (3) Nylon strip M4 x 20mm
Quantity: 2pcs
(4) Screw
M4 x 20mm
Quantity: 4pcs
(5) Screw
M4 x 35mm
Quantity: 4pcs
(6) Wall blug
4x L40
Quantity: 4pcs
(1)Bolt
M4 x 25mm
Quantity: 12pcs

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 2 of 7
MABELLE6DRAWERCHEST
AssemblyInstructions
STEP 1. Pull the top drawers out and locate the Hardware inside.

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 3 of 7
MABELLE6DRAWERCHEST
AssemblyInstructions
STEP 2. With help lay the Dresser over and screw in the
feet clockwise as shown.
A
A
A
A
B

C
1
EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 4 of 7
MABELLE6DRAWER
CHEST
AssemblyInstructions
STEP 3.Align the Handles (C) as shown. Insert the
screws(1) from the back and tighten with screwdriver.

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 5 of 7
MABELLE6DRAWERCHEST
AssemblyInstructions
STEP 4. Align the anti tip brackets (2) to the top back of the
case. Insert Screws (4) and tighten completely. Do
not overtighten.
2
4

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 6 of 7
MABELLE6DRAWERCHEST
AssemblyInstructions
STEP 5.Contact your local hardware store to purchase the
correct anchors for your wall-type. Align the brackets to the
wall and make sure they line up with the brackets on the
back of the case from step 1. Screw the brackets to the wall
using the correct anchors. Slide the case to the wall.
Leaving a little bit of room between the case and the wall.
Feed the Nylon Strap through both brackets and pull tight.
2
3
Sideview
43
6
5
2
2

AssemblyInstructions
EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 7 of 7
FINISH
MABELLE6DRAWERCHEST