URBAN OUTFITTERS SILAS User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 3
SILAS CONSOLE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Phillips head screw driver, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors. Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Top Panel
(48 x 15 x 0.7") x 1
or
122 x 38 x 1.8 cm
2) Shelf
(48 x 15 x 0.7") x 1
or
122 x 38 x 1.8 cm
3) Bottom
(48 x 15 x 2.7") x 1
or
122 x 38 x 6.8 cm
4) Leg
(14 x 12 x 7") x 2
or
35.5 x 20.5 x 17 cm
5) Leg
(14 x 12 x 7") x 2
or
35.5 x 20.5 x 17 cm
A) Bolt
(D 0.47 / 0.24 x 1.18") x 12
or
(D 12 / 6 x 30 mm)
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x 12
or
(D 12 x 6 x 2 mm)
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 12
or
(D 16 x 6 x 2 mm)
D) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
E) Bolt
(D 0.47 / 0.24 x 0.59") x 12
or
(D 12 / 6 x 15 mm)
122cm
38cm
82cm
F)) L Shaped Met
(2.76 x 0.79 x 0.08") x 1
or
(70 x 20 x 2 mm)
G)
) Plastic Anch
(D 0.35 x 1.38") x 1
or
(D9 x 35 mm)
H)) Screw
(D 0.16 x 1.18") x 1
or
(D 4 x 30 mm)

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 3
ED
1
A
B
C
D
2
5
5
STEP 1
Assemble the top panel (1) to two legs (5) with bolt (E) and Allen key (D) as shown.
STEP 2
Attach the shelf (2) with bolts (A), flat washers (C), and spring washers (B) using Allen key (D) as shown.
STEP 3
Attach two legs (4) with bolt (E) and Allen key (D) as shown. Then attach the bottom (3) to two legs (4) with bolts
(A), flat washers (C), and spring washers (B) using Allen key (D) as shown. Place the L shaped metal bracket (F)
below the top shelf as shown and attach with bolts (A), flat washers (C), and spring washers (B) using Allen key (D)
With help, flip the console upright to finish assembly.
5
5
BA
C
D
3
4
4
2ED
F
D
CE
B
1
SILAS CONSOLE
Assembly Instructions

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 3
Wall
Wall
1
H
C
F
Wall Wall
G
STEP 5
Place the console on the wall in its desired location. Ensure the console is level and mark the location of the mounting hole
in the L shaped metal on the wall. Pre-drill hole for the plastic anchor (G) at the marked hole location using a drill and use a
hammer to tap it into the wall.
STEP 6
Place the console back over the plastic anchor (G) and insert screw (H) as shown. Tighten with a screwdriver to complete
the installation.
SILAS CONSOLE
Assembly Instructions