URBAN OUTFITTERS TULIP 65313884 User manual

Assembly Instructions
Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
TULIP SIDE TABLE
TOOLS REQUIRED BUT NOT INCLUDED: PHILLIPSHEAD SCREWDRIVER
(A) Screw M4 x 6mm
4x
PARTS INCLUDED
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits at on uneven oors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
(B) Screw M4 x 12mm
8x

Assembly Instructions
Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
TULIP SIDE TABLE
STEP 1. Align Panels (3) & (4) as shown. Slide them together.
STEP 2. Attach the Mounting Plate (2) with Screw (B). Tighten with screwdriver (not included) Lay the Top
Panel (1) over onto a clean smooth surface. Align assembled base as shown. Insert Screws (A).
Tighten with screwdriver (not included).
STEP 3. Attach the Base Plate (5) with Screw (B). Tighten with screwdriver (not included). Flip the table
upright.