URBAN OUTFITTERS RYAN User manual

RYAN ROLLING SIDE TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED: N/A
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
A) Metal Frame Leg
x4
E) Flat Washer
x4
B) Metal Sheet
x2
F) Open Wrench
x1
C) Bolt
[M6 x 10mm] x8
G) Hex Key
x1
D) Locking Casters
x4

RYAN ROLLING SIDE TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 2
STEP 1
Lay down all the parts on the clean carpet or cardboard for assembly. Align Metal Frame Leg (A) & metal sheet (B).
Insert screws (C) and partially tighten with hex key (G). Insert locking casters (D) into flat washer (E) as shown, and
screw castors into the Frame Leg (A) completely. Once all screws are inserted and partially tightened, tighten all
screws completely.