URBAN OUTFITTERS MEENA 69203289 User manual

MEENA COFFEE TABLE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
N/A
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface.
CARE INSTRUCTION:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning
vents. Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(A)TOP
x1
(C) ALLEN ROUND HEAD BOLT(SS)
[M6 x 30mm] x10
(D) WASHER (SS)
[20mm] x1
(B) LEG
x2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
�
(E) ALLEN KEY
[5mm] x1
Page 1 of 2

MEENA COFFEE TABLE
Assembly Instructions
FINAL
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
URBAN OUTFITTERS
\
J
Page 2 of 2
STEP 1
Lay the table top (A) on its back. Align the holes on legs (B) to the holes in the bottom of the table top (A).
Insert bolts (C) into washers (D) and into the table base. Tighten the bolts (C) with allen key (E).