urmet domus 1067 Series Owner's manual

DS1067-064C LBT20065
Mod.
1067
REMOTE CONTROLLABLE ALARM CONTROL PANELS
Ref. 1067/024
Ref. 1067/032A
Ref. 1067/052A
PROGRAMMING MANUAL

DS1067-064C 2LBT20065
TABLE OF CONTENTS
1CONTROL DEVICES ...........................................................................................................................................8
1.1 1067/022 keypad display .....................................................................................................................8
1.1.1 Function keys ...............................................................................................................................................8
1.1.2 LEDs and status icons..................................................................................................................................9
1.1.3 Zone indications ...........................................................................................................................................10
1.1.4 Area indications............................................................................................................................................11
1.2 1067/026 touchscreen keypad with proximity key reader....................................................................12
1.2.1 Function keys ...............................................................................................................................................13
1.2.2 Status icons..................................................................................................................................................13
1.2.3 Zone indications ...........................................................................................................................................14
1.2.4 Area indications............................................................................................................................................15
1.3 1067/334 – 1067/335 electronic key readers ......................................................................................16
1.4 1067/434 – 1067/435 proximity key reader .........................................................................................17
1.5 1058/035 remote control......................................................................................................................18
2SYSTEM ACCESS ...............................................................................................................................................19
2.1 System access codes ..........................................................................................................................19
2.1.1 Default access codes ...................................................................................................................................20
2.1.2 Code change................................................................................................................................................21
2.1.3 How to reset an access code .......................................................................................................................21
2.1.4 How to enable the hold-up function..............................................................................................................22
2.1.5 Entering an invalid code or using an invalid key...........................................................................................22
3MENU ...................................................................................................................................................................23
3.1 How to access menus..........................................................................................................................23
3.2 How to navigate the menus .................................................................................................................23
3.3 Free access menu ...............................................................................................................................24
3.4 Main Menu ...........................................................................................................................................25
4SYSTEM COMMISSIONING................................................................................................................................26
4.1 Conventions used in programming procedures...................................................................................26
4.2 How to enter alphanumeric characters ................................................................................................27
4.3 Vocal name ..........................................................................................................................................27
4.4 How to enable the Installer ..................................................................................................................28
4.5 How to enable the Technical Manager code .......................................................................................28
4.6 How to select the language .................................................................................................................29
4.7 LCD Info...............................................................................................................................................30
4.8 How to set date and time .....................................................................................................................31
4.9 Zones programming.............................................................................................................................32
4.10 Areas programming .............................................................................................................................34
4.11 Wired input programming.....................................................................................................................35
4.11.1 Wired input encoding....................................................................................................................................35
4.11.2 Input types....................................................................................................................................................35
4.11.3 Wired input customisation ............................................................................................................................36
4.11.4 Isolable.........................................................................................................................................................38
4.11.5 Ancillary functions (Gong, Courtesy Light, Door Opener, Absence of Move) ............................................... 38
4.11.6 Burglar input attributes (Release Type, AND / OR zones) ...........................................................................38
4.11.7 AND inputs ...................................................................................................................................................38
4.11.8 Programming procedure...............................................................................................................................38
4.12 Wired input programming.....................................................................................................................41
4.12.1 Output encoding...........................................................................................................................................41
4.12.2 Output types.................................................................................................................................................41
4.12.3 Output assignment .......................................................................................................................................41
4.12.4 Output customisations..................................................................................................................................41
4.12.5 Programming procedure...............................................................................................................................44
4.13 Keypad programming...........................................................................................................................46
4.13.1 Functions to be configured ...........................................................................................................................46
4.13.2 Emergency indication ...................................................................................................................................46

DS1067-064C 3LBT20065
4.13.3 Programming procedure...............................................................................................................................46
4.14 Reader programming ...........................................................................................................................48
4.14.1 LED management ........................................................................................................................................48
4.14.2 Programming procedure...............................................................................................................................48
4.15 Keys .....................................................................................................................................................49
4.15.1 Key acquisition .............................................................................................................................................49
4.15.2 Delete Key....................................................................................................................................................50
4.15.3 Key configuration .........................................................................................................................................50
4.16 Wireless input programming ................................................................................................................51
4.16.1 Wireless input encoding ...............................................................................................................................51
4.16.2 Wireless input types .....................................................................................................................................52
4.16.3 Wireless input customisation........................................................................................................................52
4.16.4 Isolable.........................................................................................................................................................52
4.16.5 Ancillary functions (Gong, Courtesy Light, Door Opener, Absence of Move) ............................................... 52
4.16.6 Input attributes (Release Type, AND / OR zones)........................................................................................52
4.16.7 AND inputs ...................................................................................................................................................52
4.16.8 Programming procedure...............................................................................................................................52
4.17 Wireless output programming..............................................................................................................55
4.17.1 Wireless output encoding .............................................................................................................................55
4.17.2 Wireless output customisation......................................................................................................................55
4.17.3 Status report.................................................................................................................................................55
4.17.4 Programming procedure...............................................................................................................................56
4.18 1058/035 remote control programming................................................................................................57
4.19 Advanced programming.......................................................................................................................59
4.19.1 Remote control system code........................................................................................................................59
4.19.2 Programming procedure...............................................................................................................................59
4.20 General system parameters (timings)..................................................................................................60
4.20.1 Programming procedure...............................................................................................................................60
4.21 Telephone dialer ..................................................................................................................................61
4.21.1 Telephone numbers .....................................................................................................................................61
4.21.2 Vocal messages...........................................................................................................................................62
4.21.3 SMS text messages .....................................................................................................................................64
4.21.4 Alarm sending types.....................................................................................................................................64
4.21.5 Alarm message and call block sending mode ..............................................................................................65
4.21.6 PSTN parameters.........................................................................................................................................69
4.21.7 GSM parameters..........................................................................................................................................70
4.21.8 GPRS parameters ........................................................................................................................................71
4.21.9 IDP/IP parameters........................................................................................................................................72
4.21.10 PSTN Line Test............................................................................................................................................73
4.21.11 Period Comm Test .......................................................................................................................................73
4.21.12 Rem Ctrl Backup ..........................................................................................................................................74
4.21.13 Answer Machine...........................................................................................................................................75
4.21.14 Rem.Ctrl Code .............................................................................................................................................76
4.21.15 Return Call ...................................................................................................................................................76
4.21.16 Telephone line enabling ...............................................................................................................................77
4.22 Timed programmer ..............................................................................................................................78
4.22.1 Operating principles .....................................................................................................................................78
4.22.2 Programming................................................................................................................................................79
4.22.3 Deleting a command ....................................................................................................................................80
4.23 System Test .........................................................................................................................................80
4.23.1 Input test ......................................................................................................................................................81
4.23.2 Output test....................................................................................................................................................81
4.23.3 Battery test ...................................................................................................................................................82
4.23.4 Vocal call test ...............................................................................................................................................82
4.23.5 Alarm receiving centre call test ....................................................................................................................83
4.23.6 GSM Field Test ............................................................................................................................................83
4.23.7 Environmental listening test .........................................................................................................................83
4.23.8 Radio device test..........................................................................................................................................84
4.23.9 Final tests.....................................................................................................................................................84
4.24 User training.........................................................................................................................................84
5SYSTEM COMMISSIONING................................................................................................................................85
5.1 Arming procedure ................................................................................................................................85

DS1067-064C 4LBT20065
5.2 Arming from 1067/022 keypad.............................................................................................................85
5.2.1 Total arming (system with zones only) .........................................................................................................85
5.2.2 Total arming (system with areas and zones)................................................................................................85
5.2.3 Partial arming (system with zones only).......................................................................................................86
5.2.4 Partial arming (system with areas and zones)..............................................................................................86
5.3 Arming from 1067/026 keypad.............................................................................................................87
5.3.1 Total arming (system with zones only) .........................................................................................................87
5.3.2 Total arming (system with areas and zones)................................................................................................87
5.3.3 Partial arming (system with zones only).......................................................................................................88
5.3.4 Partial arming (system with areas and zones)..............................................................................................88
Proceed as follows to arm the entire alarm system partially if areas are defined: .....................................................88
5.4 Arming with electronic or proximity key ...............................................................................................89
5.4.1 Total arming from electronic key reader .......................................................................................................89
5.4.2 Total arming from proximity key reader ........................................................................................................90
5.4.3 Total arming from 1067/026 keypad.............................................................................................................90
5.4.4 Partial arming from electronic key reader.....................................................................................................91
5.4.5 Partial arming from proximity key reader......................................................................................................91
5.4.6 Partial arming from 1067/026 keypad...........................................................................................................92
5.5 Arming using 1058/035 remote control................................................................................................92
5.5.1 Total arming .................................................................................................................................................92
5.5.2 Partial arming ...............................................................................................................................................93
5.6 Disarming procedure............................................................................................................................93
5.7 Disarming from 1067/022 keypad........................................................................................................93
5.7.1 Total disarming (system with zones only).....................................................................................................93
5.7.2 Total disarming (system with areas and zones) ...........................................................................................93
5.7.3 Partial disarming (system with zones only) ..................................................................................................94
5.7.4 Partial disarming (system with areas and zones) .........................................................................................94
5.7.5 Disarming from keypad under hol-up ...........................................................................................................94
5.8 Disarming from 1067/026 keypad........................................................................................................95
5.8.1 Total disarming (system with zones only).....................................................................................................95
5.8.2 Total disarming (system with areas and zones) ...........................................................................................95
5.8.3 Partial disarming (system with zones only) ..................................................................................................96
5.8.4 Partial disarming (system with areas and zones) .........................................................................................96
5.8.5 Disarming from keypad under hold-up .........................................................................................................97
5.9 Disarming with electronic or proximity key...........................................................................................97
5.9.1 Total disarming from electronic key reader .................................................................................................. 97
5.9.2 Total disarming from proximity key reader ................................................................................................... 98
5.9.3 Total disarming from 1067/026 keypad ........................................................................................................98
5.9.4 Partial disarming from electronic key reader ................................................................................................98
5.9.5 Partial disarming from proximity key reader .................................................................................................98
5.9.6 Partial disarming from 1067/026 keypad ......................................................................................................99
5.10 Disarming using 1058/035 remote control...........................................................................................99
5.10.1 Total system disarming ................................................................................................................................99
5.10.2 Partial disarming with remote control ...........................................................................................................99
5.11 Splitting ................................................................................................................................................100
5.12 Direct access function keys .................................................................................................................100
5.12.1 1067/022 keypad..........................................................................................................................................100
5.12.2 1067/026 keypad..........................................................................................................................................100
5.12.3 1058/035 remote control programming key..................................................................................................100
5.13 How to stop alarms in progress ...........................................................................................................101
5.14 System status information....................................................................................................................101
5.14.1 How to view system status ...........................................................................................................................101
5.14.2 How to view open inputs ..............................................................................................................................102
5.14.3 How to view isolated or inhibited inputs........................................................................................................102
5.14.4 How to examine the Alarms Memory............................................................................................................102
5.14.5 How to delete the Alarms Memory ...............................................................................................................103
5.14.6 How to examine the Tampers Memory.........................................................................................................103
5.14.7 How to delete the Tampers Memory ............................................................................................................103
5.14.8 How to examine the fault and anomaly memory ..........................................................................................104
5.14.9 How to delete the fault memory....................................................................................................................104
6USER REMOTE CONTROL.................................................................................................................................105

DS1067-064C 5LBT20065
6.1 How to skip a telephone answering machine ......................................................................................105
6.2 Remote control with text messages.....................................................................................................105
6.3 How to activate commandable outputs at no cost ...............................................................................106
6.4 Remote control with guided voice menu..............................................................................................106
6.5 List of vocal answer machine DTMF controls ......................................................................................107
6.6 Environmental listening........................................................................................................................107
7ALARMS, EVENTS AND INDICATIONS .............................................................................................................108
7.1 Alarm and event indications.................................................................................................................108
7.1.1 How to use the table.....................................................................................................................................108
7.2 Description of alarms and indications ..................................................................................................111
7.2.1 Burglar alarm................................................................................................................................................111
7.2.2 Burglar pre-alarm .........................................................................................................................................111
7.2.3 Tamper alarm...............................................................................................................................................112
7.2.4 Wrong code alarm........................................................................................................................................112
7.2.5 Panic indication ............................................................................................................................................113
7.2.6 Silent panic indication...................................................................................................................................113
7.2.7 Hold-up indication ........................................................................................................................................113
7.2.8 Emergency indication ...................................................................................................................................114
7.2.9 Fire indication...............................................................................................................................................114
7.2.10 Detector jamming alarm ...............................................................................................................................115
7.2.11 Detector fault alarm ......................................................................................................................................115
7.2.12 Faulty siren alarm.........................................................................................................................................115
7.2.13 Failure alarm from failure input.....................................................................................................................116
7.2.14 System failure alarm.....................................................................................................................................116
7.2.15 External communicator failure alarm ............................................................................................................116
7.2.16 No Bus communication alarm ......................................................................................................................117
7.2.17 Protracted no mains power alarm ................................................................................................................117
7.2.18 Control panel and other device low battery alarm ........................................................................................117
7.3 Description of events ...........................................................................................................................118
7.3.1 Reset fire alarm event ..................................................................................................................................118
7.3.2 Technological type 1 event...........................................................................................................................118
7.3.3 Technological type 2 event...........................................................................................................................118
7.3.4 Technological type 3 event...........................................................................................................................118
7.3.5 Door opener event .......................................................................................................................................119
7.3.6 Courtesy light event......................................................................................................................................119
7.3.7 Instantaneous no mains power event...........................................................................................................119
7.3.8 Maintenance event .......................................................................................................................................119
7.3.9 Inhibit inputs event .......................................................................................................................................119
7.3.10 Isolated input event ......................................................................................................................................120
7.3.11 Arm/disarm zones event...............................................................................................................................120
7.3.12 Arm/disarm zones override event.................................................................................................................120
7.3.13 Open input event..........................................................................................................................................120
7.3.14 Open input test event ...................................................................................................................................120
7.3.15 Arrest system event......................................................................................................................................121
7.3.16 Valid code entered by user on keypad event ...............................................................................................121
7.3.17 Edit date-time on keypad event....................................................................................................................121
7.3.18 User code enable/disable event ...................................................................................................................121
7.3.19 Key enable/disable event .............................................................................................................................121
7.3.20 Key acquisition/deletion event......................................................................................................................121
7.3.21 Timed programmer warning event ...............................................................................................................121
7.3.22 Arming block event.......................................................................................................................................121
7.3.23 Arming not executed event...........................................................................................................................121
7.4 Description of acoustic indications.......................................................................................................122
7.4.1 Entry/exit time indication ..............................................................................................................................122
7.4.2 Arming warning ............................................................................................................................................122
7.4.3 Gong ............................................................................................................................................................122
7.4.4 System status by means of wireless sirens..................................................................................................122
8PROGRAMMING VIA COMPUTER .....................................................................................................................123
8.1 Programming methods.........................................................................................................................123
8.2 Prerequisites ........................................................................................................................................123
8.2.1 Hardware prerequisites for data transfer ......................................................................................................123
8.2.2 Personal computer requirements .................................................................................................................123
8.2.3 Software requirements .................................................................................................................................123

DS1067-064C 6LBT20065
8.2.4 Enabling requirements .................................................................................................................................123
8.3 How to save and restore data on USB flash drive...............................................................................124
8.3.1 Files..............................................................................................................................................................124
8.3.2 File types......................................................................................................................................................124
8.3.3 How to save data on USB flash drive ...........................................................................................................125
8.3.4 How to restore data on the control panel...................................................................................................... 126
9MAINTENANCE ...................................................................................................................................................127
9.1 Input isolation and end of isolation ......................................................................................................127
9.1.1 How to isolate an input .................................................................................................................................127
9.1.2 How to end isolate an input ..........................................................................................................................127
9.2 How to view device addresses ............................................................................................................128
9.3 How to view the firmware release of devices.......................................................................................128
9.4 How to upgrade bus device firmware from menu ................................................................................129
9.4.1 Necessary conditions ...................................................................................................................................129
9.4.2 Upgrade file..................................................................................................................................................129
9.4.3 Preliminary operations..................................................................................................................................130
9.4.4 How to upgrade bus devices ........................................................................................................................130
9.5 Firmware upgrade at power on............................................................................................................131
9.5.1 Procedura di aggiornamento FW dispositivo power on ................................................................................131
9.5.2 Control panel upgrade procedure at power on .............................................................................................132
9.6 Partial reset..........................................................................................................................................133
9.7 Global reset..........................................................................................................................................133
9.8 Event Log.............................................................................................................................................133
9.8.1 How to interpret viewed data........................................................................................................................134
9.8.2 How to browse the Event Log ......................................................................................................................134
9.9 Diagnose Log.......................................................................................................................................134
9.9.1 How to interpret viewed data........................................................................................................................135
9.9.2 How to browse the Diagnose Log ................................................................................................................135
9.9.3 How to delete the Diagnose Log ..................................................................................................................135
9.10 EN50131 degree compliance ..............................................................................................................136
9.11 How to acquire BUS devices ...............................................................................................................136
9.12 How to delete BUS devices .................................................................................................................136
10 TABLES................................................................................................................................................................137
10.1 How to acquire BUS devices ...............................................................................................................137
10.2 Alarm sending types ............................................................................................................................138
10.3 IDP message structure ........................................................................................................................139
10.4 Detail of events and management .......................................................................................................141
10.5 Factory settings....................................................................................................................................142
10.5.1 System code ................................................................................................................................................142
10.5.2 Zones ...........................................................................................................................................................142
10.5.3 Users............................................................................................................................................................142
10.5.4 Keys .............................................................................................................................................................143
10.5.5 General parameters .....................................................................................................................................143
10.5.6 Areas............................................................................................................................................................143
10.5.7 Control panel inputs .....................................................................................................................................144
10.5.8 Control panel outputs ...................................................................................................................................145
10.5.9 Expansion module inputs .............................................................................................................................146
10.5.10 Expansion outputs........................................................................................................................................146
10.5.11 Keypad inputs ..............................................................................................................................................147
10.5.12 Radio expansion module inputs ...................................................................................................................148
10.5.13 Radio expansion module outputs (sirens) ....................................................................................................149
10.5.14 Reader inputs...............................................................................................................................................149
10.5.15 Keypad parameters......................................................................................................................................149
10.5.16 Reader- zones assignment ..........................................................................................................................149
10.5.17 Remote control key- zones assignment .......................................................................................................149
10.5.18 1067/002A PSTN Communicator .................................................................................................................150
10.5.19 Timed programmer.......................................................................................................................................150
10.6 Timed programmer configuration.........................................................................................................151

DS1067-064C 7LBT20065
INTRODUCTION
ORGANISATION OF THE MANUAL
The manual is divided into chapters and the various topics are arranged in sequence to provide step-by-step instructions
for programming and configuring the system.
Information for system design, installation and maintenance are contained in the Installation Manual.
The Installation Manual also contains the device acquisition procedure.
Instructions for system use by the end user are contained in the User Manual.
CONVENTIONS USED
The following conventions are used in the manual for the sake of simplicity:
This is the LCD with the displayed message.
Unless otherwise specified, the same message is shown on the touchscreen
keypad.
, , , , …
This is the equivalent key to be pressed on the keypad.
<Master code>
<User code>
<Installer code>
<Technical Manager code>
This indicates the code to be entered using the keypad.
<Master / User code> This means that either code may be entered on the keypad indifferently.
H24 This means that the described function or service is always active.
Pay attention to the following symbols:
This symbol indicates an important warning.
This symbol indicates advice.
This symbol indicates EN50131 grade 3 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and
of the enabled functions.
This symbol indicates EN50131 grade 2 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and
of the enabled functions.
This symbol indicates that EN50131 compliance may depend on other functions enabled in the system.
The symbol means that the function or device is not EN50131 certified.
This symbol means that the function or device will cancel EN50131 certification.

DS1067-064C 8LBT20065
1 CONTROL DEVICES
This chapter contains a description of the devices which allow to access the alarm system locally, to arm or disarm the
system, to program and to interact with it.
The function of the various keys and the information supplied by the LEDs and on the display are explained for keypads.
The information supplied by the LEDs is provided for readers.
1.1 1067/022 KEYPAD DISPLAY
Figure 1 – 1067/022 keypad
Ref. Description Use or indications provided
A Alphanumeric keys For entering the access code, arming or disarming the system, programming the system.
B Function keys For activating fire, emergency and silent panic indications.
C LCD 2 x 16
characters
Date and time or detailed information on system status is shown in stand-by mode*.
Menus and system parameters and information are shown during system programming
or querying.
D Navigation keys These are used to go from one menu item to another. They change the value of some
parameters.
E MENU key To access the menu.
F ESC key To go back to the upper menu level.
G OK key To confirm the access code and other entered data.
To confirm the chosen menu and go to the submenu.
H Lid To protect the alphanumeric keys.
*Displaying information other than date and time in stand-by mode declasses EN50131 certification from grade 3 to
grade 2.
Table 1 - 1067/022 keypad elements
1.1.1 Function keys
Symbol Key Associated function
1 Fire indication
4 Emergency indication
7 Silent panic indication
Table 2 - 1067/022 keypad function keys
H
A
B
C
G
F
E
D

DS1067-064C 9LBT20065
1.1.2 LEDs and status icons
Figure 2 – Display and status LEDs on 1067/022 keypad
The LEDs on the keypads indicate system status and alarms. Available information is shown in Table 3 - LEDs indication
and icons of 1067/022 keypad.
The amount of displayed information depends on the system status level (armed or disarmed), the EN50131 grade set
during programming and the access level (see paragraph 2.1 System access codes). Paragraph 1.1.2.1 Use of LEDs
with EN50131 grade 3 lists the information available in the various cases.
Symbol Description Indicator Supplied indications
Power Green LED
On = mains power present
Blinking = no mains power, battery power present
Failure or notice 1Yellow LED
Off = normal operation
On = failure or notice present
Blinking = see details of current failures
Maintenance Yellow LED
Off = normal operation
On = system maintenance in progress
Timed
programmer Green LED
Off = no command
On = commands present for the current day
Blinking = control activation warning
Open inputs Yellow LED
Off = no open input
On = open input
Blinking = see details of current open inputs
Inhibited or
isolated inputs Yellow LED
Off = no inhibited or isolated input
On = inhibited or isolated input
Blinking = see details of current inhibited or isolated inputs
Alarm 2Red LED
Off = no alarm condition present
On = at least one alarm condition present
Blinking = see details of current alarms
Tamper 3Red LED
Off = no tamper condition present
On = at least one tamper condition present
Blinking = see details of current tampering
System status 4Green LED
Off = all zones associated to the keypad are disarmed
On = all zones associated to the keypad are armed
Blinking = some zones associated to the keypad are armed
1) The indicated failures and warnings are: PSTN line, power overvoltage, power low voltage, battery (inefficient or low
battery), system bus communication (devices not interfacing with control panel), control panel input and expansion
+V voltage, control panel condition (burglar, input inhibition or isolation, tampering).
2) The indicated alarm conditions are burglar and warning. Technological indications are also provided (emergency,
fire, technological 1, technological 2, technological 3).
3) The indicated tampering conditions are: control panel tamper, control panel SAB input, expansion SAB input, tamper
input, imbalance of one of the inputs specialised as balanced or double balance, attempt to use a wrong access
code or key (repeated 21 times).
4) Information is limited to the zones associated to the keypad only. The status of any configured zones which are not
associated to the keypad cannot be determined.
Table 3 - LEDs indication and icons of 1067/022 keypad

DS1067-064C 10 LBT20065
1.1.2.1 Use of LEDs with EN50131 grade 3
The keypad LED indications which are visible without needing to enter a valid code depend on the EN50131 grade
(Mode 3, Mode 2 or Mode 0) set during programming.
IMPORTANT! By setting Mode 0 the system will lose EN50131 compliance it potentially had before.
Behaviour in Mode 2 is two-fold: all LED indications are visible when the alarm system is disarmed, while only the power,
timed programmer and system status indications appear when the system is armed (the other LED indications may be
viewed by entering a valid code). This use mode is EN50131 grade 2 compliant.
The alarm system is EN50131 grade 3 compliant in Mode 3. LED indications are not always visible and depend on
system status (armed or disarmed) and whether a valid access code is entered. The indications shown refer to the zones
associated to the keypad only.
IMPORTANT ! Mode 3 is not available for the 1067/024 control panel because this device is EN50131 grade 2,
and not grade 3, compliant.
Table 4 – LED indication visibility of 1067/022 keypad complying with EN50131 grade 3 shows how the LEDs behave on
the keypad in Mode 3.
Enter a valid code to see details on the indications.
All indications can be deleted using the Installer or Technical Manager codes. Only burglar, power failure and
communication failure indications can be deleted with the Master or User codes.
Alarm system status Armed Disarmed
Access code used No code Master /
User
Installer /
Technical
Manager No code Master /
User
Installer /
Technical
Manager
Power LED ■■■■■■
Failure or warning LED □□■■■
Maintenance LED □□■■■
Timed programmer LED ■■■■■■
Open inputs LED □□■■■
Inhibited or isolated input LED □□□□
Alarm LED □□□□
Tamper LED □□□□
System status LED □□□□
■= The LED indication is always visible even without entering an access code.
□= The LED indication is only visible after having entered a valid access code.
Table 4 – LED indication visibility of 1067/022 keypad complying with EN50131 grade 3
1.1.3 Zone indications
The zones status is shown on the display in graphic mode.
The graphic symbols corresponding to digits 1 to 16 appear on the second line of the
screen.
The meanings are:
Symbol During normal use During programming
□Zone disarmed Zone not associated to the function
■Zone armed Zone associated to the function
0 Zone disarmed with one or more open inputs -
. Zone does not exist Zone does not exist
Example for 1067/052A
Zone 4 is armed, Zones 1, 2, 5 and 6 are disarmed, Zone 3 is disarmed with one or
more open inputs, Zones from 7 to 16 do not exist.
SYSTEM STATUS
□□□□□□..........
SYSTEM STATUS
□□0■□□..........
1 2 34 5 6 7 8 9 10111213141516
1 2 34 5 6 7 8 9 10111213141516

DS1067-064C 11 LBT20065
1.1.4 Area indications
The area status is shown on the display in graphic mode.
The graphic symbols corresponding to letters A, B, C, D appear on the second line of
the screen.
IMPORTANT! The 1067/024, control panel has only two areas and graphic symbols appear next to the letters A,
B only.
The meanings are:
Symbol During normal use During programming
□area disarmed area not associated to the function
■area armed area associated to the function
area partially armed
. area does not exist area does not exist
Example
Area A is armed, area B is disarmed, area C is partially active, area D does not exist.
AREAS STATUS
□□□□
AREAS STATUS
■□ .
1 2 34 5 6 7 8 9 10111213141516
A B C D
1 2 34 5 6 7 8 9 10111213141516
A B C D

DS1067-064C 12 LBT20065
1.2 1067/026 TOUCHSCREEN KEYPAD WITH PROXIMITY KEY READER
Figure 3 – 1067/026 keypad
Ref. Description Use or indications provided
A Alphanumeric keys Used to enter the access code, select some functions and program the
control panel
B Function keys Used to activate the additional system functions
C Graphic OLED display In stand-by, shows date and time, detailed system status information, event
log and programming menus
D Yellow LED
Notices
Off = normal operation
On= failure, fault, alarm or tampering
E Green LED
System status
Off = system disarmed
On= system all armed
Blinking = system partially armed
F Green LED
Mains voltage
On = mains power present
Blinking = no mains power, battery power present
See Installation Manual.
G Yellow LED
Maintenance
Off = normal operation
On= system maintenance in progress
H Proximity key reader Proximity key sensor
I OK key Confirm access code and other entered data; confirm chosen menu item
and go to the submenu
L Arrow keys To scroll menu items and edit the value of some parameters
M MENU key To access the menu
N ESC key To go back to the upper menu level
P Approach sensor Approach the hand to activate the keypad
Q Microphone Environmental listening microphone
*Displaying information other than date and time in stand-by mode declasses EN50131 certification from grade 3 to
grade 2.
Table 5 - 1067/026 keypad elements
A
B
C
G
D
E
M
L
I
F
H
P
Q
N

DS1067-064C 13 LBT20065
1.2.1 Function keys
Symbol 1067/026 key Associated function
T1 Silent panic indication
T2 Emergency indication
T3 Fire indication
T4 Clean glass
Table 6 - 1067/026 keypad function keys
1.2.2 Status icons
Figure 4 – 1067/026 keypad display and status icons
The LEDs and icons on the keypads indicate system status and alarms. Available information is shown in the table
below.
The amount of displayed information depends on the system status level (armed or disarmed), the EN50131 grade set
during programming and the access level (see paragraph 2.1 System access codes). Paragraph 1.2.2.1 Use of LEDs
and icons with EN50131 grade 3 lists the information available in the various cases.
Symbol Description Supplied indications
Power Present = no mains power
Highlighted = see electric mains failures details
Failure Present = failures present
Highlighted = see details of current failures
Timed
programmer
Present = commands present for the current day
Highlighted = control activation warning
Open inputs Present = open input
Highlighted = see details of current open inputs
Inhibited or
isolated inputs
Present = inhibited or isolated input
Highlighted = see details of current inhibited or isolated inputs
Alarm Present = at least one alarm condition present
Highlighted = see details of current alarms
Power Present = at least one tamper condition present
Highlighted = see details of current tampering
Table 7 - LED and icon indications of 1067/026 keypad

DS1067-064C 14 LBT20065
1.2.2.1 Use of LEDs and icons with EN50131 grade 3
The visibility of the keypad LED and icon indications without needing to enter a valid code depends on the EN50131
grade (Mode 3, Mode 2) set during programming.
IMPORTANT! By setting Mode 0 the system will lose EN50131 compliance it potentially had before.
Behaviour in Mode 2 is two-fold: all LED and icon indications are visible when the alarm system is disarmed, while only
the power, timed programmer and system status indications appear when the system is armed (the other LED and icon
indications may be viewed by entering a valid code). This use mode is EN50131 grade 2 compliant.
The alarm system is EN50131 grade 3 compliant in Mode 3. LED and icon indications are not always visible and depend
on system status (armed or disarmed) and whether a valid access code is entered. The indications shown refer to the
zones associated to the keypad only.
IMPORTANT! Mode 3 is not available for the 1067/024 control panel because this device is EN50131 grade 2,
and not grade 3, compliant.
The Table 8 below, shows how the LEDs behave on the keypad in Mode 3.
Enter a valid code to see details on the indications.
All indications can be deleted using the Installer or Technical Manager codes. Only burglar, power failure and
communication failure indications can be deleted with the Master or User codes.
Alarm system status Armed Disarmed
Access code used No code Master /
User
Installer /
Technical
Manager No code Master /
User
Installer /
Technical
Manager
Power LED / icon ■■■■■■
Failure or warning LED / icon □□■■■
Maintenance LED □□■■■
Timed programmer icon ■■■■■■
Open inputs icon □□□□
Inhibited or isolated inputs icon □□□□
Alarm icon □□□□
Tamper icon □□□□
System status LED □□□□
■= The LED / icon indication is always visible even without entering an access code.
□= The LED / icon indication is only visible after having entered a valid access code.
Table 8 – LED indication visibility of EN50131 grade 3 compliant 1067/026 keypad 3
1.2.3 Zone indications
The zone status is shown on the displays in graphic mode. The zones appear on two lines.
The meanings are:
Symbol During normal use During programming
Zone disarmed Zone not associated to the function
Zone armed Zone associated to the function
Zone disarmed with one or more open inputs -
Zone does not exist Zone does not exist
In the example above, zones 1 and 5 are armed, zone 12 has one or more open inputs and zone 16 does not exist. The
remaining zones are disarmed.

DS1067-064C 15 LBT20065
1.2.4 Area indications
The areas status is shown on the displays in graphic mode. The areas status is shown on the last line.
The meanings are:
Symbol During normal use During programming
area disarmed area not associated to the function
area armed area associated to the function
area partially armed
area does not exist area does not exist
In the example above, area A is armed, area B is partially armed, area C is disarmed and area D does not exist.
AREAS STATUS

DS1067-064C 16 LBT20065
1.3 1067/334 – 1067/335 ELECTRONIC KEY READERS
Figure 5 – 1067/334 – 1067/335 electronic key readers
Ref. Description Use or indications provided
Operating mode = Mode 3 Operating mode = Mode 2
1...
2 3
LED (green)
associated
zone status
•Off *= all zones associated to the LED
are disarmed
•On *= all zones associated to the LED
are armed
•Blinking * = at least one zone associated
to the LED is armed
•Off = all zones associated to the LED
are disarmed
•On = all zones associated to the LED
are armed
•Blinking = at least one zone associated
to the LED is armed
A LED (yellow)
alarms and
indications
•Off = no indications for the zones
associated to the reader
•On = alarm indication stored for the
zones associated to the reader or tamper
or system failure (the indication only
appears when the system is disarmed)
•Blinking = presence of at least one
open input in the zones associated to the
reader.
The indication only appears when the system
is disarmed.
The LED will light up fixed if there are alarms,
or failures and open inputs at the same time.
This LED lights up to indicate the need to
check indication details on the keypad.
•Off = no indications for the zones
associated to the reader
•On = alarm indication stored for the
zones associated to the reader or tamper
or system failure (the indication only
appears when the system is disarmed)
•Blinking = presence of at least one
open input in the zones associated to the
reader.
The LED will light up fixed if there are alarms,
or failures and open inputs at the same time.
This LED lights up to indicate the need to
check indication details on the keypad.
B Electronic keyhole 1067/334 – 1067/335 Shaped hole for inserting the electronic key.
Mode 3 is EN50131 grade 3 compliant.
IMPORTANT! Mode 3 is not available for the 1067/024 control panel because this device is EN50131 grade 2,
and not grade 3, compliant.
Mode 2 is EN50131 grade 2 compliant.
*) The LED will remain off in a EN50131 grade 3 compliant system even if an indication is present. Insert the key and
remove it to check system status: the LEDs associated to active zones will light up for a few seconds (fixed or blinking).

DS1067-064C 17 LBT20065
1.4 1067/434 – 1067/435 PROXIMITY KEY READER
Figure 6 – 1067/434 -1067/435 proximity key reader
Ref. Description Use or indications provided
Operating mode = Mode 3 Operating mode = Mode 2
1...
2 3
LED (green)
associated
zones status
•Off *= all zones associated to the LED
are disarmed
•On *= all zones associated to the LED
are armed
•Blinking * = at least one zone associated
to the LED is armed
•Off = all zones associated to the LED
are disarmed
•On = all zones associated to the LED
are armed
•Blinking = at least one zone associated
to the LED is armed
A LED (yellow)
alarms and
indications
•Off = no indications for the zones
associated to the reader
•On = alarm indication stored for the
zones associated to the reader or tamper
or system failure (the indication only
appears when the system is disarmed)
•Blinking = presence of at least one
open input in the zones associated to the
reader.
The indication only appears when the system
is disarmed.
The LED will light up fixed if there are alarms,
or failures and open inputs at the same time.
This LED lights up to indicate the need to
check indication details on the keypad.
•Off = no indications for the zones
associated to the reader
•On = alarm indication stored for the
zones associated to the reader or tamper
or system failure (the indication only
appears when the system is disarmed)
•Blinking = presence of at least one
open input in the zones associated to the
reader.
The LED will light up fixed if there are alarms,
or failures and open inputs at the same time.
This LED lights up to indicate the need to
check indication details on the keypad.
B Transponder 1067/434 – 1067/435 proximity key sensor.
Mode 3 is EN50131 grade 3 compliant.
IMPORTANT! Mode 3 is not available for the 1067/024 control panel because this device is EN50131 grade 2,
and not grade 3, compliant.
Mode 2 is EN50131 grade 2 compliant.
*) The LED is off in a EN50131 grade 3 compliant system even if an indication is present. Insert the key and remove it to
check system status: the LEDs associated to active zones will light up for a few seconds (fixed or blinking).

DS1067-064C 18 LBT20065
1.5 1058/035 REMOTE CONTROL
Figure 7 - 1058/035 remote control
Ref. Description Use or indications provided
ATwo-colour red/green LED
•Red blinking = any key was pressed (the remote control will beep if the
control unit has received the control).
•Green fixed = any key was pressed and the low battery status of the
remote control is indicated.
Both indications disappear after short while.
Key 1
Arm Arms all associated zones.
Key 2
Programmable according
to control unit
This key can only be used to arm/disarm OUTPUT devices or to generate
four different alarm types: silent panic, panic, emergency, fire.
Key 3
Toggle arm/disarm Arms/disarms the associated zones using toggle function.
Key 4
Disarm Disarms all associated zones.
Note: The 1067/010 radio expansion must be installed in the control unit to use the remote control.
A

DS1067-064C 19 LBT20065
2 SYSTEM ACCESS
This chapter contains a description of the available system access codes, functions and programming.
2.1 SYSTEM ACCESS CODES
Access to given system functions is permitted according to the access code type (Master, User, Installer or Technical
Manager). The available codes are:
•Master code. This code is always enabled and is the only code authorised to enable other users, keys, timed
programming and remote access. It can be used to reset all the other access codes to the factory default (useful
if the changed access code is forgotten).
•Installer code. This code must be enabled each time by the Master code and is automatically deactivated when a
new valid code is entered or a valid key is used. This is to program the system and for maintenance. This code
is used by the installer. It can be used to reset all the other access codes to the factory default (useful if the
changed access code is forgotten).
IMPORTANT! The installer code will be automatically deactivated if any users enter their code while the
installer code is enabled. The same will occur if an electronic or proximity key is used.
•User code. This code must be enabled by the Master code and will remain valid until it is deactivated by the Master
code by a timed programmed control. This code is used by users for normal operations: arming and disarming
the system, displaying system status, reading event log and changing the access code.
•Technical Manager code. This code must be enabled by the Master code and is automatically deactivated when a
new valid code is entered or a valid key is used. It allows to access a limited number of system configuration
functions. It can be used to reset all the other access codes to the factory default (useful if the changed access
code is forgotten).
IMPORTANT! The Technical Manager code will be automatically deactivated if any user enters their code while the
Technical Manager code is enabled. The same will occur if an electronic or proximity key is used.
Each access code is freely programmable with a variable length from a minimum of four to a maximum of six digits. Each
user can change their access code at will.
IMPORTANT! Trough the use of the web server only 6-digit codes are allowed.
IMPORTANT! Any access code shorter than six digits will cancel the EN50131 grade 3 compliance of the entire
burglar alarm system.
If there are no other limiting factors, five or six digit access codes allow EN50131 grade 2 compliance.
Four digit codes will cancel EN50131 compliance.
ADVICE: All users, including the Master and Installer, should change their code before commissioning the system.
Always press to confirm the entered access code to access menus or functions.
On 1067/024, 1067/032A and 1067/052A control panels, starting from control panel SW version 1.01 and from keypad
SW version 1.03, if the hold-up function has been enabled (see paragraph 2.1.4 How to enable the hold-up function)
when user code is modified automaticaly, the system will also assing a code for the hold-up function which is the same
as the chosen one + 1 (for example, if 789456 has been chosen, the hold-up code will be 789457).
IMPORTANT! Enabling the hold-up function will cancel EN50131 compliance.

DS1067-064C 20 LBT20065
2.1.1 Default access codes
The 1067/024, 1067/032A and 1067/052A control panels are provided with default codes when they leave the factory.
The Installer and Technical Manager codes are enabled at the factory and automatically deactivated when a valid Master
or User code is entered for the first time.
Code type Level Default code Associated zones Enabled when
leaving the factory Enable time (once enabled)
Installer 3 000000 All Yes Temporary session
Master 2 111111 All Yes Permanent
User (2÷14) 2 000020-000140 Zone 1 No Until expressly
disabled
Technical
Manager 3 222222 All Yes Temporary session
Table 9 - Default access codes for 1067/024
Code type Level Default code Associated zones Enabled when
leaving the factory Enable time (once enabled)
Installer 3 000000 All Yes Temporary session
Master 2 111111 All Yes Permanent
User (2 ÷31) 2 000020-000310 Zone 1 No Until expressly
disabled
Technical
Manager 3 222222 All Yes Temporary session
Table 10 - Default access codes for 1067/032A
Code type Level Default code Associated zones Enabled when
leaving the factory Enable time (once enabled)
Installer 3 000000 All Yes Temporary session
Master 2 111111 All Yes Permanent
User (2 ÷62) 2 000020-000620 Zone 1 No Until expressly
disabled
Technical
Manager 3 222222 All Yes Temporary session
Table 11 - Default access codes for 1067/052A