US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS User manual

0
56K Message Modem
Quick Installation Guide for
Windows 95, 98, NT, 2000, Me, XP Operating
Systems
English
Français
Italiano
Deutsch
Model 5668B
Part Number R24.0319.00

1
U.S. Robotics Corporation
935 National Parkway
Schaumburg, Illinois
60173-5157
USA
No part of this documentation may be reproduced in any form or by any means or used to make any
derivative work (such as a translation, transformation, or adaptation) without written permission from
U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this documentation
and to make changes in the products and/or content of this document from time to time without obli-
gation to provide notification of such revision or change. U.S. Robotics Corporation provides this docu-
mentation without warranty of any kind, either implied or expressed, including, but not limited to,
implied warranties of merchantability and fitness for a particular purpose. If there is any software on
removable media described in this documentation, it is furnished under a license agreement included
with the product as a separate document, in the hard copy documentation, or on the removable media
in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please con-
tact U.S. Robotics and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this docu-
mentation and the software described herein are provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at private
expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-
7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with
only such rights as are provided in U.S. Robotics standard commercial license for the Software. Techni-
cal data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR
52.227-14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any
legend provided on any licensed program or documentation contained in, or delivered to you in con-
junction with, this Quick Installation Guide.
Copyright © 2002 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the U.S. Robotics
logo are registered trademarks of U.S. Robotics Corporation. Other product names are for identifica-
tion purposes only and may be trademarks of their respective companies. Product specifications sub-
ject to change without notice.
English

2

1
U.S. Robotics Corporation
935 National Parkway
Schaumburg, Illinois
60173-5157
Etats-Unis
Il est interdit de reproduire cette documentation, que ce soit en tout ou en partie, sous quelque forme
ou par quelque moyen que ce soit en vue d'effectuer des travaux dérivés (tels que traduction, transfor-
mation ou adaptation) sans la permission écrite de U.S. Robotics Corporation. U.S. Robotics Corpora-
tion se réserve le droit de revoir cette documentation et de modifier le produit et/ou le contenu de ce
document de temps en temps et sans préavis. U.S. Robotics Corporation fournit cette documentation
sans garantie implicite ou explicite d'aucune sorte, et notamment sans aucune garantie de commer-
cialisation et d'adaptation à un usage particulier. Si cette documentation décrit un logiciel sur support
amovible, ce dernier est soumis à un accord de licence inclus avec le produit sur un document séparé,
soit sur la documentation écrite soit sur le support amovible, dans un fichier répertoire appelé
LICENSE.TXT ou !LICENSE.TXT. Si vous ne parvenez pas à localiser un exemplaire, veuillez contacter
U.S. Robotics qui vous en fera parvenir un.
GOUVERNEMENT DES ETATS-UNIS Si vous êtes une agence du gouvernement des Etats-Unis, cette
documentation et le logiciel qu'elle décrit vous sont fournis aux termes des conditions suivantes :
Toutes les données techniques et les logiciels informatiques sont par nature commerciaux et dévelop-
pés uniquement sur des fonds privés. Le logiciel est fourni en tant que « Logiciel informatique
commercial », comme défini dans DFARS 252.227-7014 (juin 1995) ou en tant qu'« objet commercial »,
comme défini dans FAR 2.101(a) et est donc fourni avec les mêmes droits que ceux énumérés dans la
licence commerciale standard de logiciels U.S. Robotics. Les données techniques sont fournies avec
des droits limités, comme défini dans DFAR 252.227-7015 (nov 1995) ou FAR 52.227-14 (juin 1987), sui-
vant les cas. Vous vous engagez à ne pas retirer ou dégrader toute légende fournie sur un programme
ou une documentation sous licence contenu(e) dans ou livré(e) avec ce Guide d'installation rapide.
Copyright © 2002 U.S. Robotics Corporation. Tous droits réservés. U.S. Robotics et le logo
U.S. Robotics sont des marques déposées de U.S. Robotics Corporation. Tous les autres noms de pro-
duits sont utilisés à des fins d’identification uniquement et sont susceptibles d’être des marques de
leurs sociétés respectives. Les spécifications des produits peuvent être modifiées sans préavis.
Français

2

1
U.S. Robotics Corporation
935 National Parkway
Schaumburg, Illinois
60173-5157
USA
Questa documentazione non può essere né parzialmente né interamente riprodotta in alcuna forma o
utilizzata per ottenere opere derivate (quali traduzioni, trasformazione o adattamento) senza
l'autorizzazione scritta di U.S. Robotics Corporation. U.S. Robotics Corporation si riserva il diritto di
revisionare la presente documentazione e di apportare modifiche periodiche ai prodotti e/o al
contenuto di questo documento senza alcun obbligo di notifica. U.S. Robotics Corporation fornisce la
presente documentazione senza alcuna garanzia, implicita o esplicita, ivi comprese, ma non a titolo
esclusivo, garanzie implicite di commerciabilità e idoneità a scopi particolari. Se la presente
documentazione descrive del software su supporto rimovibile, esso viene fornito ai sensi di un
contratto di licenza accluso al prodotto come documento separato, nella documentazione permanente
o sul supporto rimovibile in un file chiamato LICENSE.TXT o !LICENSE.TXT. Qualora sia impossibile
individuare una copia della suddetta documentazione, rivolgersi a U.S. Robotics.
LEGENDA DELLA NORMATIVA DEGLI STATI UNITI La documentazione e il software descritti nel presente
accordo sono forniti agli enti governativi degli Stati Uniti con le restrizioni riportate di seguito.
Tutti i dati tecnici e il software per computer sono di natura commerciale e sono stati sviluppati
esclusivamente con fondi privati. Il software viene commercializzato come "Commercial Computer
Software" secondo la definizione data in DFARS 252.227-7014 (giugno 1995) o come "articolo
commerciale" secondo la definizione data in FAR 2.101(a) e come tale la sua fruizione è consentita solo
nei limiti dei diritti espressamente attribuiti nella licenza commerciale standard di U.S.Robotics per il
software. I dati tecnici vengono forniti con diritti limitati secondo quanto stabilito in DFAR 252.227-
7015 (novembre 1995) o FAR 52.227-14 (giugno 1987) laddove applicabile. L'utente si impegna a non
rimuovere od obliterare alcuna porzione di qualsiasi legenda presente in qualsiasi programma
concesso in licenza o documentazione contenuta nella guida rapida all'installazione o fornita con
essa.
Copyright © 2002 U.S. Robotics Corporation. Tutti i diritti riservati. U.S. Robotics e il logo di U.S.
Robotics sono marchi registrati di U.S. Robotics Corporation. Gli altri nomi di prodotti sono usati
esclusivamente a scopo identificativo e possono essere marchi delle rispettive società. Le specifiche
dei prodotti sono soggette a modifica senza preavviso.
Italiano

2

1
U.S. Robotics Corporation
935 National Parkway
Schaumburg, Illinois
60173-5157
USA
Kein Teil dieser Dokumentation darf ohne schriftliche Genehmigung der U.S. Robotics Corporation in
irgendeiner Form oder mit irgendwelchen Mitteln vervielfältigt oder für irgendwelche Weiterbearbei-
tung (beispielsweise Übersetzung, Konvertierung oder Anpassung) verwendet werden. Die U.S. Robot-
ics Corporation behält sich das Recht vor, diese Dokumentation von Zeit zu Zeit zu überarbeiten und
Veränderungen an den Produkten und/oder dem Inhalt dieser Dokumentation vorzunehmen, ohne
eine solche Überarbeitung bzw. Änderung mitteilen zu müssen. Die U.S. Robotics Corporation liefert
diese Dokumentation ohne jegliche Garantie, weder stillschweigend noch ausdrücklich, einschließlich,
jedoch nicht beschränkt auf stillschweigende Garantien der handelsüblichen Qualität und Eignung für
einen bestimmten Zweck. Software, die wie in dieser Dokumentation beschrieben auf Wechselspei-
chermedien geliefert wird, unterliegt einem Lizenzvertrag. Dieser liegt dem Produkt als eigenes Doku-
ment, als gedruckte Dokumentation oder auf dem Wechselspeichermedium in einer Datei namens
LICENSE.TXT oder !LICENSE.TXT bei. Falls Ihnen kein Exemplar vorliegt, können Sie eines von U.S.
Robotics anfordern.
HINWEISE FÜR BEHÖRDEN DER VEREINIGTEN STAATEN: Für eine Verwendung bei Behörden der Vere-
inigten Staaten muss bezüglich der Dokumentation und der hierin beschriebenen Software Folgendes
beachtet werden:
Alle technischen Daten und die Computer-Software sind gewerblicher Natur. Die Entwicklung wurde
rein aus privater Hand finanziert. Die Software wird als „Computer-Handelssoftware“ gemäß Definition
in DFARS 252.227-7014 (Juni 1995) oder als „Handelsartikel“ gemäß Definition in FAR 2.101(a) ausge-
liefert. Insofern beinhaltet sie nur die in der standardmäßigen Handelslizenz für die Software von U.S.
Robotics vorgesehenen Rechte. Die technischen Daten unterliegen, je nach Anwendbarkeit, nur den in
DFAR 252.227-7015 (Nov 1995) oder FAR 52.227-14 (Juni 1987) niedergelegten eingeschränkten
Rechten. Sie verpflichten sich, keinen Teil einer Vorschrift, die mit einem lizenzierten Programm oder
der Dokumentation, die mit diesem Programm oder zusammen mit dieser Anleitung zur Schnellinstal-
lation ausgeliefert wird, zu löschen oder zu streichen.
Copyright © 2002 U.S. Robotics Corporation. Alle Rechte vorbehalten. U.S. Robotics und das U.S.
Robotics Logo sind eingetragene Marken der U.S. Robotics Corporation. Alle weiteren Produktbezeich-
nungen werden nur zur Identifizierung verwendet und sind möglicherweise Marken der jeweiligen Her-
steller. Produktspezifikationen können ohne vorherige Ankündigung geändert werden.
Deutsch

2

1
Table of Contents
English .................................................................. 1
Français................................................................. 15
Italiano.................................................................. 31
Deutsch................................................................. 45

2

1
1
Installation for All Operating Systems:
Before You Begin: Prepare for installation.
Before you begin, we recommend you uninstall any other modems you
have in your system. Refer to your previous modem's documentation
for instructions.
Write down your new U.S. Robotics modem's serial number, which is located on
the white bar code sticker on the modem and on the modem's box, in the space
below. If you ever need to call our Technical Support department, you will need
this number to receive assistance.
Step 1: Connect the modem to the computer.
Shut down your computer and connect the serial cable to the modem and the
computer. To find the serial port on the back of your computer, look for COM,
MODEM, RS-232, |o|o|, or SERIAL. Do not use the AUX, GAME, LPT, or PARALLEL
ports.
Step 2: Connect the modem to an analogue phone line and plug
in the modem’s power supply.
Plug one end of the provided phone cord into the jack on the modem and
plug the other end into an analogue phone wall jack.
The phone socket you use must be for an analogue phone line. Most
office phones are wired through DIGITAL lines. Be sure you know what
type of line you have. The modem will be damaged if you use a digital
phone line.
Plug the power supply into the jack on the modem and the other end into
an electrical outlet. Plug your headset into the jack on the modem. Turn on
the modem. The power button is located on the side of the modem.
If the CS light is not on, the modem may not be turned on or plugged in
properly. Make sure the modem is turned on and that the power supply
is connected between the modem and the electrical outlet.
Step 3: Install the modem drivers.
If you have Windows 95/98 operating systems:
Turn your computer on. After the New Hardware Wizard detects your modem,
insert the Installation CD-ROM into your CD-ROM drive. Follow the on-screen

2
2
prompts to complete the installation. If you are asked for the location of your CD-
ROM drive, type the letter of your CD-ROM drive and a colon (D: if your drive
letter is D).
If you have Windows Me:
Turn your computer on. After you see a message that your new modem has been
detected and installed, insert your Installation CD-ROM into your CD-ROM drive.
Click Start, select Settings, then click Control Panel. Click View all Control Panel
Options in the upper-left corner of your screen. Double-click the System icon.
Click Device Manager. Expand Modems by clicking +. Double-click the
description of your new modem, then click the Driver tab. Click Update Driver.
Select Specify the location of the driver (Advanced). Click Next. Select
Removable media. Click Next. Select U.S. Robotics 56K Message V.92. Click
Next. Click Finish to complete the installation. Click Close on the U.S. Robotics
56K Message V.92 screen. Windows will now detect the Wave Device for Voice
Modem. Select Specify the location of the driver (Advanced). Click Next. Select
Removable media. Click Next. Select U.S. Robotics Half-Duplex Audio Device.
Click Next. Click Finish to complete the installation.
If you have Windows NT:
Windows NT users must be in administrator mode to properly add any
new hardware.
Turn your computer on. Insert your Installation CD-ROM into your CD-ROM drive
before you log in. Click Start, point to Settings, and click Control Panel. Double-
click Modems. When the Install New Modem screen appears, click Next to have
Windows detect your new modem. When your modem is detected, click Change.
Click Have Disk. Make sure the location of your CD-ROM drive is selected. Click
OK. Select U.S. Robotics. Select U.S. Robotics 56K Message V.92 (non-PnP).
Click OK and then Next. Click Finish. The Modems Properties tab will display the
COM port that is assigned to your modem. Click Close. If the System Settings
Change window appears, click Yes to restart your computer.
If you have Windows 2000:
Windows 2000 users must be in administrator mode to properly add any
new hardware. Your modem will be automatically installed. Follow the
update driver procedure below.
Turn your computer on. After you see a message that your new modem has been
installed, insert your Installation CD-ROM into your CD-ROM drive. Click Start,
select Settings, then click Control Panel. Double-click the System icon. Click the
Hardware tab. Click Device Manager. Expand Modems by clicking +. Double-

3
3
click the description of your new modem or Standard Modem if there is no
specific description, then click the Driver tab. Click Update Driver. Click Next.
Select Search for a suitable driver for my device. Click Next. Select Specify a
location. Click Next. Select CD-ROM drive. Click Next. Select Install one of the
other drivers, then click Next. Select U.S. Robotics 56K Message V.92. Click
Next. A Digital Signature Not Found message will appear. Click Yes. Click Finish
to complete the installation.
If you have Windows XP:
Windows XP users must be in administrator mode to properly add any
new hardware. Your modem will be automatically installed. Follow the
update driver procedure below.
Turn your computer on. Insert your Installation CD-ROM into your CD-ROM drive.
Click Start then click Control Panel. If you are not in Classic View, switch to
Classic View now by clicking the selection in the upper-left corner of your screen.
Double-click the System icon. Click the Hardware tab. Click Device Manager.
Expand Modems by clicking +. Double-click the description of your new modem
or Standard Modem if there is no specific description, then click the Driver tab.
Click Update Driver. Select Install from a Specific Location (Advanced). Click
Next. Select Don’t search. I will choose the driver to install. Click Next. Click
Have Disk. Type the letter of your CD-ROM drive and a colon (D: if your drive
letter is D). Click OK. Select the description of your modem, then click Next. If you
see a warning telling you that this modem has not passed logo testing, click
Continue Anyway. Click Finish.
All Windows Operating Systems:
V.92 Features
Would you like to install the ControlCenter software?
The ControlCenter software allows you to configure your V.92 modem settings
and automatically notifies you of any updates to your modem’s code.
• To install the ControlCenter software, eject and reinsert the Installa-
tion CD-ROM into your CD-ROM drive. If the Installation CD-ROM inter-
face does not run automatically, click Start and then click Run. In the
Run dialogue box, type D:\setup.exe. If your CD-ROM drive uses a dif-
ferent letter, type that letter in place of D.

4
4
• Choose the Software option, select U.S. Robotics ControlCenter, and
then follow the on-screen instructions to install the ControlCenter
software.
Would you like to install the Internet Call Notification software?
Internet Call Notification lets you take an incoming voice call without dropping
your Internet connection.
• To install the Internet Call Notification software, eject and reinsert the
Installation CD-ROM into your CD-ROM drive. If the Installation CD-
ROM interface does not run automatically, click Start and then click
Run. In the Run dialogue box, type D:\setup.exe. If your CD-ROM drive
uses a different letter, type that letter in place of D.
• Choose the Software option, select U.S. Robotics Internet Call Notifi-
cation, and follow the on-screen instructions to install the Internet
Call Notification software.
Register your modem.
• At the Installation CD-ROM interface, click the Support link. Follow the
on-screen instructions to register your modem and to view the war-
ranty information. If the Installation CD-ROM interface does not run
automatically, click Start and then click Run. In the Run dialogue box,
type D:\setup.exe. If your CD-ROM drive uses a different letter, type
that letter in place of D. You can also register online at
http://www.usr.com/productreg.
Troubleshooting
If you have any difficulty with your modem, first make sure that
it was installed correctly.
Windows Me, 98, 95
• Click Start, Settings, and then Control Panel.
• Double-click the Modems icon. In the Modems Properties screen, you
should see a description for your new U.S. Robotics modem. If you do
not see a description of your modem, see the Note at the end of this
section.

5
5
• Click the Diagnostics tab. Make sure that the correct COM port
(modem) is selected.
•ClicktheMore Info button. You should see a series of commands and
responses from the modem. This means that the installation was a
success. If you do not see commands and responses, shut down and
restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the additional troubleshooting in this Guide.
Windows NT
Windows NT users must be in administrator mode to properly add any new
hardware.
• Click Start, Settings, and then Control Panel.
• Double-click the Modems icon. In the Modems Properties screen, you
should see a description for your new U.S. Robotics modem. If you do
not see your modem listed, shut down and restart your computer. To
determine if your modem is functioning properly, try reinstalling your
modem. If your modem is still not working, refer to the additional
troubleshooting in this Guide.
Windows 2000
Windows 2000 users must be in administrator mode to properly add any new
hardware.
• Click Start, Settings, and then Control Panel.
• Double-click the Phone and Modem Options icon. Click the Modems
tab. Make sure that your new U.S. Robotics modem is selected. If you
do not see a description of your modem, see the Note at the end of
this section.
•ClicktheProperties button.
• Click the Diagnostics tab.
•ClicktheQuery Modem button. You should see a series of commands
and responses from the modem. This means that the installation was
a success. If you do not see commands and responses, shut down and
restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the additional troubleshooting in this Guide.
Windows XP
Windows XP users must be in administrator mode to properly add any new
hardware.
• Click Start and then click Control Panel.
• Click Phone and Modem Options and then click the Modems tab. You
should see a description of your new U.S. Robotics modem and a

6
6
COM port setting. If you do not see a description of your modem, see
the Note at the end of this section.
• Click Modem, highlight the description of your new modem, and click
Properties.
• Click the Diagnostics tab.
•ClicktheQuery Modem button. You should see a series of commands
and responses from the modem. This means that the installation was
a success. If you do not see commands and responses, shut down
and restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the additional troubleshooting in this Guide.
NOTE: If your modem is not listed and/or you do not see a series of
commands and responses, make sure that your cables are attached
correctly to your computer. If your modem still does not work, refer to
the additional troubleshooting in this Guide. Shut down and restart your
computer. To verify that your modem is functioning properly, repeat the steps
listed under your specific operating system.
For additional troubleshooting help, review these common
issues:
PROBLEM: My computer isn’t recognizing my modem.
Possible solution:
You may be using a COM port that is either already in use or not configured
correctly. For the modem to work properly, it must be plugged into an enabled
serial port which is assigned to a free COM port. Most computers have two serial
ports assigned to COM 1 and COM 2 respectively.
Windows XP, 2000
Make sure your COM port is not already in use by another modem. Click Start,
Settings (for Windows 2000 only), and Control Panel, and then double-click
Phone and Modem Options. Click the Modems tab. Look for a listed modem and
check which COM port it is using. If a previous modem is already using the
available COM port, you can either use another COM port or uninstall the modem
that was installed previously. See your previous modem’s manual for
uninstallation instructions. Next, make sure that your COM ports are configured
correctly. Right-click the My Computer icon on your desktop. Click Properties.
Click the Hardware tab. In the Device Manager section, click the Device Manager
button. Look under Ports (COM and LPT). If the Communications ports have
yellow exclamation points or red Xs over them, your COM ports may be
configured incorrectly. If this is the case, you may need to contact your computer
manufacturer. It is also possible that you may be plugging your external

7
7
modem’s cable into a disabled serial port. Refer to your computer’s manual for
information about enabling COM ports. This usually involves altering the BIOS
settings and possibly the operating system. You may need to call your
computer’s manufacturer to change your BIOS settings if they are incorrect.
Windows Me, 98, 95
Make sure your COM port is not already in use by another modem. Click Start,
Settings, and Control Panel, and then double-click Modems. If you have
Windows Me and you do not see this icon, be sure to select View All Control
Panel Options. Look for another modem listed and if another modem is listed,
click the Diagnostics tab to find out which COM port it is using. If a previous
modem is already using the available COM port, you can either use another COM
port or uninstall the previously installed modem. See your previous modem’s
manual for uninstallation instructions. Next, make sure that your COM ports are
configured correctly. Right-click the My Computer icon on your desktop. Click
Properties. Click the Device Manager tab. Look under Ports (COM and LPT). If the
COM ports have yellow exclamation points or red Xs over them, your COM ports
may be configured incorrectly. If this is the case and you are not sure how to
properly configure your COM ports, contact your computer manufacturer.
It is also possible that you may be plugging your RS-232 modem cable into a
disabled serial port. Refer to your computer’s manual for information about
enabling COM ports. This usually involves altering the BIOS settings and
possibly the operating system. You may need to call your computer’s
manufacturer to change your BIOS settings if they are incorrect.
Windows NT
Click Start, Settings, and then Control Panel. Double-click Ports. Make sure the
port you are plugging the modem into appears in the list. If it does not, the port
needs to be added, and possibly enabled in the BIOS. Consult your Windows NT
manual for information about adding ports. After you add or enable the port,
follow the instructions in this Guide for your operating system.
PROBLEM: My software isn’t recognizing my modem.
Possible solution:
Your communications software may not function properly if you have more than
one version of the software installed or if you are using an older version. We
highly recommend using the communications software provided with your
modem on the Installation CD-ROM.
Possible solution:
Make sure the modem is plugged in and turned on. If it is, check the outlet with
another electric device (like a lamp) to be sure that you are getting power. Also,
you must use the power supply that came with your modem; other similar-

8
8
looking power supplies may be of different voltages and could damage your
modem. When your modem is properly connected to an electrical outlet, a wall
outlet, or a surge protector and is turned on, the CS light on the front panel will
be illuminated.
Possible solution:
Windows XP, 2000
You may not have the correct modem type selected in your software or in
Windows. Click Start, Settings (Windows 2000 only), and then Control Panel.
When Control Panel opens, click Phone and Modem Options. Click the Modems
tab. Here you will see a list of installed modems. You can also add, remove, or
view the properties of modems from this window. The U.S. Robotics modem you
have installed should be present in the list of installed modems. If none of the
modem descriptions in the list matches your U.S. Robotics modem or no
modems are listed, your modem is not properly installed. Try reinstalling your
modem using the instructions on this Guide for your operating system.
Windows Me, 98, 95, NT
You may not have the correct modem type selected in your software or in
Windows. Click Start, Settings, and Control Panel. When Control Panel opens,
double-click Modems. Here you will see a list of installed modems. You can also
add, remove, or view the properties of modems from this window. The U.S.
Robotics modem you have installed should be present in the list of installed
modems. If none of the modem descriptions in the list matches your U.S.
Robotics modem or no modems are listed, your modem is not properly installed.
Try reinstalling your modem using the instructions in this Guide for your
operating system.
Possible solution:
Windows XP
If you are using Dial-Up Networking, it may not be configured correctly. Check
your configuration and make sure you have the correct port selected. Click Start,
Control Panel, and double-click Network Connections. Double-click the
description of the dial-up networking connection, and select Properties. Make
sure that the description in the Connect Using box (under the General tab)
matches the description of the modem you are using. If it doesn’t match, select
the proper modem description.
Windows 2000
If you are using Dial-Up Networking, it may not be configured correctly. Check
your configuration and make sure you have the correct port selected. Click Start,
point to Settings, and click Network and Dial-up Connections. Make sure that
the description in the Connect Using box (under the General tab) matches the
description of the modem you are using. If it doesn’t match, select the proper
modem description.