US Steam BlueEvolution XL+ TS User manual

1
US STEAM®
2440 Chambers Street, Ste A Venus, Texas 76084
[phone] / ussteam.net
TM 1
User Manual
INFO:
To ensure that your cleaning
equipment can continue to
operate reliably and smoothly,
please change the O-rings
approx. every 6 months.
See: Service/Maintenance Section 3

2
14 15
Technical data
BlueEvolution XL+ TS
Electrical connection
Nominal voltage 380-415 VAC 50-60 Hz
Total output 7200 W
Boiler nominal consumption (2000 x 3) W
(Boiler made from stainless
steel INOX Aisi 304)
Automatic refill system Yes, 3 litres
Steam temperature max. 184 °C
Steam pressure max. 10.0 bar (1000 kPa)
Motor nominal consumption 1200 W
Water filter max. fill level approx. 3.3 litres
Water filter difference min. to max approx. 1.3 litres
Underpressure 1700 mm H2O
Length steam suction hose approx. 3.2 metres
Weight approx. 45 Kg
Size (l x w x h) 720 x 380 x 930
Hand-arm vibration emission < 2,5 m/s2
Sound pressure level (LWA) < 70,0 dB(A)
Sound power level (LWA) 86,0 dB(A)
k uncertainty pA 2,11 dB(A)
Safety test CE
incl. hot water module 3 litres for the stubbornest dirt
The manufacturer reserves the right to make technical changes or changes to accessories in the course of further development.
POWER SUPPLY
480
V. 60Hz
READY TIME
5 MINUTES
BOILER REFILL SYSTEM
AUTOMATIC REFILL
STEAM FLOW ADJUSTMENT
3 LEVELS / ADJUSTED ON CONSOLE
PRESSURE
10 BAR / 145 PSI
MAX TEMPERATURE
363
°F
BOILER VOLUME
1/2 GALLON
BOILER MATERIAL
AISI 304
WATER TANK CAPACITY
3/4 GALLON
–INTERNAL TANK
DETERGENT/ TANK CAPACITY
3/4 GALLON
–INTERNAL TANK
VACUUM RECOVERY CAPACITY
2.2 GALLON / WATER FILTRATION SYSTEM
VACUUM POWER ADJUSTMENT
YES, 3 LEVELS
BOILER POWER
1700 W
AIR FLOW
95 m3/h
-56 CFM
DIMENSIONS L x W x H
28
“ x15 “ x37 “
HOSE LENGTH
30
FT
NET WEIGHT
100 lbs

3
2 3
Assembly (Collection Tank, Handle, and Toolbox) ________________________________________ 7
Quick Start
Steam _______________________________________________________________________ 9
Extraction ____________________________________________________________________ 10
Vacuum ______________________________________________________________________ 10
Extraction ______________________________________________________________________ 13
Accessories ____________________________________________________________________ 14
Troubleshooting / Error Codes _______________________________________________________ 15
Maintenance -Descaling ___________________________________________________________ 16
Maintenance – O-Rings _____________________________________________________________ 26
Notices _________________________________________________________________________ 27
Warranty & Repair ________________________________________________________________ 28
ØD0 NOT leave the steam cleaner unattended while plugged in
ØTurn off all controls and unplug the electrical cord when not in use
ØDO NOT use with a damaged cord or plug
ØIf the steam cleaner is not working as it should, has been dropped, damaged, left outdoors or
dropped into water, call for service before using
ØNEVER attempt to disassemble this steamer
ØDO NOT handle the electrical plug with wet hands
ØDO NOT use near children
ØDO NOT pull or carry by power cord
ØKeep cord away from heated surfaces
ØALWAYS set safety switch on hose handle into the locked position when not in use
ØNot setting safety switch to locked position could result in an injury
ØKeep body, hands, and feet away from accessories or nozzle when steam is in active use
ØALWAYS test a small area before cleaning a large area on any type of surface to make sure no
damage will occur
ØThe steam cleaner should be the only appliance plugged into an outlet
ØUse only a 12 gauge / 15 AMP rated or higher rated extension cord with max length of 25ft
ØAny alteration of electrical cord supply on this steam cleaner will void all warranties

4
2 3
Industry
From carpets to upholstery
The BlueEvolution cleans almost
any surface – streak-free and deep.
Retail
Gleaming sales areas
Tough dirt and odours vanish in no time
at all. Health
Hygienic surfaces
The hot steam thoroughly cleans your practice
rooms with little effort and a big impact for your
patients.
Restaurants
No scrubbing, no chemicals
The BlueEvolution also dissolves fat
in hard-to-reach places – with no strong
cleaning products.
Clean desks
Door handles, conference tables, floors, kitchen
areas – the BlueEvolution guarantees
a clean, germ-free work environment.
Offices
Gyms, saunas and spas
It's good for people to sweat. And thanks to the
BlueEvolution it's no longer a problem
for others. All equipment and contact
surfaces can be cleaned perfectly.
Wellness
für alle Branchen
Putzrevolution
And many more possibilities for use ...
The revolution in commercial cleaning
The BlueEvolution is more flexible than any other professional steam cleaner. Both
the steam and suction power have 3 settings. You can also regulate the hot water
inflow continuously using a control valve, which allows you to set the soaking effect
on the device individually.
Full power for a greater clean.
Kind to the environment.
The BlueEvolution is kinder to the environment than almost any other cleaning system. It is only
filled with clear water and minimises water consumption thanks to the steam pressure. There is no
need for any harmful or really aggressive chemicals.
The applications of the BlueEvolution are practically limitless. The BlueEvolution really comes into
its own in areas of high public traffic. Even large areas can be cleaned efficiently and quickly with
little effort. Pathogens don't stand a chance!
Make steam
Cleaning revolution for all industries
HACCP qualification certifies the highest cleaning power

5
4 5
Important Advice for Users
Congratulations on the purchase of this product.
Your choice confirms your strong technical knowledge and your excellent taste.
Ultimately, you have chosen a high-tech product, which has been manufactured
using only materials of the highest quality.
Please take the time to read the User Manual carefully before starting your new
appliance and keep the Manual to hand so that you can refer to it in the future.
This Manual contains the information you need for proper use, correct operation,
appropriate cleaning, care and maintenance of the appliance.
It is essential that you are familiar with and follow the instructions in the Manual
to ensure risk-free use, as well as your own safety during operation, cleaning,
care and maintenance. This User Manual cannot foresee every conceivable use
of the appliance.
If you would like more information or if specific problems arise that are not
covered in sufficient detail in this User Manual, then please contact the manu-
facturer directly to request the necessary information.
1. Description of equipment
The BlueEvolution impresses thanks to its ease of use, sophisticated technology
and diverse range of applications. It sets new standards in terms of hygiene and
cleaning, makes the job much easier and saves time, drastically reduces the use
of harmful cleaning agents that are bad for the environment, and ensures perfect
cleanliness and a healthy feel-good ambience.
2. Purpose of use
The BlueEvolution can be used for thorough cleaning of surfaces and objects and
to clear unpleasant odours from the air indoors.
3. Safety instructions
3.1 Safety warnings for the UV-C lamp UV
Warning! This appliance contains a UV emitter. Do not look directly into the
source of light.
Warning! Do not switch on the UV light if it is outside the appliance's protective
housing. The appliance may emit harmful UV-C radiation if not used
properly. Even small doses of UV-C radiation may cause damage to
eyes and skin. Users are NOT permitted to replace the UV-C lamp.
3.2 Warnings
• The appliance may only be operated by people who are familiar with its use.
Remember that the steam jet may cause damage if used incorrectly.
• The appliance must not be used by children. Children do not understand the
risks that may arise when dealing with electrical equipment and, therefore,
children must never be left unattended with such equipment.
• Never use a faulty appliance or an appliance with a damaged power cable.
• Do not put cleaning agents, perfume or other chemical substances into the
tank.
• Warning! Do not suction flammable or explosive substances or hot ash!
• Never immerse the appliance in water or other liquids. Never spray the appli-
ance with water.
• Never touch the steam jet. Risk of burning!
• Never aim the steam jet at people or animals. Nor at electrical sockets, con-
nections or equipment. Risk of burning!
• Do not use the appliance if other people are present in the working area.
• Refrain from any unsafe working methods.
• Do not use the steam jet for direct cleaning of electronic equipment (e.g. com-
puters, televisions, telephones etc.).
• Before cleaning ovens, fridges etc. always disconnect the power first to ensure
these are switched off. You must follow the manufacturers' specific instruc-
tions.
• Warning! The appliance may not be used to clean items that contain asbestos
or other harmful substances.
• Caution! In the following instances steam may not be used or may only be
used with the greatest care: on objects made from leather, Alcantara, velours
or other sensitive materials, on waxed or painted surfaces, polished wood sur-
faces and for direct contact with bonding agents or silicone. Please always
follow the manufacturer's instructions. For sensitive materials carry out a test
first on a sample or on an inconspicuous, concealed area. Always start on the
lowest setting. Pre-heat windows or other glass surfaces with a low steam
setting from a distance of approx. 30 cm and clean in combination with suc-
tion.
3.3 Precautionary measures
• Operation of the appliance is subject to national regulations.
• Always ensure the appliance is in proper working order before starting up.
• Perform regular checks on the power cable, plug and steam suction hose for
damage or signs of wear.
• Do not start the appliance if the steam suction hose or power cable are da-
maged.
• Place the appliance on a stable and level surface. Never place it on warm or
hot surfaces. Choose somewhere that is not accessible to children or pets.
• Do not position the appliance in direct proximity to heat sources (fires, heaters
or other heat-emitting objects).
• Position the appliance somewhere with good air circulation to prevent over-
heating.
• Never expose the appliance to the weather (rain, snow, frost etc.).
• Never touch the appliance, plug or electrical cables with wet hands or feet.
• Do not bend, squeeze or run over the steam suction hose.
• Never pull on the power cable or on the appliance itself when disconnecting
the mains plug.
• Protect the power cable from heat sources, steam and oil, and from damage
by avoiding pulling, squeezing or running over the cable.
• Never leave the appliance unattended when it is connected to the mains.
• To prevent unauthorised use of the appliance, ensure all switches are off and
the power is disconnected during breaks.
• Always disconnect from the mains before cleaning and maintenance work.
• Only perform maintenance work that is described in the User Manual. Only use
original spare parts and accessories.
• Do not undertake any technical modifications on the appliance.
• Never repair or open the appliance yourself. Repairs may only be performed
by authorised personnel.
• Take the appropriate precautions when using acidic descaling agents. Protect
sensitive surfaces, especially natural stone and wood, from spray and droplets.
• Some drops of condensation may form at the start of steam cleaning – wipe
these up with a cloth.
INFO: To minimise the occurrence of condensation (caused when the steam
hose and attachments are not at operating temperature) it is recom-
mended that you allow the steam to flow for a few seconds on the
maximum setting before starting the cleaning work. This ensures the
steam hose and attachments heat up more quickly.

6
4 5
➊Driving handle
➋Locking screw driving handle
➌Locking lever driving handle
➍Display
➎ Socket steam suction hose
➏ Drain plug water tank
➐Drain plug hot water module
➑Main switch
➒Filler holes
➓ Accessories box
AON/OFF button boiler
BON/OFF button suction
CON/OFF button hot water module
Description of equipment
1
2
3
4
5
67
9
10
➑Main switch
A B C
STEAM VACUUM
PAUSE
WATER
Status:
MENU STANDBY

7
6 7
Assembly / preparation
Assembly of the driving handle and
accessories box
Attach the handle using the two fixing knobs. Tighten them
by turning clockwise.
Engage the two locking levers so the handle is secured pro-
perly.
Insert the accessories box
Position the box in its place. Fix the two knob.
Fill the reservoir O
Fill the hot water module P
• Open the cap O and fill the water tank with normal tap
water using the funnel.
• Re-close the tank cap.
• Fill the tank P for the hot water module, likewise with
normal tap water. If your water is particularly hard, you
may also use distilled water mixed with tap water in this
tank.
• Re-close the tank cap. You can check the fill level of the
tanks using the volume indicator on both sides of the ap-
pliance.
P O
LEVEL

8
6 7
Filling the filter bowl
Your appliance is fitted with a hygienic water filter. You must
fill the filter bowl with water before starting, in order to bind
the extracted dirt in the water and to clean the suctioned air
in the water bath as well.
• Loosen the clips on the filter bowl and pull out of its slot.
• Open the cover on the filter bowl by pushing off the rele-
vant clips.
• Fill with tap
water
up to the
green line
(approx.
2.0 litres).
• Re-close the cover on the filter bowl. Insert the filter bowl,
ensuring it is in the correct position.
WARNING:
Insert the filter bowl correctly on the bottom rails to make
sure the fill level sensor is properly engaged.
The filter bowl is equipped with fill level sensors. Suction
stops automatically once the maximum fill level is reached
and “E04” error will appear on the display.
INFO:
If you only wish to suction liquid, such as accidental water
spills, it is not necessary to fill the appliance's filter bowl with
water.
When sucking liquids, the MAX. capacity in the container is
approx. 4 litres.
Inserting the steam suction hose
• Insert the connector of the steam suction hose into the
socket until you hear the click of the safety hook.
• To remove the hose from the appliance, press release but-
ton A and pull on the connector
The following combined functions are
possible depending on the application
area:
• Steam cleaning
• Steam cleaning with hot water
• Suction
• Suction and steam cleaning (steam suction)
• Suction and steam cleaning with hot water function
Assembly / preparation
A
PULL
+

9
8 9
Start-up steam
Insert the mains plug into the wall socket.
Turn the general switch 8to ON,
the display will light up showing the menu and will remain
in stand-by waiting for a function to be selected by the user,
differently, the display will switch to energy saving after 60
seconds (Standby).
If the machine was in Standby status press the start icon.
Press the “STEAM” icon to start the boiler. During the
heating stage, it is possible to display the temperature and
pressure which gradually raise up to the operating condi-
tions.
During this stage, the “STEAM” icon will blink and the dis-
play status will show “HEATING”.
Steam Function End
Press the “STANDBY” icon to stop the appliance.
The display will show the “STANDBY” icon.
Steam Function
Press and hold the steam button Pon the handle to de-
liver steam. You can adjust the steam function by pressing
the
T2-
or
T2+
buttons on the side of the handle.
There are 3 steam modes to choose from:
Mode 1 = Minimum steam flow, for use on sensitive sur-
faces such as wood, parquet floors, upholstery, etc.
Mode 2 = Medium steam flow, for use on windows, glass,
tiles, stones, etc.
Mode 3 = Maximum steam flow, to be used on all surfaces
that were previously treated with detergents and/or water
such as tiles, granite, stainless steel etc.
The selected mode is shown on the display by the notches
inside the "STEAM" icon.
WARNING:
Water droplets may occur on first use, which may be due to
incomplete heat stabilisation in the housing. For this reason,
we recommend aiming the first steam jet at a cloth until an
even flow of steam is achieved.
INFO:
For sensitive materials carry out a test first on a sample
or on an inconspicuous, concealed area. Always start with
mode 1 (minimal steam volume).
P
T2
➑
STEAM VACUUM
HEATING
WATER
Status:
MENU STANDBY

10
8 9
Start-up steam with hot water module Start-up suction
The soaking effect and, thus, cleaning performance can be
increased for heavy soiling by switching the hot water mo-
dule to steam.
INFO:
Do not use on sensitive surfaces or materials.
Switching on “hot water module”
Pressing button
T4
on the handle for the hot water module
switches the function on and symbol Non the display stays
illuminated.
Always use button
T4
on the handle to switch the hot water
module on and off.
T3
T4
The "hot water module" flow-through can be adjustet, by
pressing the button
C
in three steps. This is displayed by
notches
markedwith 1-2-3 inside the “WATER” icon.
Suction
Press the “VACUUM” icon on the display or the button
T3
for activating or deactivating the suction.
Keep the “VACUUM” icon pressed to switch between the
three suction flows: MINIMUM-MEDIUM-MAXIMUM (the
flow is displayed by notches marked with 1-2-3 inside the
"MOTOR" icon).
Briefly press the
T5-
or
T5+
button on the side to change the
suction power.
Briefly press the T3 button to turn off the suction function
again.
INFO:
As there is liquid in the hose and in the extension pipes du-
ring suction operation, the sucker should not disconnected
immediately after cleaning finishes.
A short delay (approx. 30 seconds) is required.
T5
STEAM VACUUM
HEATING
WATER
Status:
MENU STANDBY
STEAM VACUUM
PAUSE
WATER
Status:
MENU STANDBY

11
12 13
Reports
Maximum fill level in the filter bowl
If the suctioned dirt in the filter bowl reaches the maximum
level, the fill level sensors ensure that suction stops automa-
tically.
To continue with cleaning work:
• Remove the filter bowl, empty and fill with tap water up
to the MAX. level indicated, using the integrated siphon
within the filter bowl (approx. 2.0 litres)
• Re-insert the filter bowl, ensuring it is in the correct posi-
tion.
WARNING:
Regularly remove and clean the installation parts from the
filter bowl in the event of heavy soiling. Return to the correct
position afterwards.
Lack of water in the tank
A lack of water in the tank is indicated by the error E01
shown on the display and by an acoustic signal at the same
time.
To resume work, follow the instructions on the display, by
clicking in the “Tap for other info” area.
Lack of water washing-extraction func-
tion
A lack of water in the tank is indicated by the error E02
shown on the display and by an acoustic signal at the same
time.
To resume work, follow the instructions on the display, by
clicking in the “Tap for other info” area.
Tap fo r
other
info
Error:
MENU STANDBY
Refill hot water tank
Tap fo r
other
info
Errore:
MENU STANDBY
Refill water tank
Tap fo r
other
info
Error:
MENU STANDBY
Empty waste tank

12
12 13
Shutting down
To ensure the functionality, cleanliness and hygiene of the
appliance and accessories, follow this procedure to shut
down the appliance:
1) Remove the filter bowl, empty out the water and re-insert.
2) Set suction mode to MIN (one notch inside the "MOTOR"
icon).
3a) Cleaning of steam hose and accessory parts In suction
mode 1, flush approx. 2 litres of cleaning fluid with a mild
alkaline cleaning solution through the used accessory
parts (steam hose, extension pipes etc.) to clean them.
3b) Disinfecting the steam hose and accessory parts We
recommend you flush a VAH-listed, peroxide-based sur-
face disinfectant through the accessory parts in suction
mode 1.
See the manufacturers' information for application times.
INFO:
Repeat the rinsing process with clear water if there is a lot
of foam.
Alternatively, the steam suction hose can also be cleaned
using a suitably sized sponge soaked in disinfectant.
4) Empty the filter bowl, clean and re-insert without cover.
5) Switch off the functions you have selected by pressing the
relevant buttons on the display. The appliance switches
off after approx. 10 seconds. OFF is then shown on the
display.
6) Disconnect from the mains power by pulling out the plug.
7) Pull the steam suction hose out of the appliance for it to
dry out.
8) Store the appliance with open filter bowl in a well ventila-
ted and frost-free room.
T5

13

NO ATTACHMENT
Carpet / Curtains / Furniture
Mattresses / Soft Surfaces
Windows / Mirrors / Walls
All hard surfaces
Squeegee / Brush Insert
Squeegee Insert
Carpet / Curtains / Furniture
Mattresses / Soft Surfaces
NO ATTACHMENT
Squeegee / Brush Insert
Windows / Mirrors / Walls
All hard surfaces
Small Extraction Nozzle
Large Extraction Nozzle
14
___________________________________________________________
Your steam vacuum uses a separate reservoir tank to inject water into the steam as
it’s released from the extraction nozzle. Use the extraction function in combination
with the vacuum for deeper cleaning on soft and hard surfaces.
ØUse the extraction nozzle for cleaning furniture, curtains, mattress, windows, walls,
and floors
ØAfter cleaning, use the vacuum to remove excess water for faster drying.
32
Pos.(3)
Entkalkungsanleitung B
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functionality of the
appliance. Te connections on the extension pipes and the safety handle can be sprayed with a
suitable lubricant or silicone spray as required. This will make it easier to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the extension
pipes must be checked regularly for damage. The O-rings will last longer if they are coated regularly
with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Check the O-rings on the safety handle for damage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for damage:
Pos(3): 2 O-rings on the brass spout
Checking O-rings on the extension pipes
Check the O-rings on all extension pipes for damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Cleaning, care and maintenance of accessories
Pos.(1) Pos.(2)
Pos.(4) Pos.(5)
You can order a suitable set of O-rings from our online shop at
www.beam.de or by telephone on [phone].
Item no.: 96300
Pos.(3)
Entkalkungsanleitung B
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functionality of the
appliance. Te connections on the extension pipes and the safety handle can be sprayed with a
suitable lubricant or silicone spray as required. This will make it easier to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the extension
pipes must be checked regularly for damage. The O-rings will last longer if they are coated regularly
with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Check the O-rings on the safety handle for damage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for damage:
Pos(3): 2 O-rings on the brass spout
Checking O-rings on the extension pipes
Check the O-rings on all extension pipes for damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Cleaning, care and maintenance of accessories
Pos.(1) Pos.(2)
Pos.(4) Pos.(5)
You can order a suitable set of O-rings from our online shop at
www.beam.de or by telephone on [phone].
Item no.: 96300
Check the O-rings on the safety handle for da-
mage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for da-
mage:
Pos(3): 2 O-rings on the brass spout
Check the O-rings on all extension pipes for
damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functio-
nality of the appliance. Te connections on the extension pipes and the safety handle can
be sprayed with a suitable lubricant or silicone spray as required. This will make it easier
to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the
extension pipes must be checked regularly for damage. The O-rings will last longer if they
are coated regularly with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Checking O-rings on the extension pipes
Pos. (1) Pos. (2)
Pos. (3)
Pos. (4) Pos. (5)
Squeegee Insert
2 3
Extraction

Hose
(Part # SV7778)
Extension Wands –Sold Individually
(Part # SV1594) Floor Brush (# SV5672)
Floor Brush Adaptor (SV#1835)
Squeegee Insert (SV#1530
SET: SVFB-Large
Small Extraction Nozzle
(Part # SV7314) Large Extraction Nozzle
(Part # SV8011)
15
Long Jet Nozzle
(Part # SV5439)
Short Jet Nozzle
(Part # SV5439)
Vacuum Attachment
(Part # SV5645)
Brushes
1” Round Nylon
1” Round Brass
3” Round Nylon
3” Triangle Nylon
3” Round Brass
Squeegee / Brush Insert
(SV#8012)
Squeegee Insert
(SV#8015)
Squeegee Insert
(SV#7329)
Squeegee / Brush Insert
(SV7326)
32
Pos.(3)
Entkalkungsanleitung B
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functionality of the
appliance. Te connections on the extension pipes and the safety handle can be sprayed with a
suitable lubricant or silicone spray as required. This will make it easier to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the extension
pipes must be checked regularly for damage. The O-rings will last longer if they are coated regularly
with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Check the O-rings on the safety handle for damage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for damage:
Pos(3): 2 O-rings on the brass spout
Checking O-rings on the extension pipes
Check the O-rings on all extension pipes for damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Cleaning, care and maintenance of accessories
Pos.(1) Pos.(2)
Pos.(4) Pos.(5)
You can order a suitable set of O-rings from our online shop at
www.beam.de or by telephone on [phone].
Item no.: 96300
Pos.(3)
Entkalkungsanleitung B
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functionality of the
appliance. Te connections on the extension pipes and the safety handle can be sprayed with a
suitable lubricant or silicone spray as required. This will make it easier to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the extension
pipes must be checked regularly for damage. The O-rings will last longer if they are coated regularly
with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Check the O-rings on the safety handle for damage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for damage:
Pos(3): 2 O-rings on the brass spout
Checking O-rings on the extension pipes
Check the O-rings on all extension pipes for damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Cleaning, care and maintenance of accessories
Pos.(1) Pos.(2)
Pos.(4) Pos.(5)
You can order a suitable set of O-rings from our online shop at
www.beam.de or by telephone on [phone].
Item no.: 96300
Check the O-rings on the safety handle for da-
mage:
Pos.(1): 1 O-ring on the suction pipe
Pos.(2): 2 O-rings on the steam spout
Check the O-rings on the connector for da-
mage:
Pos(3): 2 O-rings on the brass spout
Check the O-rings on all extension pipes for
damage:
Pos.(4): 1: O-ring on the suction pipe
Pos.(5): 2 O-rings on the steam spout
Care of accessories
It is essential to clean accessory parts after use to maintain the performance and functio-
nality of the appliance. Te connections on the extension pipes and the safety handle can
be sprayed with a suitable lubricant or silicone spray as required. This will make it easier
to change accessory parts.
Checking the O-rings
To avoid damage to the appliance or accessories, the O-rings on the safety handle and the
extension pipes must be checked regularly for damage. The O-rings will last longer if they
are coated regularly with a lubricant/ silicone spray or a non-acidic grease.
Checking the O-rings
Checking O-rings on the extension pipes
Pos. (1) Pos. (2)
Pos. (3)
Pos. (4) Pos. (5)
2 3
Accessories (order at www.ussteam.net)

16
2 3
PROBLEM SOLUTION
The Blue Evolution powers ON
after plugging into the electrical
outlet and then turns OFF
This is normal:
ØPush the ON/OFF Button on the console to power ON the Blue
Evolution
Does not turn power up when the
ON button is pushed:
The Blue Evolution should be the ONLY appliance plugged into the
electrical outlet:
ØCheck the fuse box for tripped circuit breaker
ØExtension Cord must meet the following requirements:
v12 gauge / 15AMP minimum rating
v25 ft. max length
Alarm is activated
during warm-up
The Blue Evolution has pumped all the water from the reservoir tanks into
the boiler:
ØRefill the steam reservoir tank
ØPush the ON/OFF button on the console to restart the pump
Alarm is activated
during use
The Blue Evolution is out of water:
ØRefill tanks
ØPush the ON/OFF button to reset the Blue Evolution
No vacuum suction
alarm will activate
The collection tank is dirty or full of water:
ØEmpty and clean
ØRefill with water to the green fill line
No Vacuum Suction
No alarm
ØCheck hose for foreign objects or dirt
ØCollection tank lid is attached correctly and
vAttach the lid to the tank before installing
vLid must sit flush on the collection tank and in the locked into
position
ØCheck and replace the filter as needed
No steam when squeezing trigger
ØIs the temperature on the console ≥330 ℉?
ØCheck the hose connection
ØIs the trigger safety lock engaged?
No water is released
during extraction
Check the spray nozzle for mineral build up
ØDescale as needed to remove
Error Codes
01 –Refill steam tank
02 –Refill extraction tank
03 –Boiler did not refill
04 –Vacuum collection tank is full
05 -Descale boiler
06 –Replace UVC lamp
07 –Boiler overheated
08 -Replace anti-scaling filter
10 –Service Required
12 –Boiler too hot for de-scaling
Trouble Shooting

17
18 19

Hot water module descaling

18
1. Remove sound-proofing cover
20 21
1. Preparation
 
                  
                 
 
              
 
              
  
 
         
         
   

            
           
   
             
    
             

  
…             
             
       
Place a suitable container in front of the ap-
pliance and empty the reservoir by opening the
drain plug. Then reclose the drain plug.
Warning:
Up to 3 litres of water may come out if the ap-
pliance is lled to the max. level. The ll level is
indicated on the side of the appliance.
22 23
b)
STEAM VACUUM
PAUSE
WATER
Status:
MENU STANDBY
A B C
Mix 0.5 liters of descaler and 0.5 liters of
tap water in a dosing bottle.
Open the washing-extraction cap (P) and
pour the mixture.
Insert the steam-suction tube into the ap-
pliance.
Now, connect the appliance to the mains
and press icon (C) on the display.
The “WATER” icon will be activated.
Press the steam trigger on the handle and
pour the contents onto a basin.
Repeat the descaling procedure two to
three times if you notice any residual limes-
cale.
2. Descaling
a)
WARNING: Descaler residue can be harmful to health and damage surfaces. Wipe
up drops immediately. Read the information on the descaler packaging and follow the
safety instructions.
(P)
20 21
1. Preparation
Entkalkungsanleitung B
Use of the hot water module causes lime scale to form over time depending on the hardness of the
water used. To prevent a fault caused by lime scale in the steam hose we recommend that you
descale regularly.
Warning! Descalers can be harmful. Read the information on the descaler packaging and follow the
safety instructions.
Descalers or vinegar may cause damage to surfaces. Wipe up drops immediately. Only use suitable
and recommended descalers.
1. Preparation
Place a suitable container in front of the appliance and
empty the reservoir by opening the drain plug. Then re-
close the drain plug.
Warning:
Up to 3 litres of water may come out if the appliance is
filled to the max. level. The fill level is indicated on the
side of the appliance.
The appliance must be connected to the mains to descale the hot water module
Descaling instructions hot water module
The steam hose does not have to be descaled if you use decalcified water.
a)
Error, cause remedy
… no steam or hot water is produced when the steam lever is pressed.
Check whether the hose nozzle in the steam suction hose connector is dogged with
lime scale. If it is, proceed as follows:
Place a suitable container in front of the ap-
pliance and empty the reservoir by opening the
drain plug. Then reclose the drain plug.
Warning:
Up to 3 litres of water may come out if the ap-
pliance is lled to the max. level. The ll level is
indicated on the side of the appliance.
Descaling Solution is a mixture of 4 cups of vinegar and 4 cups of tap
water.
Descaling the Extraction / Hot Water Tank

19
22 23
3. Rinsing
Pour 0.5 litres of clear tap water into the reservoir “Hot
Water Extraction”. Hold the handle over a suitably sized
container to catch the mixture. Now press steam lever
(P) until all the water has rinsed through.
Repeat the procedure to rinse out any limescale and
vinegar residue.
Hot water module discaling
Your appliance is now ready for use again.
a)
3. Rinsing
Pour 1 liter of tap water into the tank washing
extraction. Connect the appliance to the mains
and press button (C) on the display.
The unit will turn on and the display will show
"COL".
Press the steam trigger on the handle.
and pour the contents on a basin.
Repeat the procedure to rinse any residual li-
mestone.
Your appliance is now ready for use again.
a)
Rinse the Tank with Tap Water
22 23
b)
STEAM VACUUM
PAUSE
WATER
Status:
MENU STANDBY
A B C
Mix 0.5 liters of descaler and 0.5 liters of
tap water in a dosing bottle.
Open the washing-extraction cap (P) and
pour the mixture.
Insert the steam-suction tube into the ap-
pliance.
Now, connect the appliance to the mains
and press icon (C) on the display.
The “WATER” icon will be activated.
Press the steam trigger on the handle and
pour the contents onto a basin.
Repeat the descaling procedure two to
three times if you notice any residual limes-
cale.
2. Descaling
a)
WARNING: Descaler residue can be harmful to health and damage surfaces. Wipe
up drops immediately. Read the information on the descaler packaging and follow the
safety instructions.
(P)

20
24 25

Boiler descaling