USER MANUAL
Box 79 Industrivägen 3 Tel. +46 (0)176-208920 Web www.vetek.com
76040 Väddö, Sverige Fax +46 (0)176-208929 Email info@vetek.com 8
7.1 Instruction for charging and connecting
If
prompt displays on the LCD, please charge the scale with exclusive adaptor.
Locate adaptor plug on the rear side of indicator.
The battery should be recharged at least every 3 months regardless if it is used or not. After a long period in storage, e.g. over 3 months, the battery should
run a full cycle (charge/discharge) to allow it to restore to full capacity.
7.2 DATE AND TIME SETTING
Keep the HOLD key pressed for 3 seconds to access TIME SETTING programming.
Example: to program 25 December 2008, 8:00 a.m.
Year programming: use the number keys to enter the correct value, press HOLD to access the next step once correctly
set.
Date programming: Use the number keys to enter the correct value, press HOLD to access the next step once correctly
set.
Time programming: Use the number keys to enter the correct value, press HOLD to confirm the entered date and time
once correctly set.
Display format: YYYY → MM.DD → HH:MM
7.3 HOLD FUNCTION
The Hold function is used to accurately determine the average weight, also with unstable value (small movements)
switch-on the scale using the [ON/OFF] key. The display shows “0.0 kg” and the stable weight and zero indications, after the self-test.
7.1a Rechargeable Batteries
1. Open the battery cover, and take the battery out.
2. Disconnect the rechargeable battery pack then replace it by a new one.
Put the battery back then arrange the connector in place well.
