Vision Fitness X20 User manual

STEP 2
HARDWARE INCLUDED
HARDWARE INCLUDED
X20 • X30
ELLIPTICAL TRAINER
Screwdriver
5mm
L-Shaped
Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
ASSEMBLY
GUIDE
X20 • X30
ELLIPTICAL™ TRAINER
toll free 800.335.4348
www.visionfitness.com
©2009 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480,
US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7
11.30.09
REV1.4
STEP 1
M8×55mm Round Hex Socket Bolt.
Quantity: 4
To avoid possible damage to this Elliptical Trainer, please follow assembly steps in the correct order. Before proceeding though, find your
new Elliptical Trainer’s two serial numbers located on the front axle tube, and on the back side of the console, and enter here:
Frame Serial Number: ____________________________________ Console Serial Number: ________________________________________
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Elliptical Trainer to prevent
loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially threaded in before
completely tightening any ONE bolt or screw.
M8×25mm Oval Hex
Socket Bolt. Quantity: 4
13/15mm Wrench
8.4×17.0×1.0t Arc
Washer. Quantity: 4
8.4×15.0×0.8t Tooth-Shaped
Washer. Quantity: 4
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
8.4×17.0×1.0t Flat
Washer. Quantity: 4
4×12mm Oval Cross
Tapping Screw. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
STEP 3
17×23×0.5t Wavy
Washer. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
8×20×1.5t Flat Washer.
Quantity: 2
8×15×2t Spring Washer.
Quantity: 2
M8×20mm Oval Hex
Socket Bolt. Quantity: 2
6mm
L-Shaped
Wrench
8mm
L-Shaped
Wrench
Cup Holder
(1, X20 only)
Water Bottle (1)
Top Cap (1)
Mast Boot (1)
Power Cord (1)
Front Stabilizer Tube (1)
Rear Stabilizer Cover (1)
Guide Rail Set (1)
Guide Rail Cover (1)
Pedal Arms (2)
Pedal Arm Covers (2 sets)
Console Mast (1)
Lower Handlebars (2)
Handlebar Caps (2)
Lower Link Arms With Footpads (2)
Side Pedal Covers (2)
Upper Handlebars (2)
Handlebar Boots (2)
Hardware Clamshell (1)
4×15mm Oval Cross
Tapping Bolt. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8×70mm Oval Hex Socket Bolt.
Quantity: 2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
8×15×2t Spring Washer.
Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8 Nylon Nut. Quantity: 2 16×28×1t Teflon Washer.
Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8×20mm Oval Hex Socket Bolt.
Quantity: 2
8×20×1.5t Flat Washer. Quantity:
4
STEP 5
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
20×27×1.5t Flat Washer.
Quantity: 2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
20×29×0.3t Wavy
Washer. Quantity: 2
STEP 6
M10x12mm Set Screw. Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer

STEP 2
HARDWARE INCLUDED
HARDWARE INCLUDED
X20 • X30
ELLIPTICAL TRAINER
Screwdriver
5mm
L-Shaped
Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
ASSEMBLY
GUIDE
X20 • X30
ELLIPTICAL™ TRAINER
toll free 800.335.4348
www.visionfitness.com
©2009 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480,
US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7
11.30.09
REV1.4
STEP 1
M8×55mm Round Hex Socket Bolt.
Quantity: 4
To avoid possible damage to this Elliptical Trainer, please follow assembly steps in the correct order. Before proceeding though, find your
new Elliptical Trainer’s two serial numbers located on the front axle tube, and on the back side of the console, and enter here:
Frame Serial Number: ____________________________________ Console Serial Number: ________________________________________
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Elliptical Trainer to prevent
loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially threaded in before
completely tightening any ONE bolt or screw.
M8×25mm Oval Hex
Socket Bolt. Quantity: 4
13/15mm Wrench
8.4×17.0×1.0t Arc
Washer. Quantity: 4
8.4×15.0×0.8t Tooth-Shaped
Washer. Quantity: 4
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
8.4×17.0×1.0t Flat
Washer. Quantity: 4
4×12mm Oval Cross
Tapping Screw. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
STEP 3
17×23×0.5t Wavy
Washer. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
8×20×1.5t Flat Washer.
Quantity: 2
8×15×2t Spring Washer.
Quantity: 2
M8×20mm Oval Hex
Socket Bolt. Quantity: 2
6mm
L-Shaped
Wrench
8mm
L-Shaped
Wrench
Cup Holder
(1, X20 only)
Water Bottle (1)
Top Cap (1)
Mast Boot (1)
Power Cord (1)
Front Stabilizer Tube (1)
Rear Stabilizer Cover (1)
Guide Rail Set (1)
Guide Rail Cover (1)
Pedal Arms (2)
Pedal Arm Covers (2 sets)
Console Mast (1)
Lower Handlebars (2)
Handlebar Caps (2)
Lower Link Arms With Footpads (2)
Side Pedal Covers (2)
Upper Handlebars (2)
Handlebar Boots (2)
Hardware Clamshell (1)
4×15mm Oval Cross
Tapping Bolt. Quantity: 2
QTY:4
QTY:4
Z02. 8.4×17.0×1.0t Arc Washer
Z01. M8×25mm Oval Hex Socket Bolt
QTY:4
QTY:4
QTY:4
Z03. M8×55mm Bolt Round Hex Socket Bolt
Z04. 8.4×17.0×1.0t Flat Washer
Z05. 8.4×15.0×0.8t Tooth-Shaped Washer
QTY:2
QTY:2
Z06. 4×12mm Oval Cross Tapping Screw
QTY:2
QTY:2
QTY:2
QTY:2
Z12. 8.2×15.4×2.0t Spring Washer
Z13. M8×20mm Bolt Oval Hex Socket Bolt
Z10. 17.2×22.5×0.3t Wave Washer
Z11. 8.2×20×1.5t Fat Washer
Z09. 4×0.7×15mm Oval Cross Bolt
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8×70mm Oval Hex Socket Bolt.
Quantity: 2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
8×15×2t Spring Washer.
Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8 Nylon Nut. Quantity: 2 16×28×1t Teflon Washer.
Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
M8×20mm Oval Hex Socket Bolt.
Quantity: 2
8×20×1.5t Flat Washer. Quantity:
4
STEP 5
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
20×27×1.5t Flat Washer.
Quantity: 2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer
20×29×0.3t Wavy
Washer. Quantity: 2
STEP 6
M10x12mm Set Screw. Quantity: 4
QTY:4
QTY:2
QTY:2
QTY:2
QTY:4
QTY:2
QTY:2
QTY:2
QTY:2
Z20. M8×70mm Oval Hex Socket Bolt
Z21. 8.2×15.4×2.0t Spring Washer
Z22. 8.4×17.0×1.0t Flat Washer
Z23. M8 Nylon Nut
Z24. 15.9×28.4×1.0t Teon Washer
Z25. M8×20mm Oval Hex Socket Bolt
Z26. 8.2×20.0×1.5t Flat Washer
Z32. 20.2×27.2×1.5t Flat Washer
Z33. 20.7×29.1×0.3t Wavy Washer

3
STEP
4
STEP
2
STEP
1
STEP OPEN HARDWARE FOR STEP 1
Attach Front Stabilzer Tube
• Attach the front stabilizer tube to the front
stabilizer bracket using 4 bolts and 4 arc
washers
6
STEP
2
STEP OPEN HARDWARE FOR STEP 2
Attach Rear Stabilizer Cover
• Place rear stabilizer cover over rear
stabilizer as shown
• Attach the rear stabilizer cover using 2 screws
Attach Guide Rail Set
• Align guide rail set with main frame as shown
• Attach the guide rail set to the main frame
using 4 bolts, 4 flat washers and 4 tooth
washers
• Attach the guide rail cover to the main
frame using 2 bolts
3
STEP OPEN HARDWARE FOR STEP 3
Attach Pedal Arms
• Slide wavy washer over crank followed
by pedal arm as shown. Rest pedal arm
wheel on guide rail
• Attach the pedal arm to the crank using
1 flat washer, 1 spring washer and 1
bolt
• Repeat on other side
Attach Console Mast
• Tie wire to data cable and feed the
connector through the console mast
• Make sure cable is not pinched between
the console mast and console mast plate
• Slide console mast over the 4 bolts in the
console mast bracket
• Tighten 4 bolts; be sure to fully tighten
Attach Pedal Arm Covers
• Make sure holes are on the bottom of the
pedal arm
• Attach the bottom cover first with 2 pre-
attached screws
• Snap on top cover
• Repeat on other side
7
STEP
4
Please follow the order and intent of these instructions
as much as you can. The order of assembly and order
of tightening the bolts will affect the performance of
your new exercise machine.
Front
Stabilizer Tube
Front Stabilizer
Bracket
1
STEP
Guide Rail Set
Main Frame Guide Rail Cover
Main Frame
Console Mast
Pedal Arm
Crank
Pedal Arm
Covers
Data Cable
Console Mast
Lower
Handlebar
Handlebar
Cap
Link Arm
Pedal Arm
Bracket
Lower
Handlebars
5
STEP
6
STEP
X20
6
STEP
X30
Upper
Handlebars
Handlebars
Boots
Top Cap
Lower
Handlebars
Mast BootCup Holder
CONSOLES
DELUXE
7
STEP
PREMIERSIMPLE
Console Cables
COMPLETE
X20
COMPLETE
X30
STEP
STEP
5
HARDWARE IS PRE-ATTACHED
Attach Lower Handlebars to Console Mast
• Remove pre-attached hardware
• Slide 1 large flat washer, 1 wavy
washer and another large flat washer
onto the console mast
• Slide lower handlebar onto console mast
and attach using 1 large flat washer, 1
handlebar cap, 1 flat washer, 1 spring
washer and 1 bolt
• Repeat on other side
OPEN HARDWARE FOR STEP 5
Attach Link Arms
• Slide wavy washer and 27mm flat
washer onto link arm before sliding link
arm onto pedal arm bracket
• Attach link arm to pedal arm using 1 flat
washer, 1 spring washer and 1 bolt
• Align opposite end of link arm with
bracket on bottom of lower handlebar
• Place Teflon washers on both sides of the
link arm. While holding Teflon washers
slide link arm into bottom end of lower
handlebar
• Secure the joint with 1 bolt, 1 flat
washer, 1 spring washer and secure
with one nut
• Repeat on other side
Attach Side Pedal Covers
• Secure side pedal covers with 2 pre-
attached screws on each side
OPEN HARDWARE FOR STEP 6
Attach Upper Handlebars
• Slide handlebar boot over bottom of
upper handlebar
• Slide upper handlebar onto lower
handlebar and align notch with tab
making sure handlebars are joined
together completely. Secure upper
handlebars to lower handlebars using
set screws
• Repeat on other side
Attach Top Cap
• Slide top cap over console mast and
snap into place.
• Insert console mast boot over top cap
and snap into place.
X20 only:
• Attach Cup holder using 2 pre-attached
screws
Side Pedal
Cover
HARDWARE IS PRE-ATTACHED
Attach Console
• With the screwdriver, remove the four
console mounting screws from the
backside of the console. Connect the
heart rate wires coming from the mast
to the heart rate wires coming from
the bottom of the console. Plug the
data cables into the board. Pull any
extra wire down into the console mast.
Secure console to the bracket using the
four console mounting screws removed
earlier. Tighten with the screwdriver.
• Plug the power cord into the power
socket in the front of the unit. Plug the
other end of the cord into the wall outlet.
Make sure the power switches at the
bottom of the unit and on the back of the
console are in the on position.
Rear Stabilizer
Cover