Vivo DESK-TOP3 User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: DESK-TOP3
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black 60” x 30” Concealed Cable Table Top
with Full-Size Pad
https://vivo-us.com/products/desk-top3

2 3
WARNING!
STEP 1
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
B (x1)
Middle Panel
A (x1)
Le Panel
C (x1)
Right Panel
S-A (x12)
ST4.2x16mm Screw
D (x4)
Support Bar
S-B (x6)
Wooden Dowel Pin
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
ASSEMBLY STEPS
STEP 2
E (x3)
Upper Tray
F (x2)
Lower Tray
G (x2)
Connecting Plate
H (x1)
Mouse Pad
S-C (x28)
M6x30mm Screw
S-D (x10)
M6x6mm Screw
S-E (x6)
ST4.2x20mm Screw
S-F (x8)
M6x8mm Screw
T-A (x1)
Phillips Screwdriver
Place Desktop Panels (A,B,C) upside down on a protective surface and insert Wooden Dowel Pins (S-B)
into Middle Panel (B). Connect Le Panel (A) and Right Panel (C) to Middle Panel (B) using Wooden
Dowel Pins (S-B).
Attach Support Bars (D) to Desktop Panels (A,B,C) using M6x30mm Screws (S-C) and Phillips
Screwdriver (T-A).
A
B
C
S-B
D
A
B
CS-C
T-A

4 5
STEP 3
STEP 4
STEP 5
STEP 6
Attach Upper Trays (E) to Desktop Panels (A,B,C) using M6x30mm Screws (S-C) and Phillips
Screwdriver (T-A).
Flip the desktop assembly and open Upper Trays (E). Fasten Upper Trays (E) to Desktop Panels (A,B,C)
using ST4.2x20mm Screws (S-E) and Phillips Screwdriver (T-A).
Fasten Upper Trays (E) to each other using Connecting Plates (G), M6x8mm Screws (S-F), and Phillips
Screwdriver (T-A).
Flip the desktop assembly and place desk frame upside down on the desktop assembly. Adjust frame
width to match desktop mounting holes, and secure frame to the desktop assembly using ST4.2x16mm
Screws (S-A) and Phillips Screwdriver (T-A). Use ST4.2x16mm Screws (S-A) and Phillips Screwdriver
(T-A) to install your desk frame control panel or crank handle.
NOTE: Holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.
A
B
C
S-C
T-A
E
A
B
C
E
T-A
S-E
E
G
S-F T-A
T-A
S-A

6 7
STEP 7 STEP 9
STEP 8
Install Lower Trays (F) to Upper Trays (E) using M6x6mm Screws (S-D) and Phillips Screwdriver (T-A).
Flip desk assembly right side up and place Mousepad (H) onto desktop.
The lower trays can be accessed by flipping open the upper trays. Conceal cables by keeping the upper
trays closed.
E
FS-D
T-A
H

LAST UPDATED: 05/03/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303