Vivo STAND-V002 User manual

Dual Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002
SKU: STAND-V002
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
B(x1)
Clamp
M-A (x8)
M4x12
Thumbscrew
M-C (x8)
D6 Spacer
S-B (x2)
M6 Security Nut
H (x1)
Pole Cap
I (x1)
Pole Cable Clip
S-A (x3)
M6x16 Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
T-B (x1)
5mm Allen
Wrench
T-A (x1)
3mm Allen
Wrench
C(x1)
Swivel Arm
D(x2)
VESA Plate
E (x1)
Grommet
Base Plate
F(x1)
So Pad
G (x1)
Support Plate
M-B (x8)
M4x30 Screw
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T-C (x1)
6mm Allen
Wrench
J (x4)
Arm Cable Clip

3
ASSEMBLY STEPS
STEP 1
Loosen knob on Clamp (B).
TOOLS NEEDED
22 lbs
Per Arm
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2 (Option A)
Desk Clamp Installation
Mount Clamp (B) to Pole (A) using M6x16 Screws (S-A) 3mm Allen Wrench (T-A). Secure assembly to
desktop by tightening knob on Clamp (B).
B
B
A
S-A
T-A

4
STEP 2 (Option B)
Grommet Installation
Using a phillips screwdriver, remove the screw from Clamp (B) and disassemble. Set Knob (B2) aside.
Mount Grommet Plate (E) to Pole (A) using M6x16 Screws (S-A) and 3mm Allen Wrench (T-A). Remove
adhesive backing from So Pad (F) and adhere to Grommet Plate (E). Using a 3/8” (10mm) drill bit,
drill through desktop surface and secure assembly using Knob (B2) and Support Plate (G).
B
B2
E
S-A
T-A
A
F
B2
G

5
Slide Pole Cable Clip (I) and Swivel Arm (C) onto Pole (A). Secure Swivel Arm (C) in place using 6mm
Allen Wrench (T-C). Attach Pole Cap (H) to Pole (A). Attach Arm Cable Clips (J) to Swivel Arm (C).
STEP 3
STEP 4
H
C
I
AT-C
J
Secure VESA Plates (D) to monitors using M4x12 Thumbscrews (M-A) or M4x30 Screws (M-B).
D6 Spacers (M-C) may be required.

6
STEP 5
STEP 6
Manage cables using Arm Cable Clips (J) and Pole Cable Clip (I).
J
I
Slide monitors with VESA Plates (D) onto Swivel Arm (C). Secure VESA Plates (D) in place using
M6 Security Nuts (S-B).
S-B
DC

7
STEP 7
Adjust the monitor tilt using 5mm Allen Wrench (T-B). To level monitors, remove M6 Security Nuts (S-B)
and tighten or loosen adjustment screws using 3mm Allen Wrench (T-A). Once level, fasten M6 Security
Nuts (S-B) back into place.
T-B
S-B
T-A

LAST UPDATED: 09/13/2021
REV1.1L
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oce hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oce hrs): < 15 M
www.vivo-us.
Chat live with an agent!
AVG. RESOLUTION TIME (within oce hrs): 5M 4S
309-278-5303