Vivo MOUNT VW01 User manual

1
T Wall Mount
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model MOUNT W01
Tool Required
phillips screwdriver
Package Content
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A
(x1)
B
(x1)
C
(x2)
D
(x2)
(x2)
F
(x1)
G
(x1)
H
(x1)
I
(x8)
J
(x8)
-W A
(x3)
-W B
(x3)
-W C
(x3)
-M A
M4x14 (x4)
-M B
M5x14 (x4)
-M C
M6x14 (x4)
-M D
M8x2 (x4)
-M
D5 (x4)
-M F
D8 (x4)
-M G
D5 (x8)

Aembl( Step
Step 1
Option A Wood Wall Mounting
Option B Concrete/Brick Wall Mounting
Use mount (A) to mark mounting holes on wall where stud is
located. Using a 3/16” bit, drill approximately 2.2” into marked
locations. Secure mount (A) to wall using bolts (W-A) and
washers (W-C).
Use mount (A) to mark mounting holes on wall. Using a 3/8” bit,
drill approximately 2.4” into marked locations. Secure mount (A)
to wall using anchors (W-B) bolts (W-A) and washers (W-C).
1 2
Step 2
Attach plastic cover to mount (A).
Step 3
Attach cable management clip (F) as shown in diagram.

Step 5
After placing TV on a flat surface, mount VESA plate (B) to back
using bolts (M-A, M-B, or M-C) and washers (M-E or M-F).
If bolts are too long, spacers (M-G) may be required.
3
Step 4
Mount VESA adapters (C) and (D) to VESA plate (B) using bolts
(J) and nuts (I) in the appropriate configuration to match your
televisions mounting holes.

4
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet( Warning
Contact u at
Last updated: 04.24.18
Attach TV to mount (A) using nuts (E) as shown in diagram.
Step 6
Step 7
Adjust mount (A)
using allen key (G)
and wrench (H).
Adjut a Deired