Vivo MOUNT-POLE4A User manual

Pole Mount TV Arm
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-pole4a
SKU: MOUNT-POLE4A
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
WARNING!
Phillips
Screwdriver
A (x1)
VESA Plate
with Arm
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-C (x8)
Bracket Bolt
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T-A (x1)
4mm Allen
Wrench
T-B (x1)
6mm Allen
Wrench
M-G (x4)
Large Spacer
M-E (x4)
M8 Washer
55lbs
(25kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
M-C (x4)
M6x30mm
Screw
M-D (x4)
M8x35mm
Screw
M-F (x4)
Small Spacer
TOOLS NEEDED
STEP 2
Attached the Mounting Bracket Arm (A2) around a compatible pole to Clamp (D) using 6mm Allen
Wrench (T-B), M8x55mm Bolts (S-A), and M8 Nuts (S-B) as shown below. Attach Cable Clips (E) to
Arm (A2).
NOTE: These are NOT the nuts that were removed in STEP 1.
B(x2)
Le Bracket
C(x2)
Right Bracket
D(x1)
Clamp
S-A (x2)
M8x55mm Bolt
S-B (x2)
M8 Nut
E (x1)
Cable Clip
A3
T-C
T-C (x1)
Wrench
A2
A2
A2
A2
A1
A1
Remove the Nuts (A3) that hold the Mounting Bracket Arm (A2) to the VESA Plate (A1) using Wrench
(T-C). Keep these aside for re-attaching the brackets. Remove VESA Plate (A1) from Mounting Bracket
Arm (A2).
S-B D
S-A T-B
E

4 5
STEP 5
A2
A3
Attach TV and VESA assembly to Mounting Bracket (A2) using Nuts (A3) removed in
STEP 1 and Wrench (T-C).
STEP 3
Follow steps below corresponding to your VESA pattern. Attach the Le & Right Brackets (B, C) to
VESA Plate (A) using a M6x8mm Screws (S-C) and a Phillips screwdriver.
VESA 300x300, 400x400
VESA 400x200
VESA 400x300
B
B
B
C
C
C
S-C
S-C
S-C
STEP 4
Use appropriate Screws (M-A thru M-D), M8 Washers (M-E), and Spacers (M-F, M-G) and secure VESA
bracket assembly to your screen using a Phillips screwdriver. .
T-C

6 7
STEP 6
Adjust as Desired
Use 4mm Allen Wrench (T-A) to loosen and tighten the tilt joint adjustment bolts as shown below.
T-A
THIS PAGE INTENTIONALLY LEFT BLANK

LAST UPDATED: 03/01/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303