Vivo STAND-TV00Y User manual

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00y
SKU: STAND-TV00Y
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
M-J (x4)
M8 Washer
M-A (x4)
M4x12mm Screw
M-I (x4)
M6 Washer
M-L (x4)
Medium Spacer
M-K (x4)
Small Spacer
M-M (x4)
Large Spacer
M-H (x4)
M4 Washer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A4 (x1)
Upper TV Bracket
M-B (x4)
M4x30mm Screw
A3 (x1)
Lower TV Bracket
A1 (x1)
Base Plate
B1 (x1)
Base Plate
M-C (x4)
M6x20mm Screw
M-D (x4)
M6x35mm Screw
M-E (x4)
M8x20mm Screw
T-A (x1)
4mm Allen Wrench
S-C (x4)
M6 Nut
S-B (x4)
M6 Cap Nut
S-A (x8)
M6x10mm Screw
B2 (x1)
Junction Plate
A2 (x1)
Junction Plate
B4 (x1)
Upper TV Bracket
B3 (x1)
Lower TV Bracket
M-F (x4)
M8x35mm Screw
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
T-B (x1)
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-G (x4)
M8x45mm Screw
C(x2)
So Pad

3
ASSEMBLY STEPS
STEP 1
Apply So Pads (C) to bottom of Base Plates
(A1, B1). Connect Base Plate (A1) to Junction
Plate (A2) using M6x10mm Screws (S-A) as
shown in diagram. Use 4mm Allen Wrench (T-A)
to tighten screws. Repeat this process with
Base Plate (B1) and Junction Plate (B2).
TOOLS NEEDED
110lbs
(49.90kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 3
Connect Lower TV bracket (A3) to Junction
Plate (A2) using M6x10mm Screws (S-A),
M6 Cap Nut (S-B). Tighten using 4mm Allen
Wrench (T-A) and Wrench (T-B). Repeat
process with Lower TV Bracket (B3) and
Junction Plate (B2).
STEP 2
Assemble Upper TV Bracket (A4) to TV bracket
(A3) using M6 Nut (S-C) and tighten using
Wrench (T-B). Repeat process with Upper TV
Brackets (B4) and Lower TV Bracket (B3).
STEP 4
With TV facing down on a clean, at surface,
mount leg assemblies to the back of the
monitor using Screws (M-A through M-G) and
washers (M-H through M-J) depending on size
of mounting holes in television. For curved
monitors, Spacers (M-K through M-M) may be
required.
H , I, G
(if necessary)
N to S
K to M
C
A1
S-A
T-A
B1
B2
A2
A1
A3
A4
S-C
T-B
B4
B3
A3
A2
S-A
S-B
T-A
T-B
B3
B2
M-A through M-G
M-H through M-J
M-K through M-M

LAST UPDATED: 07/25/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303