Vivo MOUNT-VWSF1 User manual

TV Wall Mount and Entertainment Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vwsf1
SKU: MOUNT-VWSF1,W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
PACKAGE CONTENTS
TOOLS NEEDED
66lbs
(30kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Mount
B(x2)
Plastic Cover
C(x1)
Cable Clip
W-A (x3)
ST6x55mm
Bolt
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x20mm
Screw
M-C (x4)
Spacer
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
W-C (x1)
M6 Washer
W-B (x3)
Anchor
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
D(x4)
VESA Adapter
S-A (x4)
M6x15
E (x1)
Shelf
F(x1)
Shelf
G(x2)
Shelf Clip
S-B (x2)
M5x8mm
Screw
H(x2)
Suction Cup
W-A2 (x3)
ST6x55mm
Bolt
W-C2 (x3)
M6 Washer
W-B2 (x3)
Anchor
S-C (x4)
M6 Nut
TV MOUNT ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Use Mount (A) to mark mounting holes on wall where stud is located. Using a 3/16” bit, drill
approximately 2.2” into marked locations. Screw two ST6x55mm Bolts (W-A) into top holes, making
sure to leave 3mm of threads exposed.
OPTION B: Concrete/Brick Wall
Use Mount (A) to mark mounting holes on wall. Using a 3/8” bit, drill approximately 2.4” into marked
locations. Insert Wall Anchors (W-B) and screw two ST6x55mm Bolts (W-A) into top holes, making sure
to leave 3mm of threads exposed.
AW- A
XX
3m m
W- A
W- B
3m m
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
22lbs
(10kg)
TV Mount
Shelf
A

4 5
STEP 2
Mount VESA Adapters (D) to
VESA Plate on Mount (A) using
M6x15mm Screws (S-A) and M6
Nuts (S-C) in the appropriate
configuration to match your
television mounting holes.
STEP 5
Insert Plastic Covers (B) as shown in diagram.
STEP 3
STEP 4
Slide Mount (A) over two Screws (W-A)
already inserted into wall and insert third
ST6x55mm Screw (W-A) and M6 Washer
(W-C) into bottom hole. Tighten using
Phillips screwdriver.
STEP 6
Attach Cable Clip (C) to bottom of Mount (A).
Aer placing TV on a flat surface, attach VESA plate to back using Screws (M-A, M-B). Make sure top of
mount is facing top of TV. If screws are too long, Spacers (M-C) may be required as shown in diagram.
STEP 7
Run cables through Cable Clip (C) and adjust
monitor to desired angle as shown in diagram.
SHELF ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Using the Shelf Bracket (E) as a guide, mark the mounting holes on the wall where a stud is located.
With a 4mm bit, drill approximately 2” into wall. Mount the Shelf Bracket (E) onto wall using ST6x55mm
Bolts (W-A2) and M6 Washers (W-C2). Ensure the mounting screws are anchored into the center of the
studs. The use of a stud finder is highly recommended.
F
E
D
400m m
300m m
300m m
400m m
400mm
200m m
D
E
F
W- C W- A
B
C
2 3
180°
+20°
-20°
1
A2
XX
W- A2
W- C2
S-A
S-A
S-C
S-C
E

6 7
STEP 1 (Continued)
OPTION B: Concrete/Brick Wall
Using Shelf Bracket (E) as a guide, mark mounting holes on wall. With a 5/16” bit, drill approximately
2.2” into wall. Insert Concrete Anchors (W-B2), ST6x55mm Bolts (W-A2) and M6 Washers (W-C2) to
mount the Shelf Bracket (E) onto wall as shown in diagram.
STEP 4
Slide Shelf (F) into Clips (G).
STEP 5
Use M5x8mm Screws (S-B) into Shelf Bracket (E) to secure the Shelf (F) into place using a Phillips
screwdriver as shown in the diagram.
Insert Shelf Clips (G) into Shelf Bracket (E).
STEP 2
Attach Suction Cups (H) to Shelf Bracket (E) as shown in diagram.
STEP 3
STEP 6
Place desired objects on shelf.
W-B2
W- A2
W- C2
C2
E2
B2
D2
D2
E
E
E
G
H
F
EF
G
S-B
S-B

LAST UPDATED: 03/01/2023
REV1
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303