Vivo STAND-V002T User manual

   
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
 (x2)  (x1)
 (x1)
 (x1)  (x1)
(x2) ! (x1) " (x5) # (x3)
-  (x8)
M5x12
-  (x8)
M4x12
- -$%&&'' ()&%& '
 (x2) * (x1)
4mm
 (x1)
6mm
 (x1)
3mm
- + (x8)
-  (x8)
M5x16
-   (x8)
D5
 (x2)
+ (x1)
, (x1)
-   (x8)
M4x16

)-. %
% /
Attach cap (F) to top of pole (E).
% 
Stick rubber pads (J) to the underside of clamp (C). Attach pole (D) to
clamp (C) using bolt (K). Tighten using 4mm allen key (O). Attach
clamp (C) to desktop.
*%  01 )%
2
%  23
*%  )) 
For grommet hole mounting, remove screw in top of bolt on clamp
(C). Stick rubber pads (J) to bottom of grommet base (I). Attach metal
plate (L) to bolt and run through grommet hole into grommet base (I)
and thread into pole (D) as shown in diagram.
% 4
Slide cable management clip (H) and bracket (B) onto pole (D) and
tighten using 6mm allen key (P).
10-7mm

3
% 5 23
% 6
5-
If bolts are too long, spacer (M-F) may be required.
Slide VESA plates (A) into brackets (B) and secure using thumb screws
(M) as shown in diagram.
% 7
Adjust tension in monitor
bracket with 6mm allen key (P).
% 8
% 5
Attach pole (E) to pole (D) using pole connector (G). Tighten grub
screws in pole connector using 3mm allen key (N). Slide cable
management clip (H) and bracket (B) onto pole (E) and tighten using
6mm allen key (P).
Attach VESA plates (A) to back of monitors using bolts (M-A, M-C) and
washers (M-E).
5
M-B
M-D

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
9. :
  
Last updated: 04/30/18
% ;
Run cables through cable management clips (H).
% <
Store allen keys (N,O,P) in cable
management clips (H) for future
adjustments.
=  
4