Vivo STAND-V001S User manual

INSTALLATION GUIDE
Item No.:STAND-V001S
Screen Size Range: 10"~27"
Max load capacity of each mounting bracket:
8Kg/17.6lbs
Integrated Cable management
-4-
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children!
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced.
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
Warning
( picture 2) ( picture 3)
Thank you for choosing our product
CABLE
A,B
DESK
CAUTION
Please read this guide before installation.
Ensure the correct installation. Keep away from high frequency or power equipment to
avoid disturbance.Choose desk to put this product.
We can not be responsible for any damage caused by wrong installation.
Email all question to: [email protected]

-3-
-2-
Hardware Kit:
67
NOTE:
AB
ID Description
1
4
B
5
10
3
6
A
1
1
4
1
1
1
Plastic cover
M4×12mm bolt
Qty
1
4
Tube Cover
M5X12mm bolt
Mounting Bracket
Knob
Fixed wreath
7
8
9
1
1
1Cable cover
Tube
2
Bottom support
Hand handle
1
M5x10mm sunk bolt
C1M4X10mm bolt
Select screws (A) or (B), depending on what thread thickness
is required for your monitor. Align the back of the monitor
with the monitor mounting bracket, and secure it to the
bracket using the selected screws, making sure not to
overtighten the screws (picture 3). Manage cables using the
cable management clip (9).
Step 3 - Attaching Monitor to Stand
Step 2
Choose where you would like to install the stand on your desk,
making sure there is enough space to clear the monitor and
stand, and tighten it using the hand bolt (2). It is
recommended the desk be between 15mm and 55mm thick,
and be strong enough to support the weight of your monitor
(picture 2).
- Fitting Stand to Desk
First, install the plastic cover (10), then slide the fixed ring
(6) onto the tube (8) and secure it using the installed
M5x10mm bolt (7). Once the ring has been tightened in the
desired position, slide the monitor mounting bracket (3) onto
the tube, and tighten it in position with the knob (4).
Next, place the tube cover (1) on top of the tube and secure it
with the M4x10mm bolt (C) using the provided wrench (D).
Step 1 - Assemble Stand
NOTE:
4
5
2
9
3
67
8
C
1D
4
C
1
D
4
D1Wrench
10