Vivo STAND-TV00M2 User manual

Bolt-Down TV Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00m2
SKU: STAND-TV00M2
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
110lbs
(49.90g)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
M-F (x4)
D8 Washer
M-G (x8)
Spacer
M-E (x4)
D5 Washer
M-A (x4)
M4x14
M-B (x4)
M5x14
M-C (x4)
M6x14
M-D (x4)
M8x20
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
A (x1)
Pole
B(x1)
VESA Plate
C(x4)
M6 Nut
D(x4)
M6x25
E(x4)
M6x30
F (x1)
Wrench
G(x1)
Allen Wrench
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
Drill
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
STEP 2
Position the pole on the desktop and drill small pilot holes. Secure M6x25 screws (D) or M6x30 screws
(E) and slide the base cover down.
Please note that the cable holes are positioned on the back side of the pole (A). Slide the base cover
up to reveal mounting holes on the base.

4
STEP 3
OPTION A: Flat Back Monitor
Position the VESA plate (B) on the back of the TV, making sure the long curved side is facing
up. Secure using screws (M-A, M-B, M-C or M-D) with washers (M-E or M-F).
OPTION B: Curved Back Monitor
Position the VESA plate (B) on the back of the TV, making sure the long curved side is facing
up. Secure using screws (M-D) with washers (M-F) and spacers (M-G).

5
STEP 4
Screw M6 nuts (C) onto top two screws of the VESA plate, leaving 4mm of thread exposed.
STEP 5
Hang TV with VESA plate (B) over slots in mounting head on pole.

6
STEP 6
Install M6 nuts (C) to lower two screws of the VESA plate, and tighten all nuts with the wrench (F).

7
STEP 7
Adjust swivel tension using the Allen wrench (G). Manage cables using cable holes in pole.

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303