Vivo STAND-TV22S User manual

T Floo Ca an Accessoies
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Moel STAN T22S
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
Tools Requie
phillips screwdriver
Package Conens
A (x1
Middl Bas
! (x1
Lf L
C (x1
Rih L
 (x1
Lf Covr
E (x1
Rih Covr
F (x1
Univrsal Pla
G (x2
Plasi Handl
H (x1
Lf Column
I (x1
Rih Column
J (x1
Lf Adapr
Brak
K (x1
Rih Adapr
Brak
L (x2
Top Covr
M (x1
DVD hlf
N (x1
Connin Pla
O (x1
Camra hlf
P (x1
uppor Bar
Q (x2
Knob
R (x2
M6x25
S (x4
M6x16
T (x3
M4x6
U (x2
M4x6
 (x2
M6x25
W (x6
M6x14
X (x8
M8x25
Y (x2
M6x25
A1 (x1
Wrnh
-M A (x4
M5x14
-M ! (x4
M6x14
-M C (x4
M6x30
-M E (x4
M8x50
-M F (x4
Washr
-M G (x8
mall par
-M H (x8
Bi par
Z (x1
Alln Ky
-M  (x4
M8x30
1
- -hps//vivo us.com/poucs/san v22s

Assembl; Seps
Sep 1 Assembling he !ase
Insert the base (A) into the left leg (B). Align the mounting holes
and secure with M6x16 bolts (S). Repeat this step for the right
leg (C).
Adjust caster height if needed by loosening the nut with the
wrench (A1).
2
Sep 2 Aaching he Column o he !ase
Loosen screws on each side of column (H, I)
using the Allen key (Z) to adjust height to
desired level, then tighten
Place the columns into the cutouts in the base. Slide handles
(G) over the inner columns and press firmly in place. NOTE:
Lock the casters in place to prevent movement during
assembly.
(CAUTION: Hold inner
column when
loosening for
adjustment). Ensure
both columns are at
the same height
using the height
indicators as guides.

Sep 3 Assembling he  Shelf/ Univesal Plae
Secure columns using M8x2 bolts (X) and attach plastic cover
(D,E) to the base. Tighten M6x2 safety bolts (R) into the back
of each column.
Attach the support plates on the universal plate (F) to the
columns with M6x14 bolts (W). Tighten bolts using a
screwdriver. Attach plastic covers (L) to the top of the
columns.
3
Attach the DVD shelf (M) to the support bar (P) with M6x14 bolts (W), M6x2
carriage bolts (Y) and knobs (Q). Adjust the shelf to the desired height before
installing the display to the stand.
Sep 3 Assembling he  Shelf (Coninue

Sep 4 Insalling he Aape !ackes
Fo Recesse !ack Sceens o o Access A/ Inpus
Note: Choose the appropriate bolts, washers and spacers (if necessary) according to
the type of screen. Do not over tighten the bolts. Screw the adapter brackets onto
the display.
Fo Fla !ack Sceens
4
Sep 5 Hanging he ispla; ono he Univesal Plae
Hang the adapter brackets (J, K) with display onto the universal
plate (F). Turn the bolts on the underside of the brackets
counter-clockwise to lock. Rotate the bolts clockwise to unlock.
A padlock (not included) can be used to prevent the display from
being stolen.
IMPORTANT: Make sure the display is correctly mounted before
releasing the display.

Sep 6 Cable Managemen
Run through cable management slots.
Sep 7 Insalling he Camea Shelf
5
Attach the camera shelf (O) to the connecting
plate (N) using M4x6 flat head bolts (T) on top
and M4x6 dome head bolts (U) in back.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safe; Waning
Conac us a
Last updated: /1/2018
Remove the bolts from the center of the universal plate (F).
Attach the connecting plate (N) to the universal plate at the
desired height using the previously removed bolts.
Sep 8 Insalling he Connecing Plae
6