Volkswagen VAS 6606/26 User manual

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
1
Operating manual
Adapter cable VAS 6606/26

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
2
Revision Date Reason
V00 10.03.2021 First edition
V01 17.03.2021 Complete revision
Legal notice
Legal notice
Manufacturer CAR-connect GmbH
Am Egelingsberg 8
38542 Leiferde, Germany
Phone: [phone]
Fax: [phone]
[e-mail]
www.car-connect.cc
Reproduction Reproduction or reprinting, whether in whole or in part, always requires the written permission
of the manufacturer.
Copyright TRANSLATION OF THE ORIGINAL OPERATING MANUAL
All rights reserved.
All text, images and graphics are subject to copyright and other intellectual property laws.
Copyright 2020 CAR-connect GmbH.
Image sources Symbols for warnings, prohibitions, mandatory actions and standards are taken from publicly
accessible sources, such as the Internet. CAD product images and product photos are provided
by the manufacturer. Images showing the product in use are provided with a reference to the
source.

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
3
Contents
Contents
LEGAL NOTICE 2
CONTENTS 3
INTRODUCTION 4
Preliminary information 4
Validity of the declaration of conformity 4
Manufacturer specifications 4
SAFETY 5
Warning levels 5
Important safety instructions 6
Intended use 7
Requirements for the target group 7
Duties of the operator 7
PRODUCT DESCRIPTION 8
Scope of delivery 8
Design 8
Symbols and connections 9
Wiring diagram 9
Technical data 10
OPERATION 11
Startup 12
Detaching the plug connections 13
Detaching the isolator box plug (66-pin) 13
Detaching the battery module plug 13
Cleaning 14
Disposal 14
Maintenance 14
HELP 15
Warranty 15
Customer service 15

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
4
EN | Introduction
Introduction
Preliminary information
Read through this operating manual carefully before using the product.
The product is delivered with a USB stick containing the operating manual in various
languages. You can find the current version and additional languages on our homepage.
The operating manual is an essential part of the product and must be kept together with the
product. If you sell or transfer ownership of the product, the operating manual must be
handed over to the new operator.
In addition to this operating manual, you must observe all relevant regulations for
diagnostics or troubleshooting of intrinsically safe high-voltage systems in road vehicles. This
includes but is not limited to: instructions for the vehicle manufacturer’s diagnostics
systems, company-specific safety requirements and the state of the art for working with
high-voltage systems.
Validity of the declaration of conformity
The declaration of conformity applies to the product described in the operating manual. Any
changes, modifications or extensions shall void the declaration of conformity and the risk
assessment.
Manufacturer specifications
CAR-connect GmbH
Since its founding, our company has focused on groundbreaking solutions for
electromobility. CAR
-
connect develops and produces custom solutions for the automotive
industry, repair shops and special vehicle
fleets.
Our core business is developing and producing innovative high
-
voltage charging technology
for electric vehicles. Our portfolio also includes measurement and diagnostic technology for
the entire vehicle and battery analysis equipment.
With extensive
experience in software and hardware development, CAR-
connect is your
dependable partner at every production stage, from prototyping to series production.
CAR-connect GmbH – Experience, Expertise and Innovation – MADE IN GERMANY

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
5
EN | Safety
Safety
This safety chapter provides information about the following:
•The warning levels contained in this operating manual
•Important safety instructions for the product
•Intended use of the product
•Requirements for the target group
This operating manual is only valid for the following product:
Item number
2210
2720
Designation
Adapter cable
VAS 6606/26
Warning levels
This chapter provides information about the warning levels used in this operating manual.
DANGER
Failure to observe the safety instructions WILL result in death or serious injury!
WARNING
Failure to observe with the safety instructions CAN result in death or serious injury!
CAUTION
Failure to observe the safety instructions CAN result in minor physical injury!

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
6
EN | Safety
Important safety instructions
This chapter contains the safety instructions that must be observed when handling the
product.
DANGER
Danger of fatal electric shock!
The electrical voltage in other systems is lethal and will cause death by electric shock!
•Do not use the product for measurements on utility power circuits!
•
Never attempt to power other devices with the product!
WARNING
Danger of fatal electric shock!
The electrical voltage in high-voltage systems is lethal and can cause death by electric
shock!
Liquids, condensation and high humidity can cause short circuits!
•Do not let the product come into contact with liquids!
•
Use the product only in dry and enclosed spaces!
WARNING
Danger of fatal electric shock!
The electrical voltage in the product is dangerous and can cause serious injury or death
from electric shock!
Defective and damaged products cannot guarantee protection against electrical voltage!
•Do not let the product come into contact with chemicals!
•Replace a defective or damaged product immediately!
•
Never attempt to repair or tamper with the product!

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
7
EN | Safety
Intended use
The product is used together with the VAS 6606 isolator box to test cell modules in MEB
traction batteries as part of the diagnostics prescribed by the vehicle manufacturer.
The product is suitable for the following diagnostics:
•Measuring the cell voltage
•Reading out the temperature sensors
The product is not used to test that the circuit is de-energized.
Use only the plug connections on the vehicle that the manufacturer has specified in the
guided fault finding.
In this operating manual, vehicle manufacturers are exclusively defined as vehicle
manufacturers in the Volkswagen Group.
Any use beyond what is listed here is prohibited.
Requirements for the target group
Only qualified personnel may work with this product!
In this operating manual, qualified personnel is defined as personnel meeting all
requirements for working on high-voltage systems applicable in the country of operation, as
defined by:
•Regulations applicable in the country of operation
•Qualification according to DGUV 200-005 level 2 or higher, or equivalent
•Specifications from the vehicle manufacturer and/or the operator.
At all times while using the product, staff must wear the personal protective equipment
prescribed by the vehicle manufacturer for work on high-voltage systems.
Duties of the operator
The operator is responsible for ensuring that all staff working with the adapter cable fulfills
the requirements for the target group.
Furthermore, the operator is responsible for ensuring the following:
•The adapter cable is always in perfect working order.
•The regular inspection intervals for the adapter cable are observed and recorded.

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
8
EN | Product description
Product description
Scope of delivery
Immediately check the condition of the product and the completeness of the delivery. If
anything is missing or defective, please contact the manufacturer immediately.
(1) Adapter cable
(2) USB stick with operating manual
Design
Product design:
(1) Plug for battery module
(2) Plug for isolator box

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
9
EN | Product description
Symbols and connections
The following symbols are shown on the product:
Symbol Meaning
Observe the operating manual!
The manufacturer part number is used in conjunction with the serial number to identify
the product.
The disposal instructions prohibit disposal of the product with household waste. Always
dispose of the product in accordance with all local disposal regulations.
The CE marking certifies that the product complies with all applicable European
regulations and has been subjected to the prescribed conformity assessment procedure.
The test seal identifies the product as having been approved for use in workshops and
production facilities belonging to the vehicle manufacturer.
Wiring diagram

32.VW.2210.2720_BA_V01_EN
VAS 6606/26
10
EN | Product description
Technical data
Rated data Values
Manufacturer number
22102720
Maximum rated voltage
Max. DC 60 V
Maximum rated current
1 A
Weight
~ 330 g
Total length
2000 mm
Ambient conditions Operation Storage Transportation
Temperature
5 °C to 40 °C
-20 °C to 60 °C
-20 °C to 60 °C
Elevation above sea level
Max. 2000 m
No limitation.
Humidity Max. 80 % up to 31° C,
decreasing linearly to
50 % at 40° C
Max. 85 %
Condensation not permitted. Maximum permissible relative humidity: 60 % in
environments with corrosive gas/air.