Volt VAL-2049-35-4-BBZ User manual

INSTALLATION INSTRUCTIONS
VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
VOLT®- Nano Integrated LED Brass Spotlight
ITEM: VAL-2049-35-4-BBZ
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT® Nano Integrated LED Brass Spotlight -VAL2049-35-4-BBZ
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or
more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located within
6 inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before reducing lamp.
2. Lamp gets HOT quickly!
3. Do not touch the hot lens, guard or cowl.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time.
6. Use a soft cloth.
7. Oil from skin may damage lamp.
8. Do not operate the xture with a damaged or missing lens or shield.
813.978.3700 • [email protected] • www.voltlighting.com
2

PACKAGE CONTENTS
PRODUCT DIMENSIONS
INSTALL FIXTURE BODY TO STAKE
1
813.978.3700 • [email protected] • www.voltlighting.com
3
A. (1) Fixture Body
B. (1) Allen Wrench
C. (1) Stake
2.39”
0.5”
0.45”
Pass the supply wire of the xture
body through the wireway slot on
the stake. Thread the xture body
onto the stake.
Fixture Body
Wireway Slot
Supply Wires
Stake

INSTALL STAKE INTO SOIL
2
Wire Connections
3
Pigtail
Main Supply Cable
Wire Connectors
813.978.3700 • [email protected] • www.voltlighting.com
4
Insert the stake into the soil until
ange of stake is ush to the
ground.
Ground
Soil
Fixture Body
Supply Wires
Stake
Strip both the leads from the
luminaire pigtail. Using two UL
listed wire connectors (sold
separately), connect the leads
from the luminaire to the main
supply cable leads.
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
VOLT® Nano Integrated LED Brass Spotlight -VAL2049-35-4-BBZ

Adjust Directions
4
Fixture Body
Screw
813.978.3700 • [email protected] • www.voltlighting.com
5
By using the Allen wrench,
loosen the screw at the joint
and adjust the luminaire to the
desired direction. Once the
desired direction is achieved,
tighten the screw.
ROTATE
Allen Wrench

Specications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • www.voltlighting.com
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)