Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to
minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before
starting installation.
Certain steps in the instructions are only presented in the form of
images. Explanatory text is also given for more complicated
steps.
In the event of any problems with the instructions or the
accessory, contact your local Volvo dealer.
When installing, the car must retain a temperature of 20 degrees
C.
After installation, the car must not be washed for 48 hours
After installation, the car must not be driven for 2 hours
There may be parts in the accessories kit that are not needed for
this installation.
1. Used for focused component, the component with which
you will do something.
2. Used as extra colors when you need to show or
differentiate additional parts.
3. Used for attachments that are to be removed/installed. May
be screws, clips, connectors, etc.
4. Used when the component is not fully removed from the
vehicle but only hung to the side.
5. Used for standard tools and special tools.
Note!
This colour chart displays (in colour print and electronic
version) the importance of the different colours used in the
images of the method steps.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
Parking assistance, pilot
-
31414664
-
V1.1
Page 6 / 95
