Waters 2489 User manual

Quick Install Guide
Waters®2489 UV/Visible Detector
Serial Number:
Date Installed:
Installed By:

715001456, Rev. A 2 of 4
Connecting your detector
For detailed installation information and cautionary statements regarding this product, refer to the
2489 UV/Visible Detector Operator’s Guide.
Electrical Connections
A. Connect any required event or signal cables.
B. If necessary, connect an Ethernet cable from the
detector to the system LAN switch or to the
network card on the acquisition computer.
C. Connect the power cable to a grounded receptacle.
Analog 1 +
Analog 1 –
Ground
Analog 2 +
Analog 2 –
Switch 1
Switch 1
Ground
Switch 2
Switch 2
1
2
3
4
5
6
7
8
9
10
Inject Start +
Inject Start –
Ground
Lamp On/Off +
Lamp On/Off –
Chart Mark +
Chart Mark –
Ground
Auto Zero +
Auto Zero –
III
Fuse: 3.15A / 250V
C
A
B
Ethernet Cable
110/220 V

715001456, Rev. A 3 of 4
Fluidic Connections
Power Up
Inlet Tubing (labeled)
A
Outlet Tubing
B
A. Connect the inlet tubing of the detector flow cell to the outlet of a column or
upstream detector using a PEEK compression screw and ferrule.
B. Connect the outlet tubing of the detector flow cell to a waste container or inlet
of a downstream detector using a PEEK compression screw and ferrule.
A. Power up the 2489 detector. After the startup diagnostics have run successfully
and a five-minute warmup finishes, the detector displays:

715001456, Rev. A 4 of 4
The quality management system of
Waters' chromatography applications
software design and manufacturing
facility, Milford, Massachusetts, complies
with the International Standard ISO
9001 Quality Management and Quality
Assurance Standards. Waters' quality
management system is periodically
audited by the registering body to ensure
compliance.
Waters Corporation
34 Maple Street
Milford, MA 01757
508 478-2000
http://www.waters.com
Waters is a registered trademark of Waters Corporation
Printed in U.S.A. March, 2007
715001456, Rev. A
If you have any questions regarding this installation, call your local Waters office. In the U.S. call 1-800-252-HPLC.