Weider Platinum XP600 User manual

Model No. 831.153992
Serial No.
Write the seriaUnumber in the
space above for future reference,
Serial Number Decal (under seat)
• Assembly
• Adjustments
• Part List and Drawing
_CAUTmON
Read all precautions and instruc_
tions in this manuaJ before
using this equipment. Save this
manual for future reference.
®
RESISTANCE SYSTEM EXERCISER
User's Manual
Sears, Roebuck and Co., Roffman Estates, IL 60179

TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 3
HMPORTANT PRECAUTHONS ................................................................ 4
BEFORE YOU BEGIN ...................................................................... 5
ASSEMBLY ............................................................................... 6
UPPER CABLE ADJUSTMENT .............................................................. 14
ADJUSTMENTS .......................................................................... 15
CABLE DHAGRAM ......................................................................... 18
TROUBLESHOOTHNG ..................................................................... 19
EXERCISE GUiDELiNES .................................................................. 20
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL ONE-YEAR WARRANTY ...................................................... Back Cover
Note: A PART iDENTiFiCATiON CHART and a PART LiST/EXPLODED DRAVVHNGare attached in the center of
this manual, Remove the PART iDENTiFiCATiON CHART and PART LiST/EXPLODED DRAWING before begin-
ning assembly,

WARNING DECAL PLACEMENT
:eep hands and
ngers clear of
_s area.
Misuse of this product may resuHtin serious injury.
Read user's manuaNand foNHowaNmwarnings
and operating instructions prior to use.
Do not allow children on or around machine.
• RepHacemabemif damaged, iRHegibHe,or removed.
3

iMPORTANT PRECAUTIONS
AWARN! NG: Toreducethedskofseriousinju_y_readthefo,ow_ngimportantprecautions
before using the resistance system.
1. Read all instructions in this manual before
using the resistance system. Use the resist-
ance system only as described in this manual.
2. it is the responsibility of the owner to ensure
that all users of the resistance system are
adequateJy informed of aJl precautions.
3. The resistance system is intended for home
use only. Do not use the resistance system in
any commercial, rental, or institutional setting.
on the high cables only while sitting on the
bench, with the seat in one of the three posi-
tions closest to the upright base, or while
standing on the base pJate.
11. The crossbar on the top frame is not
desig ned to be used for puHoup exercises.
Do not hang on the crossbar.
12. The resistance system is designed to be
used with the included resistance. Do not
use the resistance system with any other
4. Use the resistance system only on a level type of resistance.
surface. Cover the fJoor beneath the resist-
ance system to protect the ricer, t 3. AJways disconnect the lat bar from the high
cables when performing an exercise that
5. Make sure that aH parts are properly tight- does not require it.
ened each time the resistance system is
used. Replace any worn parts immediately. 14. Make su re the storage knob is in place and
fuity tightened each time the resistance sys-
tem is used.
6. Keep children under 12 and pets away from
the resistance system at aH times.
7. Keep hands and feet away from moving parts.
8. Always wear athletic shoes for foot protec-
tion while exercising.
15. Make sure that the cables remain on the pul-
leys at all times, if the cables bind as you are
exercising, stop immediateJy and make sure
that the cables are on the pulleys.
16. Do not pull on the cabJes while the resist-
9. The resistance system is designed to sup- ance level is being adiusted.
port a maximum user weight of 300 pounds. 17. if you feel pain or dizziness while exercising,
10. Pull on the lower cable only whiJe sitting on stop immediateJy and begin cooling down.
the bench or standing on the base plate. Pull
_]_WARNING: Beforebeginningthisoranyexerciseprogram,eonsu,yo_,rphysician.This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read aH instructions before using. Sears assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
4

BEFORE YOU BFGmN
Thank you for selecting the innovative WELDER®
PLATINUM XP600 resistance system, The resistance
system offers a selection of stations designed to devel-
op every major muscle group of the body, Whether your
goal is to tone your body, build dramatic muscle size
and strength, or improve your cardiovascular system,
the resistance system will help you to achieve the spe°
cific results you want,
For your benefit, read this manuaJ carefully before
using the resistance system, if you have questions
after reading this manual, call 1-800-4-MYoHOME ®
(1°800°469°4663), To help us assist you, please note
the product model number and serial number before
calling, The model number is 831,153992, The serial
number can be found on a decal attached to the resist°
ance system (see the front cover of this manual),
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled,
ASSEMBLED
DiMENSiONS:
Height: 82 in,
Width: 66 in,
Depth: 80 in,
Crossbar
High Pulley
Console
Upright
Lat Bar
Bar
Storage Knob
Backrest
Foot Hate
Low Pulley
Seat
Leg Lever
Base Hate
Seat Knob