Wells MOD-227TDM User manual

MOD-227TDM, MOD-327TDM, MOD-427TDM,
MOD-527TDM BUILT-IN MODULAR WARMERS
MOD-227TDM - MOD-527TDM BUILT-IN MODULAR WARMERS
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• Each 12” x 27” well accommodates four
1/3-size pans up to 6” deep.
• Individual thermostatic temperature
control for each well gives these warmers
maximum versatility. A signal light indicates
that the heating element is energized.
• A one-inch diameter drain manifold (DM)
is provided with each warmer to allow for
a single drain connection at the left or right
front corner.
• The MOD series warmers are designed for
wet or dry operation.
• Fully insulated for greater efficiency.
• Each well is one-piece, deep-drawn,
stainless steel construction for maximum
strength and durability.
• Wellslok allows for quick and easy
installation in stainless steel countertops.
• The MOD 12”x 27” warmers are
Underwriters Laboratories, Inc.
LISTED and meet NSF International
and Canadian standards.
• A one-year warranty against defects
covers parts and labor.
The Wells 12” x 27” Built-in Modular Warmers easily meet your volume needs, designed
with 33% more capacity than the standard modular warmers. Each heavily insulated well is
individually controlled, providing flexibility and convenience.
MOD-427TDM
WELLS
Accessories / Options
Wellslok Extension Kit, designed for
installation in a variety of countertops
up to 1-1/2” thick, refer to installation
instructions, 22593
Drain Screen, 21709
Optional 72” Wiring, thermostatically
controlled warmers, priced per well
(standard length is 24”)
Specifications
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
MOD-227TDM:
Installed 49 22
Shipping 59 27
MOD-327TDM:
Installed 71 32
Shipping 85 39
MOD-427TDM:
Installed 94 43
Shipping 101 46
MOD-527TDM:
Installed 101 46
Shipping 122 55

MODEL
MOD-227TDM, MOD-327TDM
B U I LT- I N M O D U L A R WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
03/02 • REV(A) • PART NO. 300711
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The Drain Manifold with Valve (1 inch FPT) is supplied.
RR
R
M O D - 2 2 7 T D M , M O D - 3 2 7 T D M E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS PER LINE 3 PHASE AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3
MOD-227TDM 208 2480 - - - 11.9 NONE
MOD-227TDM 240 3300 - - - 13.8 NONE
MOD-327TDM 208 3720 10.3 10.3 10.3 17.9 NONE
MOD-327TDM 240 4950 11.9 11.9 11.9 20.6 NONE
MINIMUM CLEARANCE REQUIRED FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 1 6 3/4 4 1/8
(25) (25) (171) (105)
(159)
6 1/4
(248)
9 3/4
(44)
1 3/4
(197)
7 3/4
(749)
29 1/2
(57)
2 1/4
(776)
30 9/16
(356)
14
(356)
14
CONNECTION
3/4" CONDUIT
OF MANIFOLD
EACH END
1'' FPT
(44)
1 3/4
(159)
6 1/4
(248)
9 3/4
(197)
7 3/4
(356)
14
(457)
18
(776)
30 9/16
(57)
2 1/4
(1105)
43 1/2
OF MANIFOLD
EACH END
1'' FPT
CONNECTION
1'' CONDUIT
MODEL MOD-227TDM
MODEL MOD-327TDM

MODEL
M O D - 4 2 7 T D M
B U I LT- I N M O D U L A R WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
03/02 • REV(A) • PART NO. 300711
MINIMUM CLEARANCE REQUIRED FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 1 6 3/4 6
(25) (25) (171) (152)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The Drain Manifold with Valve (1 inch FPT) is supplied.
M O D - 4 2 7 T D M E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS PER LINE 3 PHASE AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3
MOD-427TDM 208 4960 14.5 14.5 9.8 23.8 NONE
MOD-427TDM 240 6600 17.8 17.8 11.3 27.5 NONE
RR
R
(159)
6 1/4
(248)
9 3/4
(44)
1 3/4
(197)
7 3/4
(356)
14
(889)
35
(776)
30 9/16
(57)
2 1/4
(1461)
57 1/2
OF MANIFOLD
EACH END
1'' FPT
CONNECTION
1'' CONDUIT

MODEL
M O D - 5 2 7 T D M
B U I LT- I N M O D U L A R WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone]
www.wellsbloomfield.com
© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.
03/02 • REV(A) • PART NO. 300711
M O D - 5 2 7 T D M E L E C T R I C A L S P E C I F I C AT I O N S :
(159)
6 1/4 (248)
9 3/4
(44)
1 3/4
(197)
7 3/4
(889)
35
(356)
14
(776)
30 9/16
(57)
2 1/4
(1816)
71 1/2
MANIFOLD
EACH END OF
1'' FPT
CONNECTION
1'' CONDUIT
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The Drain Manifold with Valve (1 inch FPT) is supplied.
MODELS VOLTS WATTS AMPS PER LINE 3 PHASE AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3
MOD-527TDM 208 6200 19.5 14.6 14.6 29.8 NONE
MOD-527TDM 240 8250 22.1 16.9 16.9 34.4 NONE
MINIMUM CLEARANCE REQUIRED FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 1 6 3/4 6
(25) (25) (171) (152)
R
R R