Wells SS-206 User manual

WELLS
R A I S I N G T H E S T A N D A R D
Specifications
Overall Dimensions: Inches MM
Width 13 11/16 348
Depth 21 3/4 552
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 19 9
Shipping 21 10
SS-206 BUILT IN FOOD WARMER
SS-206 BUILT-IN FOOD WARMER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• 12” x 20” standard warming pan easily
adapts to a variety of fractional or round inset
pans up to 6” deep.
• The tubular element, located under the
warming pan, allows for quick heating.
• Warmer has a high-limit thermostat, which
prevents unit from overheating.
• Infinite control is housed in a remote,
oval panel with a guard ring to help prevent
accidental temperature changes.
• Warming pan is deep-drawn, stainless steel
for maximum strength and durability.
• Models are available with optional drain (D).
• Wellslok allows for quick and easy installation
in stainless steel countertops.
• Warmer is designed for wet or dry operation.
• The SS-206 Warmer is Underwriters
Laboratories, Inc. Recognized and meets NSF
International standards.
• A one-year warranty against defects
covers parts and labor.
Wells SS-206 Built-In Rectangular Food Warmer
is designed for top mount installation. The warming
pan is heavy-duty stainless steel and is available
with or without a drain. The well accommodates a
standard 12” x 20” inset pan up to six inches deep.
SS-206
Accessories / Options
Adapter Top, to convert SS-206 to hold
two 7-quart insets, 20176
Adapter Top, to convert SS-206 to hold
two 4-quart insets and two 2 1/2-quart
insets, 20434
Adapter Top, to convert SS-206 to hold
one 7-quart and one 11-quart inset, 21621
Adapter Top, to convert SS-206 to hold
three 4-quart insets, 21615
Adapter Top, to convert SS-206 to hold four
2 1/2-quart insets, 21624
Adapter Top, to convert SS-206 to hold
one 4-quart and one 7-quart inset, 21617
Inset, 2 1/2-quart capacity with lid, 20773
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Inset, 11-quart capacity with lid, 20908
Individual drain (D) models available
Drain Valve Extension Kit, extension from
drain to counter front with remote handle,
for use with “D” models only, 20385

WELLS
R
STD.4
R
(348)
13 11/16
305
12
(508)
20
(552)
21 3/4
(125)
4 15/16
(219)
8 5/8
SS-206D ONLY
1/2 IN DRAIN NPT
POWER SUPPLY LEADS
S S - 2 0 6 E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTUR ING • PRINTED IN THE U.S.A. • 2/01 • REV(F) • PART NO. 37123
MODEL
SS-206
B U I LT - I N R E C TA N G U L A R
F O O D WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
SUGGESTED CLEARANCE FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT*
2 2 6 3/4 4 1/8
(51) (51) (171) (105)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The installation of recognized component units requires additional
evaluations to Underwriters Laboratories, Inc. standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.
* When control box is located below the unit,
front clearance can be 2 inches.
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
SS-206 120 1200 10.0 SINGLE NONE
SS-206 208 900 4.3 SINGLE NONE
SS-206 240 1200 5.0 SINGLE NONE
All models with an 'D' suffix have the same electrical specifications as the standard models.