WIKA TF35 User manual
ES
FR
DE
EN
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
Threaded thermometer with plug connection, model TF35
Einschraubthermometer mit Steckeranschluss, Typ TF35
Capteur à visser avec connexion enfichable, type TF35
Termómetro para roscar con conector, modelo TF35
Fig. 1: AMP Junior Power Timer connector
Fig. 2: Circular connector M12 x 1
Fig. 3: Deutsch instrument connector DT04-2P
Fig. 4: Rectangular connector EN 175301-803
11442042.05 04/2020 EN/DE/FR/ES
ES
FR
DE
EN
2WIKA operating instructions model TF35
Operating instructions model TF35
Page 3 - 18
Betriebsanleitung Typ TF35
Seite 19 - 34
Mode d'emploi type TF35
Page 35 - 50
Manual de instrucciones modelo TF35
Página 51 - 65
© 01/2009 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
11442042.05 04/2020 EN/DE/FR/ES
3
EN
WIKA operating instructions model TF35
Contents
Contents
1. General information 4
2. Design and function 5
3. Safety 7
4. Transport, packaging and storage 10
5. Commissioning, operation 11
6. Maintenance and cleaning 13
7. Dismounting, return and disposal 14
8. Specifications 16
11442042.05 04/2020 EN/DE/FR/ES
4
EN
WIKA operating instructions model TF35
1. General information
■
The threaded thermometer described in the operating instructions has been
designed and manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the
instrument. Working safely requires that all safety instructions and work instructions
are observed.
■
Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TE 67.10
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
1. General information
11442042.05 04/2020 EN/DE/FR/ES
5
EN
WIKA operating instructions model TF35
2. Design and function
2.1 Overview
Electrical connection
Process connection
Thermowell
2.2 Description
The model TF35 threaded thermometer is used for temperature measurement of liquid
and gaseous media.The temperature range depends on the measuring element.
The integrated thermowell with threaded connection enables direct installation into the
process. Depending on the requirements, the thermowell can be selected from brass
or stainless steel. By default, the TF35 thermometer can be used for pressures up to
50 bar [725 psi].
The directly mounted coupler connector ensures simple commissioning of the
thermometer.
All electrical components are protected against splash water.The electrical connection
is made via the connector.
The threaded thermometer model TF35 has a high resistance to shock and vibration.
2. Design and function
11442042.05 04/2020 EN/DE/FR/ES
6
EN
WIKA operating instructions model TF35
2. Design and function
2.3 Dimensions in mm
AMP Junior Power Timer
connector
FASTON blade terminal
6.3 x 0.8 mm
Circular connector M12 x 1
Deutsch instrument connector
DT04-2P
Circular connector M12 x 1
with neck tube 45 mm
Rectangular connector
EN 175301-803, form A
Bayonet connector,
DIN 72585
11398711.02
11507128.02
11507101.02
11507498.02
11488086.03
14073420.02
11578549.01
11442042.05 04/2020 EN/DE/FR/ES
7
EN
WIKA operating instructions model TF35
2.4 Scope of delivery
Cross-check scope of delivery with delivery note.
3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to property or the environment, if not avoided.
DANGER!
... identifies hazards caused by electric power. Should the safety
instructions not be observed, there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result in burns,
caused by hot surfaces or liquids, if not avoided.
Information
... points out useful tips, recommendations and information for efficient
and trouble-free operation.
3.2 Intended use
The threaded thermometer model TF35 is used for temperature measurement in a wide
range of industrial applications. It is not intended to provide any safety or protective
functionality.
The instruments are not approved for use in hazardous areas!
The threaded thermometer has been designed and built solely for the intended use
described here, and may only be used accordingly.
2. Design and function / 3. Safety
11442042.05 04/2020 EN/DE/FR/ES
8
EN
WIKA operating instructions model TF35
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the threaded thermometer outside of its technical
specifications requires the instrument to be taken out of service immediately and inspected
by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and
injuries.
▶
Refrain from unauthorised modifications to the instrument.
▶
Do not use the instrument within hazardous areas.
▶
Do not use the instrument with abrasive or viscous media.
Any use beyond or different to the intended use is considered as improper use.
Do not use this instrument in safety or emergency stop devices.
3.4 Responsibility of the operator
The instrument is used in the industrial sector.The operator is therefore responsible for
legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
■
that suitable first-aid equipment is available and aid is provided whenever required.
■
that the operating personnel are regularly instructed in all topics regarding work
safety, first aid and environmental protection and know the operating instructions
and, in particular, the safety instructions contained therein.
■
that the instrument is suitable for the particular application in accordance with its
intended use.
■
that personal protective equipment is available.
3. Safety
11442042.05 04/2020 EN/DE/FR/ES
9
EN
WIKA operating instructions model TF35
3.5 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to property.
▶
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
▶
Keep unqualified personnel away from hazardous areas.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel
who, based on their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
3.6 Labelling, safety marks
Product label (example)
Model
Measuring element
Number of production order
Approval logos
Before mounting and commissioning the instrument, ensure you read the
operating instructions!
TFS135 NC 60 °C 12345678
3. Safety
11442042.05 04/2020 EN/DE/FR/ES
10
EN
WIKA operating instructions model TF35
4. Transport, packaging and storage
4.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during
internal transport, proceed carefully and observe the symbols on the
packaging.
▶
With internal transport, observe the instructions in chapter 4.2
“Packaging and storage”.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair).
Permissible conditions at the place of storage:
■
Storage temperature: -40 ... +85 °C
■
Humidity: 35 ... 85 % relative humidity (no condensation)
Avoidance of exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
Store the threaded thermometer in its original packaging in a location that fulfils the
conditions listed above. If the original packaging is not available, pack and store the
thermometer as described below:
1.
Wrap the instrument
in an antistatic plastic film.
2.
P
lace the instrument
, along with the shock-absorbent material, in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag containing a
desiccant inside the packaging.
4. Transport, packaging and storage
11442042.05 04/2020 EN/DE/FR/ES
11
EN
WIKA operating instructions model TF35
5. Commissioning, operation
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
CAUTION!
Damage to the instrument
When working on open electric circuits (printed circuit boards) there is a
risk of damaging sensitive electronic components through electrostatic
discharge.
▶
The correct use of grounded working surfaces and personal armbands
is required.
5.1 Mounting
Assembly of the threaded thermometer has to be performed in such a way that the
permissible operating temperature (environment, medium) is neither exceeded nor
undercut considering convection and thermal radiation.
The installation site must be protected from weather influences and permanent UV
exposure/sun radiation.
Depending on the type of application, the electrical connection must be protected from
mechanical damage.
5. Commissioning, operation
11442042.05 04/2020 EN/DE/FR/ES
12
EN
WIKA operating instructions model TF35
5.2 Electrical connection
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
The instrument may only be installed and mounted by skilled
personnel.
▶
Operation using a defective power supply unit (e.g. short-circuit from
the mains voltage to the output voltage) can result in life-threatening
voltages at the instrument!
▶
Only connect with the voltage disconnected!
▶
Only disconnect the mating connector with the voltage disconnected.
▶
Use suitable mating connectors for the current and voltage ranges.
■
Fine-stranded leads must be finished with end splices.
■
Cables used must comply with the respective requirements in terms of stability and
temperature.
■
Connection cables must be run so that any mechanical damage is prevented.
■
Only connect circuits with the same voltage and type of protection to the switch
contacts and connection leads of the instrument.
■
Size the connection leads for the largest current in the circuits.
■
Only connect the TF35 with extra-low voltage circuits, or with safety extra-low voltage
circuits (SELV) or protected extra-low voltage circuits (PELV).
■
Do not connect circuits simultaneously with low-voltage circuits.
Pin assignment
Deutsch instrument connector DT04-2P
AMP Junior Power Timer connector FASTON blade terminal
Bayonet connector per DIN 72585
5. Commissioning, operation
11442042.05 04/2020 EN/DE/FR/ES
13
EN
WIKA operating instructions model TF35
5. Commissioning, operation / 6. Maintenance and cleaning
Circular connector M12 x 1
Rectangular connector per DIN EN 175301-803
2-wire 3-wire 4-wire
2-wire 3-wire 4-wire
6. Maintenance and cleaning
For contact details see chapter 1 “General information” or the back page
of the operating instructions.
6.1 Maintenance
The threaded thermometer is maintenance-free.
Repairs should only be carried out by the manufacturer or, following prior consultation,
by correspondingly qualified skilled personnel.
6.2 Cleaning
CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Residual media in the dismounted instrument can
result in a risk to persons, the environment and equipment.
▶
Carry out the cleaning process as described below.
1. Prior to cleaning, switch off and disconnect the instrument from the voltage supply.
2. Clean the instrument with a moist cloth.
Electrical connections must not come into contact with moisture!
11442042.05 04/2020 EN/DE/FR/ES
14
EN
WIKA operating instructions model TF35
CAUTION!
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
Do not use any aggressive cleaning agents.
▶
Do not use any hard or pointed objects for cleaning.
3. Wash or clean the dismounted instrument, in order to protect persons and the
environment from exposure to residual media.
For information on returning the instrument see chapter 7.2 “Return”.
7. Dismounting, return and disposal
7.1 Dismounting
WARNING!
Physical injuries and damage to property and the environment
through residual media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
▶
Before storage of the dismounted instrument (following use) wash or
clean it, in order to protect persons and the environment from exposure
to residual media.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Wash or clean the dismounted instrument, in order to protect persons
and the environment from exposure to residual media.
WARNING!
Risk of burns
During dismounting there is a risk of dangerously hot media escaping.
▶
Let the instrument cool down sufficiently before dismounting it!
6. Maintenance and cleaning /
7. Dismounting, return ...
11442042.05 04/2020 EN/DE/FR/ES
15
EN
WIKA operating instructions model TF35
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
The dismounting of the instrument may only be carried out by skilled
personnel.
▶
Remove the threaded thermometer once the system has been isolated
from power sources.
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media and high
pressures.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Dismount the threaded thermometer with the voltage disconnected.
7.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media in the dismounted instrument can result in a risk to
persons, the environment and equipment.
▶
With hazardous substances, include the material safety data sheet for
the corresponding medium.
▶
Clean the instrument, see chapter 6.2 “Cleaning”.
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading “Service” on our
local website.
7. Dismounting, return and disposal
11442042.05 04/2020 EN/DE/FR/ES
16
EN
WIKA operating instructions model TF35
7.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
Do not dispose of with household waste. Ensure a proper disposal in
accordance with national regulations.
8. Specifications
Specifications
Temperature ranges
Medium temperature
- Pt1000
■
-50 … +200 °C [-58 ... +392 °F]
■
-50 … +250 °C [-58 ... +482 °F]
- Pt100
■
-50 … +200 °C [-58 ... +392 °F]
■
-50 … +250 °C [-58 ... +482 °F]
- NTC -30 … +130 °C [-22 ... +266 °F]
- KTY -50 … +150 °C [-58 ... +302 °F]
Ambient temperature
- AMP Junior Power Timer connector -40 ... +130 °C [-40 ... +266 °F]
- FASTON blade terminal -40 ... +130 °C [-40 ... +266 °F]
- Deutsch instrument connector
DT04-2P
-40 ... +130 °C [-40 ... +266 °F]
- Bayonet connector DIN 72585 -40 ... +130 °C [-40 ... +266 °F]
- Circular connector M12 x 1 -40 ... +90 °C [-40 ... +194 °F]
- Rectangular connector per
EN 175301-803
-40 ... +100 °C [-40 ... +212 °F]
Static operating pressure Max. 50 bar [725 psi]
Electrical connection
■
AMP Junior Power Timer connector
■
FASTON blade terminal 6.3 x 0.8 mm
■
Deutsch instrument connector DT04-2P
■
Bayonet connector DIN 72585
■
Circular connector M12 x 1
■
Circular connector M12 x 1 with neck tube
45 mm
■
Rectangular connector EN 175301-803
7. Dismounting, return ... / 8. Specifications
11442042.05 04/2020 EN/DE/FR/ES
17
EN
WIKA operating instructions model TF35
8. Specifications
Specifications
Ingress protection 1)
AMP Junior Power Timer connector IP66, IP67
FASTON blade terminal IP52
Deutsch instrument connector DT04-2P IP66, IP67, IP69K
Bayonet connector DIN 72585 IP66, IP67
Circular connector M12 x 1 IP66, IP67
Rectangular connector per EN 175301-803 IP65
1) The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress
protection.
For further specifications see WIKA data sheet TE 67.10 and the order documentation.
11442042.05 04/2020 EN/DE/FR/ES
18
EN
WIKA operating instructions model TF35
WIKA Betriebsanleitung Typ TF3520
11442042.05 04/2020 EN/DE/FR/ES
1. Allgemeines
■
Der in der Betriebsanleitung beschriebene Einschraubthermometer wird nach dem
aktuellen Stand der Technik konstruiert und gefertigt. Alle Komponenten unterliegen
während der Fertigung strengen Qualitäts- und Umweltkriterien. Unsere Manage-
mentsysteme sind nach ISO 9001 und ISO 14001 zertifiziert.
■
Diese Betriebsanleitung gibt wichtige Hinweise zum Umgang mit dem Gerät.
Voraussetzung für sicheres Arbeiten ist die Einhaltung aller angegebenen
Sicherheitshinweise und Handlungsanweisungen.
■
Die für den Einsatzbereich des Gerätes geltenden örtlichen Unfallverhütungsvor-
schriften und allgemeinen Sicherheitsbestimmungen einhalten.
■
Die Betriebsanleitung ist Produktbestandteil und muss in unmittelbarer Nähe
des Gerätes für das Fachpersonal jederzeit zugänglich aufbewahrt werden.
Betriebsanleitung an nachfolgende Benutzer oder Besitzer des Gerätes weitergeben.
■
Das Fachpersonal muss die Betriebsanleitung vor Beginn aller Arbeiten sorgfältig
durchgelesen und verstanden haben.
■
Es gelten die allgemeinen Geschäftsbedingungen in den Verkaufsunterlagen.
■
Technische Änderungen vorbehalten.
■
Weitere Informationen:
- Internet-Adresse: www.wika.de / www.wika.com
- zugehöriges Datenblatt: TE 67.10
- Anwendungsberater: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
1. Allgemeines
DE
Table of contents
Languages:
Other WIKA Thermometer manuals
