Wilfa POWER FUEL PB2B-P1200 User manual

EN ·Instruction manual NL ·Instructies
NO ·Bruksanvisning PL ·Instrukcje
SE ·Bruksanvisning FR ·Instructions
DK ·Betjeningsvejledning IT ·Manuale di istruzioni
FI ·Käyttöohje ES ·Manual de instrucciones
DE ·Anleitung RU · 

POWER FUEL
HIGH-POWER BLENDER
PB2B-P1200

NO
SE
DK
FI
EN
NL
PL
FR
IT
ES
RU
DE
LES ALLE ANVISNINGER FØR BRUK
LÄS IGENOM ALLA INSTRUKTIONER INNAN PRODUKTEN ANVÄNDS
LÆS ALLE VEJLEDNINGER INDEN BRUG
LUE OHJEET HUOLELLISESTI ENNEN KÄYTTÖÄ
READ ALL INSTRUCTIONS BEFORE USE
LEES VÓÓR GEBRUIK ALLE INSTRUCTIES
PRZED UŻYCIEM ZAPOZNAĆ SIĘ ZE WSZYSTKIMI ZALECENIAMI
PRENEZ CONNAISSANCE DE TOUTES LES INSTRUCTIONS AVANT UTILISATION
LEGGERE TUTTE LE ISTRUZIONI PRIMA DELL’USO
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR
ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПРОЧТИТЕ ВСЕ ИНСТРУКЦИИ
LESEN SIE DIE ANLEITUNG VOR DEM GEBRAUCH GRÜNDLICH DURCH

2
EN
INSTRUCTION MANUAL · POWER FUEL
INSTRUCTION MANUAL · POWER FUEL

3
EN
BLENDER ·PB2B-P1200
CONTENTS
4 IMPORTANT SAFETY INSTRUCTIONS
8 PRODUCT OVERVIEW
9 USING YOUR TAMPER INCL. PB2B-P1200
10 CONTROL PANEL
10 HOW TO USE
12 CLEANING AND STORAGE
12 OPERATING NOTES
13 VEGETABLE SOUP
14 GUARANTEE
15 PRODUCT SPECIFICATIONS
15 SUPPORT AND SPARE PARTS
15 RECYCLABILITY

4
EN
INSTRUCTION MANUAL · POWER FUEL
IMPORTANT SAFETY INSTRUCTIONS
• Please read this manual carefully before operation
and save it for future reference.
• Before plugging in the appliance, check that
the electrical rating shown on the rating plate
corresponds with your household electricity
supply.
• Never immerse the base unit of the appliance in
water or other liquid, or rinse it under the tap,
in order to avoid risk of short-circuit or electric
shock. If there is water inside the base unit, please
contact an authorized service agent.
• Never put the power cord or plug into water
cleaning. Do not wipe the plug prongs with a
damp cloth, or insert the plug with wet hands.
• Plug the appliance into the wall socket rmly and
securely. A loose plug could lead to overheating
or electric shock.
• If the power cord is damaged, it must be replaced
by the manufacturer or its service agents or
similarly qualied electricians in order to avoid a
hazard.
• Never leave the appliance unattended.

5
EN
BLENDER ·PB2B-P1200
• Keep hands and utensils out of the container while
the motor is running to prevent the possibility of
severe injury and/or damage.
• Do not run the appliance without loading the
blender jug.
• To prevent spillage, do not ll liquid in the blender
jug above the MAX line.
• Do not expose the appliance to heat sources such
as a radiator or sun shining through a window.
• To ensure good ventilation, do not place a cloth
underneath the appliance.
• For indoor use only. Do not use outdoors or for
commercial purposes.
• Always operate with the lid in place. When
processing hot beverages, properly secure the
lid and measuring cup to avoid scalding due to
spraying of hot liquids.
• Appliances may be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge, provided they are
supervised or have been instructed in the safe
use of the appliance and understand the hazards
involved.

6
EN
INSTRUCTION MANUAL · POWER FUEL
• Children should be supervised to ensure that they
do not play with the appliance.
• This appliance must not be used by children.
Keep the appliance and its cord out of reach of
children.
• Switch off the appliance and disconnect from the
power supply before changing accessories or
working near parts that move in use.
• Unplug the power cord from the wall socket when
appliance is not in use, before assembling or
removing parts, and before cleaning.
• If the motor has overheated, the temperature
monitoring system will trigger and the motor will
stop. Switch off and unplug the appliance and
let the motor cool down. The motor temperature
monitoring system will reset after the blender
has been unplugged from the wall socket for 45
minutes. After this time, the blender can be used
again.
• The blade is very sharp, so use caution when
handlingtheblade.Donotattempttodisassemble
the blade assembly or touch any rotating parts.
• Any servicing should be performed by an
authorized service representative. Do not attempt
to disassemble, repair or modify the appliance.

7
EN
BLENDER ·PB2B-P1200
• Always disconnect the appliance from the power
supply if it is to be left unattended and before
assembling, disassembling or cleaning.

8
EN
INSTRUCTION MANUAL · POWER FUEL
PRODUCT OVERVIEW
1. Measuring cup
2. Lid
3. Blender jug
4. Blade assembly
5. Blade Mount
6. Drive Gear
7. Blender Jug Seat
8. Top Cover
9. Circular trim
10. Pulse/start/stop button
11. Speed Dial
12. Motor unit
13. Power cord
14. Bottom cover
15. Anti-skid rubber foot
16. Tamper incl. PB2B-P1200
EngelskEngelskEnglish
1
2
3
4
5
8
11
13
6
7
9
10
12
14
15
16
BPF-1200S
PB2B-P1200