Win enterprises Pl-10510 User manual

WIN Enterprises, Inc.

1

Networking Appliance

User’s Manual

Version 1.3

1U Rack-mount Intel® Celeron™ (codename Bay Trail) Network

System, Six Copper GbE, CF, SATA, PCIe and Bypass

PL-10510

Custom Embedded Solutions

WIN Enterprises, Inc.

2

This document contains proprietary information protected by copyright. All rights are reserved;

no part of this manual may be reproduced, copied, translated or transmitted in any form or by any

means without prior written permission of the manufacturer.

The content of this document is intended to be accurate and reliable. The original manufacturer

assumes no responsibility for any inaccuracies that may be contained in this manual. The

original manufacturer reserves the right to make improvements to the products described in this

manual at any time without prior notice.

Trademarks

IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business

Machine Corporation

Award is a trademark of Award Software International, Inc

Intel is a trademark of Intel

RTL is a trademark of Realtek

VIA is a trademark of VIA Technologies, Inc

Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks

of Microsoft Corporation

All other product names mentioned herein are used for identification purpose only and may be

trademarks and/or registered trademarks of their respective companies.

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy of this document, the

manufacturer and distributor assume no liability resulting from errors or omissions in this

document or from the use of the information contained herein.

For more information on PL-10510 or other WIN products, please visit our website.

For technical supports or free catalog, please send your inquiry to

www.win-ent.com.

[email protected].

WIN Enterprises, Inc.

3

Table of Contents

Chapter 1. General Information 4

1.1 Introduction 4

1.2 Specifications 5

1.3 Order Information 6

1.4 Packaging 6

1.5 Precautions 7

1.6 System Layout 8

1.7 Board Dimensions

Chapter 2. Connector/Jumper Conguration

2.1 Connector/Jumper Location and Definition .............................................. 10

2.2 Connector Define and Jumper Setting ......................................................... 12

2.3 CompactFlashTM Card Socket Pin Define ................................................... 20

Chapter 3. BIOS Setup .............................................................................................................. 21

3.1 Quick Setup ..................................................................................................................... 21

3.2 Entering the BIOS Setup Utility ....................................................................... 21

3.3 Menu Options................................................................................................................ 23

3.4 Advanced Menu ........................................................................................................... 23

3.5 Chipset Menu ............................................................................................................... 41

3.6 Security Menu .............................................................................................................. 43

3.7 Boot Menu....................................................................................................................... 44

3.8 Exit Menu .......................................................................................................................... 47

Chapter 4. Utility & Driver Installation.................................................................................. 48

4.1 Operation System Supporting........................................................................... 48

4.2 System Driver Installation .................................................................................... 48

4.3 LAN Driver Installation ........................................................................................... 49

Appendix A: Programming the Watchdog Timer............................................................ 50

Appendix B: LAN Bypass Function (Optional).................................................................... 51

Controlling LAN 1&2 (LAN 3&4) bypass function by watchdog timer... 51

Controlling LAN 1&2 (LAN 3&4) bypass function by GPIO ................. 51

Appendix C : Cable Development Kit.................................................................................... 52

..............................................................................................

.............................................................................................. 9

......................................................... 10

WIN Enterprises, Inc.

4

Chapter 1. General Information

1.1 Introduction

The PL-10510 is a 1U Rack-mounted hardware platform designed for network

service applications. Built with Intel® embedded IA components for warranted

longevity; it supports the Intel® Bay Trail low-voltage processor.

The platform supports high bandwidth DDR3L SODIMM slot with memory up to 8

GB. In order to provide the best network performance and utilization, the

expansive storage interfaces include 2.5” SATA HDD and CompactFlash™.

To enhance the network security performance, the PL-10510 is equipped with 6

GbE Copper ports, bypass function, USB2.0 ports, RJ-45 console port, mini-card

socket and LED indicators that monitor power, storage device activities for local

system management, maintenance and diagnostics. In addition, the PL-10510

supports one mini-PCIe card socket and is RoHS, FCC and CE compliant.

WIN Enterprises, Inc

5

1.2 Specifications

Processor

System

CPU

Intel® Celeron™ processorJ1900 (Bay Trail-D),

E3800 (Bay Trail-I) Processors

BIOS

AMI UEFI BIOS

Memory

Technology

Un-buffered and Non-ECC DDR3L 1333MHz memory.

Capacity

Up to 8GB with one SO-DIMM socket

Ethernet

GbE Ethernet

Six Copper GbE ports, Intel I211, PCI-E x1

LAN bypass

Two pairs bypass between LAN1, LAN2 and LAN3,

LAN4

Storage

SATA HDD

One internal 2.5”or one internal 3.5”SATA HDD bay

CompactFlash™

Socket

one CompactFlashTM Type II

I/O

USB

Rear: Two external USB2.0

Two internal 5x2 pin header

Serial

One RJ45 Console port (COM1)

Expansion

PCIe Slot

One Standard PCI-E x1 connector (Optional)

Power Supply

Watt

60W power supply

Mechanical

& Environmental

Form Factor

1U Rack-mount

LED

1 x Status LED (Green),

1 x HDD LED (Red),

1 x Power LED (Green),

1 x Bypass LED (Yellow)

Dimensions

（W x D x H）

432mm (W) x 270mm (D) x 44mm (H)

(17”W x 8”D x 1.7”H)

Operating

Temperature

Operating: 0 ~ 40°C ( 32 ~ 104°F )

Storage

Temperature

-20 ~ 75°C (-4 ~ 167°F)

Humidity

10 ~ 85% relative humidity, non-operating,

non-condensing

Certification

CE/FCC

WIN Enterprises, Inc

6

1.3 Ordering Information

We offer some accessories for PL-10510 appliance for customer needs.

PL-1051A

1U Rack-mount Intel® Celeron®

J1900 Network System, DDR3L, 6

Copper GbE, SATA, CF, Bypass

PL-1051B

1U Rack-mount Intel® Celeron®

J1900 Network System, DDR3L, 5

Copper GbE, SATA, CF, Bypass,

PCI-E

Optional

DK001

Cable development kit

CB -CO5204-01 Cross over cable

CB -EC5200-01 Ethernet cable

CB -RJDB91-01 RJ45 Console

cable

CB -DB9200-01 Null modem cable

CB -IVGA01-01 VGA cable

CB -IPS200-00 KB/MS cable

CB -IUSB01-00 USB cable

1.4 Packaging

Please make sure that the following items have been included in the package

before installation.

1. PL-10510 Appliance

2. Quick Installation Guide (Optional)

3. Cables (Optional)

4. CD-ROM that contains the following folders:

(1) Manual

(2) System Driver

(3) Ethernet Driver

(4) Utility Tools

If any item of above is missing or damaged, please contact your dealer or retailer

from whom you purchased the PL-10510 . Keep the box and carton if you anticipate

shipment or storage of the PL-10510 in near future. After you unpack the goods,

WIN Enterprises, Inc

7

inspect and make sure the packaging is intact. Do not plug the power adapter to

the appliance of PL-10510 if it is perceived to be damaged.

Note: Keep the PL-10510 in the original packaging until you start installation.

1.5 Precautions

Please make sure you properly ground yourself before handling the PL-10510

appliance or other system components. Electrostatic discharge can be easily

damage the PL-10510 appliance .

Do not remove the anti-static packing until you are ready to install the PL-10510

appliance.

Ground yourself before removing any system component from it protective

anti-static packaging. To ground yourself, grasp the expansion slot covers or

other unpainted parts of the computer chassis.

Handle the PL-10510 appliance by its edges and avoid touching the

components on it.

CAUTION

Risk of explosion if battery is replaces by an incorrect type.

Dispose of used batteries according to instructions.

WIN Enterprises, Inc

8

1.6 System Layout

PL-10510, Front Side

>>Layout

PL-10510, System Layout

>>Layout

WIN Enterprises, Inc

9

1.7 Board Dimensions

WIN Enterprises, Inc

10

Chapter 2. Connector/Jumper Conguration

2.1 Connector/Jumper Locations and Definitions

WIN Enterprises, Inc

11

MB-10510* Connector list

Connector

Dene

Connector

Dene

CN1

SYSTEM FAN

CN18

PS2 KB/MS (Pin Header)

CN2

CPU FAN

CN19

PCIe X1 Slot (Opon)

CN3

SYSTEM FAN

CN20

Power Switch

CN4

Wireless LAN LED (opon)

CN21

Status LED (Pin Header)

(Co-Layout with LED16)

CN5

USB Port 2 & 3 (Pin Header)

CN22

USB Port 0 & 1

CN6

VGA (Pin Header)

CN23

DC-IN (Pin Header)

(Co-Layout with CN31)

CN7

SATA Power Connector

CN24

LAN1

CN8

KEY PAD (Pin Header)

CN25

LAN2

CN9

LCM (Pin Header)

CN26

LAN3

CN10

SPI (Pin Header)

CN27

LAN4

CN11

SATA Connector

CN28

LAN5

CN12

COM2 (Pin Header)

CN29

LAN6

CN13

GPIO (Pin Header)

CN30

COM1(Console Port)

CN14

MINI-PCIe (Opon)

CN31

DC-IN (Power Jack)

(Co-Layout with CN23)

CN17

LPC (Pin Header)

* Motherboard

WIN Enterprises, Inc

12

2.2 Connectors Defined and Jumper Settings

Connector Location & Dened

CN1/CN2/CN3：System/CPU FAN

Define

1

Ground

2

+12V

3

Speed Detect

CN7：SATA PWR

1

2

3

4

Define

1

+12V

2

GND

3

GND

4

+5V

CN8：Keypad header

Define

1

ACK#

2

BUSY

3

PE

4

SLCT

5

GND

WIN Enterprises, Inc

13

CN9：LCM Pin Header

2

3

6

8

10

12

14

16

1

5

7

9

11

13

15

Define

1

+5V

2

GND

3

P_AFD#

4

NC

5

P_INIT#

6

P_SLIN#

7

LCM_PD1

8

LCM_PD0

9

LCM_PD3

10

LCM_PD2

11

LCM_PD5

12

LCM_PD4

13

LCM_PD7

14

LCM_PD6

15

LCM_BK_CTRL

16

BK_CTRLP

CN10：SPI Pin Header

Define

1

+1.8V

2

GND

3

CS#

4

SCLK

5

MISO

6

MOSI

7

N/A

8

IO

CN11：SATA Connector

Signal

1

GND

2

TXP

3

TXN

4

Ground

5

RXN

6

RXP

7

GND

WIN Enterprises, Inc

14

CN12：COM2 pin header

Define

1

DCD#

2

DSR#

3

SIN#

4

RTS#

5

SOUT#

6

CTS#

7

DTR#

8

RI#

9

Ground

10

N/A

CN13：GPIO

Define

1

+3.3V

2

SIO_GP50

3

SIO_GP51

4

SIO_GP52

5

SIO_GP53

6

SIO_GP54

7

SIO_GP55

8

SIO_GP56

9

SIO_GP57

10

11

+5V

12

GND

WIN Enterprises, Inc

15

CN14：MINI-PCIE

CN6

MINI_PCIE

WAKE#

13.3V 2

RESERVED

3

RESERVED

5

CLKREQ#

7

GND

9

REFCLK-

11

REFCLK+

13

GND

15

RESERVED

17

RESERVED

19

GND

21

PERN0

23

PERP0

25

GND

27

GND

29

PETN0

31

PETP0

33

GND

35

RESERVED

37

RESERVED

39

RESERVED

41

RESERVED

43

RESERVED

45

RESERVED

47

RESERVED

49

RESERVED

51 +3.3V 52

GND 50

+1.5V 48

LED_WPAN# 46

LED_WLAN# 44

LED_WWAN# 42

GND 40

USB_D+ 38

USB_D- 36

GND 34

SMB_DATA 32

SMB_CLK 30

+1.5V 28

GND 26

+3.3VAUX 24

PERST# 22

RESERVED 20

GND 18

RESERVED 16

RESERVED 14

RESERVED 12

RESERVED 10

RESERVED 8

1.5V 6

GND 4

Define

1

WAKE#

2

3.3V

3

Reserved

4

GND

5

Reserved

6

1.5V

7

CLKREQ#

8

Reserved

9

GND

10

Reserved

11

REFCLK-

12

Reserved

13

REFCLK+

14

Reserved

15

GND

16

Reserved

17

Reserved

18

GND

19

Reserved

20

Reserved

21

GND

22

PERST#

23

PERN0

24

+3.3VAUX

25

PERP0

26

GND

27

GND

28

+1.5V

29

GND

30

SMB_CLK

31

PETN0

32

SMB_DATA

33

PETP0

34

GND

35

GND

36

USB_D-

37

Reserved

38

USB_D+

39

Reserved

40

GND

41

Reserved

42

LED_WWAN#

43

Reserved

44

LED_WLAN#

45

Reserved

46

LED_WPAN#

47

Reserved

48

+1.5V

49

Reserved

50

GND

WIN Enterprises, Inc

16

51

Reserved

52

+3.3V

CN17：LPC Pin Header

Define

1

+3.3V

2

AD 0

3

AD1

4

AD 2

5

AD 3

6

Frame#

7

PCIERST#

8

+5V

9

CLOCK

10

PME#

11

GND

12

13

SERIRQ

14

DRQ#

CN18：PS2 KB/MS Pin Header

Define

1

KCLK

2

MCLK

3

KDAT

4

MDAT

5

N/A

6

N/A

7

PS2_GND

8

PS2_GND

9

PS2_VCC

10

PS2_VCC

WIN Enterprises, Inc

17

CN22：USB Connector

Define

1

+5V

2

DATA0-

3

DATA0+

4

GND

5

+5V

6

DATA1-

7

DATA1+

8

GND

CN24~29：LAN RJ-45 Connector

Define

1

TX+

2

TX-

3

RX+

4

Chassis Ground

5

Chassis Ground

6

RX-

7

Chassis Ground

8

Chassis Ground

D1: Speed indicated LED

1 Gbps

GREEN

100 Mbps

YELLOW

D2 :Link/Activity LED

Link

GREEN

Activity

BLINKING

WIN Enterprises, Inc

18

CN30：COM1 (Console) Connector

RJ45

Define

1

CTS#

2

DTR#

3

TXD#

4

GND

5

GND

6

RXD#

7

DSR#

8

RTS#

CN31：DC +12V Power Jack (2Pin)

11

22

Define

1

+12V

2

GND

WIN Enterprises, Inc

19

Jumper Settings

JP1：Clear CMOS

Setting

1-2

Normal

Operation

2-3

Clear CMOS

JP2：LAN1 & LAN2 bypass select

Setting

1-2

By-pass mode

2-3

Normal

operation

JP3：LAN3 & LAN4 bypass select

Setting

1-2

By-pass mode

2-3

Normal

operation

JP4：Reset Button Function Select

Setting

1-2

For GPI Input

2-3

For Reset

WIN Enterprises, Inc

20

JP5：Watching Dog Function Select

Setting

1-2

For Reset

2-3

For LAN Bypass

2.3 CompactFlashTM Card Socket Pin Defined

CompactFlashTM card is a small removable mass storage device. It can provide

complete PCMCIA-ATA functionality and compatibility plus True IDE functionality

compatible with ATA/ATAPI-4.

CompactFlashTM storage products are solid state form factor, it means they

contain no moving parts. Thus, it provides users with much greater protection

of the data than conventional magnetic disk device.

Assignment

1

Ground

11

Ground

21

D00

31

D15

41

RESET

2

D03

12

Ground

22

D01

32

CS

42

ORDY

3

D04

13

VCC

23

D02

33

NC

43

DREG

4

D05

14

Ground

24

WP

34

IOR

44

DACK

5

D06

15

Ground

25

NC

35

IOW

45

LED

6

D07

16

Ground

26

NC

36

WE

46

BVD

7

CS

17

Ground

27

D11

37

RDY/BSY

47

D08

8

Ground

18

A02

28

D12

38

VCC

48

D09

9

Ground

19

A01

29

D13

39

SCSE

49

D10

10

Ground

20

A00

30

D14

40

NC

50

Ground

WIN Enterprises PL-10510 User manual

Popular Network Hardware manuals by other brands