WIN Enterprises PL-80460 User manual

163
WIN Enterprises, Inc.
1
Apr., 2010
User's Manual
PL-80460
Networking Appliance
2U Rack-mount Intel
®
32nm Sandy ridge Intel
®
i3/i5/i 7 and E3 xx
with LGA1155 processors, Network Appliance with 4 x GbE, SATA, CF,
bypass function
User's Manual
Version 1.0

263
WIN Enterprises, Inc.
2
Apr., 2010
User's Manual
© Copyright WIN Enterprises. All
Rights Reserved Manual Edition 1.0
Dec 2011
This document contains proprietary information protected by copyright. All rights are reserved;
no part of this manual may be reproduced, copied, translated or transmitted in any form or by
any means without prior written permission of the manufacturer. The content of this document is
intended to be accurate and reliable; the original manufacturer assumes no responsibility for any
inaccuracies that may be contained in this manual. The original manufacturer reserves the right to
make improvements to the products described in this manual at any time without prior notice.
Trademarks
IBM, GA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation. Award is a trademark of Award Software International, Inc. Intel is a trademark of Intel. RTL
is a trademark of Realtek. VIA is a trademark of VIA Technologies, Inc. Microsoft, Windows, Windows NT and
MS-DOS are either trademarks or registered trademarks of Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be trademarks
and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer and
distributor assume no liability resulting from errors or omissions in this document, or from the use of the
information contained herein.
For more information on PL-80460 or other WIN products visit our website at
www.win-enterprises.com.
For technical support please send your inquiry to sales@win-
ent.com.

363
WIN Enterprises, Inc.
3 Apr., 2010
User's Manual
Table of Contents
Chapter 1. General Information .......................................................................................... 4
1.1 Introduction ............................................................................................................................ 4
1.2 Specifications ......................................................................................................................... 4
1.3 Ordering Information ......................................................................................................... 6
1.4 Packaging ............................................................................................................................... 7
1.5 Precautions .............................................................................................................................. 7
1.6 System Layout ......................................................................................................................... 8
1.7 oard Dimensions ..................................................................................................................... 9
Chapter2. Connector/Jumper Configurations ..................................................................... 10
2.1 Connector/Jumper Location and Definitions ................................................................ 10
Connector/Jumper Location and Definitions ............................................................ 11
2.2 Connector and Jumper Setting ........................................................................................ 12
2.3 CompactFlashTM Card Socket Pin Define ....................................................................... 42
Chapter 3. Optional GbE Module Et Riser Card Setting ................................................... 43
3.1 R202A: Expansion module with 4 RJ45 GbE ports. ..................................................... 43
3.3 R202C: Expansion module with 4 RJ45 GbE ports with two pairs bypass. ....... 45
3.4 R204A: Expansion module with 4 SFP ports Et 4 RJ45 GbE ports. ................ 46
3.5 R204 : Eth Expansion module with 4 SFP ports Et 4 RJ45 GbE ports with two pairs
bypass. .......................................................................................................................................... 47
3.6 R221A: Expansion module with 8 SFP . .............................................................. 48
3.7 R222A: Expansion module with 8 RJ45 GbE ports ................................................ 49

463
3.8 R223A: Expansion module with 6 SFP ports Et 2 RJ45 GbE ports. .................... 50
3.9 R223 : Expansion module with 6 SFP ports Et 2 RJ45 GbE ports with one pairs
bypass. ..................................................................................................................................... 51
3.10 R224A: Expansion module with 2 SFP+ 10GbE ports ................................ 52
Chapter 4. Utility & Driver Installation ......................................................................... 53
4.1 Operating System Support .................................................................................. 53
4.2 System Driver Installation ........................................................................................ 54
4.3 LAN Driver Installation ............................................................................................. 54
4.4 Watchdog Timer Programming Guide .................................................................... 55
4.5 Programming the GPIO ............................................................................................... 60

563
User's Manual
Chapter1. General Information
1.1 Introduction
The PL-80460 is a 2U rack-mounted hardware platform designed for network service
applications. uilt with Intel® Embedded IA components with warranty of longevity, the PL-
80460 supports a single Intel® 32nm Sandy ridge i3/i5/i7 and E3 xx processor and
LGA1155. The platform supports four unbuffered and non- ECC DDR3 1066/1333MHz DIMM
sockets with memory up to 32 G . In order to provide the best network performance and best
system utilization, powerful storage interfaces include two 3.5" SATA HDD and one
CompactFlash'''. The PL-80460 also supports one PCI expansion slot.
This platform affords 4 GbE and max 28 GbE Ethernet ports on the front panel. The front panel
also has one US 2.0 port, one RJ-45 console port and LED indicators that monitor power and
storage device activities for local system management, maintenance and diagnostics. In addition,
the PL-80460 is RoHS, FCC and CE compliant.
1.2 Specifications
CPU Support Single Intel® 32nm Sandy ridge
i3/i5/i7 and E3xx processors, LGA1155
Chipset Cougar Point C206 PCH
Processor System
IOS AMI 8Mbit U EFI flash
Technology ECC/non- ECC, un-buffered 2-Channels
DDR3 1066/1333 MHz memory
Memory
Capacity Up to 32G with 4 DIMM sockets
Expansion Expansion Slots Onboard one PCI-E x 8 slot
(180°),SLOT1 Onboard tree PCI-E x 16
slot (180°), SLOT2, SLOT3, SLOT4
Onboard one PCI SLOT
** Onboard one PCI-E x 4 SLOT (only
supports E3xx processors (optional)
Ethernet GbE Ethernet Module R176 supports four GbE, Intel
82574L PCI- E x1, with two pairs bypass
function (optional)
HDD two internal 3.5" SATA HDD bay Storage
Compact Flash Socket One Compact Flash
TM
Type I/II
One 44pin ID E connector
WIN Enterprises, Inc. 4 Apr., 2010

663
WIN Enterprises, Inc.
5
Apr., 2010
User's Manual
US One External US 2.0
Internal: 2 x US Pin-header
I/O
Serial One RJ45 Console port (COM1)
One internal header for second console
(COM2)
Power Supply Watt ATX power supply
Form Factor 2U rackmount
LCD Module Optional
Keypad Optional
LED Front panel: tree LED with
module R176 One Power LED
(Green) One HDD LED (Yellow)
One bypass L ED*( Green)
Dimensions ( W x D x H ) 435mm (W) x 500mm (D) x 88mm
(H) (17.1" W x 19.6" D x 3.4" H)
Operating Temperature Operating: 0 - 40°C ( 32 - 104°F )
Mechanical and
Environmental
Humidity 10 - 85% relative humidity, non-operating,
non-condensing
Weight 1pc/CTN, 10kgs, 77.4cm(W) x 64.2cm(D) x 33.6cm(H)
Certification CE/FCC

763
W
IN Enterprises, Inc.
6
Apr., 2010
User's Manual
1.3 Ordering Information
PL-8046A 2U Rack-Mount, Support LGA1155 Support Single Intel® 32nm Sandy
ridge i3/i5/i7 and E3 xx processors, 4 x RJ45 GbE ports,
PL-8046 2U Rack-Mount, Support LGA1155 Support Single Intel® 32nm Sandy
ridge i3/i5/i7 and E3 xx processors, 4 x RJ45 GbE ports, 2 pairs bypass
DK001 Cable development kit
Note: Accessories are available for PL-80460

863
WIN Enterprises, Inc.
7
Apr., 2010
User's Manual
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. PL-80460 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any item of above items are missing or damaged contact your dealer or retailer from
whom you purchased the PL-80460. Retain the box and carton for near-term shipment
or storage. After you unpack the goods, inspect and make sure the packaging is intact.
Do not plug the power adapter to the appliance of PL-80460 if you find it appears
damaged.
Note: Keep the PL-80460 in the original packaging until you begin your
installation.
1.5 Precautions
G round yourself before handling the PL-80460 appliance or its system components.
Electrostatic discharge can be easily damage the appliance.
Do not remove the anti-static packing until you are ready to install the PL-80460
appliance.
Ground yourself before removing any system component from it protective anti-static
packaging. To ground yourself, grasp the expansion slot covers or other unpainted parts
of the computer chassis.
Handle the PL-80460 appliance by its edges and avoid touching the components on it.

963
WIN Enterprises, Inc.
8
Apr., 2010
User's Manual
1.6 System Layout
PL-80460 Front Side
PL-80460 Back Side

1063
WIN Enterprises, Inc.
9
Apr., 2010
9106
OD,OCC
.
Eauuo
_______________________
it
m
y ....oi
l.
401
09161:16k
4±I
maid
-
•
••
•:
-
E N E N
• . .
03ffiVra4
.1E91
4
.
4
dIRL
,
P,L
se.
.
•
••
•• • • • • 31
HI IR HI 11
0
-
__
^79.17:
•
AN'
_
1
11.Hfi
'.CC
__
LCP.CO
fi
•..
User's Manual
1.7 Board Dimensions

1163
WIN Enterprises, Inc.
10
Apr., 2010
User's Manual
Chapter2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition

1263
WIN Enterprises, Inc.
11
Apr., 2010
User's Manual
Connector Location and Definition
NO. Description NO. Description
CN1 Power ON CN17 Port 80
CN2 FAN Connector CN18 SPI FLASH download Header
CN3 FAN Connector CN19 PS2 KB/ MS Pin Header
CN4 FAN Connector CN20 COM2 Box Header
CN5 FAN Connector CN21 SATA CONNECTOR
CN6 FAN Connector CN22 SATA CONNECTOR
CN7 FAN Connector CN23 SATA CONNECTOR
CN8 FAN Connector CN24 SATA CONNECTOR
CN9 FAN Connector CN25 LCM BACKLIGHT
CN10 12V POWER CONNECTOR ( 8 PIN) CN26 GPI
CN11 VGA Box Header CN27 LCM Box Header
CN12 ATX Power Connector ( 24 PIN) CN28 PCI- E x16 Connector (Signal use PCI E X8)
CN13 System Reset Pin Header CN29 PCI- E x16 Connector (Signal use PCI E X8)
CN14 USB Pin Header CN30 PCI- E x16 Connector (Signal use PCI E X4)
CN15 ID E 44 Pin BOX Header CN31 PCI- E x8 Connector (Signal use PCI E X1)
CN16 Cfast Connector(optional)
,
CF1
CF Connector
Connector/Jumper Location and Definition
NO. Description
JP1 PEG PORT CONFIG SELECT ( JP1 1-2 FOR PCI E X8 JP1 2-3 FOR PCI E 1X8 + 2X4)
JP2 V_SA VOLTAGE S ELCT (OPEN = 0.925V CLOSE = 0.85V)
JP3 RESET Et GPI SELECT (1-2 FOR GPI ; 2-3 FOR RESET)
JP4 WATCH DOG Et BY-PASS:
(1-2 FOR BY-PASS ; 2-3 FOR WATCH DOG)
JP5 CLEAR CMOS:
(1-2 FOR NORMAL ; 2-3 FOR CLEAR CMOS)
JP6 AT Et ATX MODE SELECT:
(1-2 FOR ATX MODE ;2-3 FOR AT MODE)
JP7 ATX Et AT Power SELECT:
(1-2 FOR ATX ; 2-3 FOR AT)

1363
WIN Enterprises, Inc.
12
Apr., 2010
User's Manual
2.2 Connector and Jumper Setting
CN1: ATX Power On Switch
PIN Description
1 GND
2 PANSWIN#
CN2(CN4)/CN3(CN5)/CN6(CN9)/CN8(CN7): FAN Connector
PIN Description
1 GND
2 +12V
3 SENSE
FAN CONN-1*3 WAFER
CN10: 12V POWER CONNECTOR ( 8 PIN )
PIN Description
1
GND
2 GND
3
GND
4 GND
5
+12V
6 +12V
7
+12V
8 +12V
ATX CONN 2X4_4.2mm_D90/DIP

WIN Enterprises, Inc.
13
Apr., 2010
User's Manual
CN11:VGA Box Header
PIN Description PIN Description
1
R
2
G
3
B
4
1K Pull +5V
5 GND 6 GND
7
GND
8
GND
9
+5V
10
GND
11 1K Pull +5V 12 SPD2
13
HSYNC
14
VS
YNC
15
SPCLK2
16
NC
CN12:ATX Power Connector ( 24 PIN )
PIN Description PIN Description
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS-ON#
5 GND 1 7 GND
6 +5V 18 GND
7 GND 19 GND
8 PWROK 20 RSVD
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GND

WI
N Enterprises, Inc.
14
Apr., 2010
User's Manual
CN13: System Reset Pin Header
PIN Description
1 FP_RESET_SW/GP106
2 GND
CN14: USB Pin Header
PIN Description PIN Description
1 +5V 2 +5V
3
USB_PN_O
4
USB_PN_1
5 USB_PN_O 6 USB_PP_1
7 GND 8 GND
NONE 10 GND

1663
WIN Enterprises, Inc.
15
Apr., 2010
User's Manual
CN15: ID E 44 Pin BOX Header
PIN Description PIN Description
1 ID E_RST_N 2 PRST
3
PDD7
4
PDD8
5
PDD6
6
PDD9
7
PDD6
8
PDD10
9
PDD4
10
PDD11
11
PDD3
12
PDD12
13
PDD2
14
PDD13
15 PDD1 16 PDD14
1 7
PDDO
18
PDD15
19
GND
20
NC
21
PDDR EQ
22
GND
23
PDIOW#
24
GND
25
PDIOR#
26
GND
2 7
ID E _IORDY
28
PRI_PD1
29
ID E DACK_N
30
GND
31
ID E_IRQ_
32
NC
33
P
DA1
34
ID E_CALID#
35 PDAO 36 PDA2
3 7
PCS1#
38
PCS3#
39
ID E_L ED_N
40
GND
41
+5V
42
+5V
43
GND
44
NC
BOX Header 2x22(2.0mm)/DP

1763
WIN Enterprises, Inc.
16
Apr., 2010
User's Manual
CN16: CFast Connector (Optional)
PIN Description PIN Description
S1 GND PCI10 NC
S2 CFAST_SATA_TXP_C
PCI11
NC
S3 CFAST_SATA_TXN_C
PCI12
NC
S4 GND PCI13 V3P3
S5
CFAST_SATA_ RXN_C PCI14 V3P3
S6 CFAST_SATA_RXP_C
PCI15 GND
S 7 GND PCI16 GND
PCI1 NC PCI17 NC
PCI2 GND NC1 NC
PCI3 CFAST_PIN10 NC2 NC
PCI4 CFAST_PIN11 NC3 NC
PCI5 CFAST_UAO NC4 NC
PCI6 CFAST_UAI NC5 NC
PCI17
GND NC6 NC
PCI18
TP_CFAST_LED1 NC 7 NC
PCI19
TP_CFAST_LED2 NC8 NC

WIN Enterprises, Inc.
17
Apr., 2010
User’s Manual
CN17: Port 80
?
?
CN18: SPI FLASH downloads Header
PIN
?
?
?
?
CN19: PS2KB/MS Header
PIN
Description Description
PIN
PIN
Description Description
PIN
Description
PIN
Description
1
3
5
7
9
11
2
4
6
8
10
11
+3.3V
LAD1
LAD3
RST_CHIP#
CLK_33M_PORT80
GND
LAD0
LAD2
LFRAME#
+5V
NC
GND
1
3
5
7
2
4
6
8
+3.3V
SPI_PCH_CS0_N
SPI_PCH_MISO_R
NC
GND
SPI_PCH_CLK0
SPI_PCH_MOSI_R
FLASH_IO
Keyboard CLK
Keyboard Data
Key Pin
GND
+5V
1
3
5
7
9
Mouse CLK
Mouse Data
NC
GND
+5V
8
6
2
4
10

WIN Enterprises, Inc.
18
Apr., 2010
User's Manual
CN20: COM2Box Header
PIN Description PIN Description
1 DCD#2 6 DSR#2
2
RXD#2
7
RTS#2
3 TXD#2 8 CTS#2
4
DTR#2
9
RI#2
5
GND
10
NC
CN21/CN22/CN23/CN24: SATA 1/2/3/4 CONNECTOR
PIN Description
1 GND
2
SATA_TXP
3
SATA_TXN
4 GND
5
SATA_RXN
6
SATA_RXP
7
GND

WIN Enterprises, Inc.
19
Apr., 2010
User's Manual
CN25: LCM BACKLIGHT
PIN
1LCM_EN
2
+5V
CN26: GPI
PIN
1
2
3
4
5
Description
Description
GPIO30
GPIO31
GPIO32
GPIO33
GND