WIN Enterprises PL-80230 User manual

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
1
PL-80230
Networking Appliance
1U Rack-mount Intel® Core
TM
2 Quad Network Appliance with
6 x GbE, SATA, CF, bypass function
User’s Manual
Version 1.0b, 312

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
2
© Copyright 2008. All Rights Reserved
Manual Edition 1.0b, March, 2012
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark of Award Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on PL-80230 or other WIN ENTERPRISES products, please visit our website
http://www.win-ent.com.
For technical support send your inquiries to [e-mail].

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
3
Table of Contents
Chapter 1. General Information ........................................................................... 5
1.1 Introduction ................................................................................................... 5
1.2 Specifications ................................................................................................ 5
1.3 Ordering Information..................................................................................... 6
1.4 Packaging ...................................................................................................... 7
1.5 Precautions .................................................................................................... 7
1.6 System Layout............................................................................................... 8
1.7 Board Dimensions ......................................................................................... 9
Chapter 2. Connector/Jumper Configuration ...................................................... 10
2.1 Connector/Jumper Location and Definition.................................................. 10
2.2 Connector and Jumper Setting ..................................................................... 12
2.3 CompactFlash
TM
Card Socket Pin Define..................................................... 27
Chapter 3. Optional GbE Module & Riser Card Setting ..................................... 28
3.1 R119: Ethernet module with two GbE Copper and two GbE SFP................. 28
3.2 R120: Ethernet module with four GbE SFP.................................................. 29
3.3 R121: Ethernet module with two GbE Copper or SFP.................................. 30
3.4 R122: Ethernet module with four GbE Copper............................................. 31
3.5 R127: Ethernet module with eight GbE Copper............................................ 32
3.6 R130: Ethernet module with eight GbE SFP ................................................ 33
3.7 R137: Ethernet module with four GbE Copper............................................. 34
3.8 R117: Riser card for expansion module PCI-E x8 ........................................ 35
3.9 R118: Riser card for PCI-E x8 add-on card .................................................. 35
Chapter 4. BIOS Setup ...................................................................................... 36
4.1 Quick Setup ................................................................................................. 36
4.2 Entering the CMOS Setup Program ............................................................. 37
4.3 Menu Options .............................................................................................. 39
4.4 Advanced Menu........................................................................................... 40
4.5 Boot Menu................................................................................................... 50
4.6 Security Menu ............................................................................................. 56
4.7 Chipset Menu .............................................................................................. 58
4.8 Exit Menu .................................................................................................. 59
Chapter 5. Utility & Driver Installation.............................................................. 63
5.1 Operation System Supporting ...................................................................... 63
5.2 System Driver Installation............................................................................ 64

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
4
5.3 LAN Driver Installation ............................................................................... 64
Appendix A: Watchdog Timer Programming Guide ........................................... 65
Appendix B: LAN Bypass Programming Guide................................................. 68
Appendix C: Programming the GPIO ................................................................ 82
Appendix D: System Resources......................................................................... 84
Appendix E: Cable Development Kit................................................................. 89

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
5
Chapter 1. General Information
1.1 Introduction
The PL-80230 is a 1U rackmount hardware platform designed for network
service applications. Built with Intel® Embedded IA components with warranty
of product longevity, the PL-80230 supports Intel® Core™2 Duo and Core™2
Quad processors with 800/1066/1333MHz Front Side Bus.
The platform supports two un-buffered and non-ECC DDR3 800/1066MHz
DIMM sockets with memory up to 4GB. In order to provide the best network
performance and best utilization, the powerful storage interfaces include one
3.5" SATA HDD and CompactFlash™. The PL-80230 also supports one mini
PCI socket and one PCI expansion slot.
The platform supports a range of from 6 GbE to a max of 14 GbE Ethernet
ports from the front-panel. The front panel also has dual USB 2.0 ports, one
RJ-45 console port and LED indicators that monitor power and storage device
activities for local system management, maintenance and diagnostics. In
addition, the PL-80230 is RoHS, FCC and CE compliant.
1.2 Specifications
CPU Intel® Core™2 Quad* , Core™2 Duo,
Pentium dual-core LGA775 processors
Chipset Intel® G41 chipset
Front Side Bus 1333/1066/800MHz FSB
Processor System
BIOS AMISPI BIOS
Technology Un-buffered and non-ECC DDR3
800/1066MHz memory
Memory
Capacity Up to 4GB with 2 DIMM sockets
Expansion Expansion Slots one PCI-E x8 slot* for expansion
Ethernet module
one PCI-E x8 golden finger* for
expansion Ethernet module(via optional
Riser card, R117)
one mini-PCI socket
one PCI slot
* Each of them can’t be used in the

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
6
same time.
Ethernet GbE Ethernet six GbE, Intel 82574L PCI-E x1
with two pairs bypass function (optional)
HDD one internal 3.5” SATA HDD bayStorage
Compact Flash Socket one CompactFlash
TM
Type I/II
USB one External Dual USB2.0I/O
Serial one RJ45 Console port (COM1)
one internal header for second console
(COM2)
Power Supply Watt ATX power supply
Form Factor 1U rack-mount
LCD Module N/A
Keypad N/A
LED two Bypass LEDs (Red)
one HDD LED (Yellow)
one Power LED (Green)
Dimension （ W x D x H ） 435mm (W) x 400mm (D) x 44mm (H)
(17.1” W x 15.8” D x 1.7” H)
Operating Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )
Mechanical and
Environment
Humidity 10 ~ 85% relative humidity,
non-operating, non-condensing
Weight 1pc/CTN, 7.5kgs, 55.5cm(W) x 54cm(D) x 22.5cm(H)
Certification CE/FCC
1.3 Order Information
We offer some accessories for PL-80230 appliance for customer need.
PL-8023A 1U Rackmount platform with support for LGA775 IntelCore™2 Quad,
Core™2 Duo CPU, 6 x RJ45 GbE ports, 2 pairs bypass
PL-8023B 1U Rackmount platform with support for LGA775 IntelCore™2 Quad,
Core™2 Duo CPU, 6 x RJ45 GbE ports
DK001 Cable development kit

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
7
1.4 Packaging
Make sure the following items have been included in the package before
installation.
1. PL-80230 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any of the above items are missing or damaged contact [email protected].
Retain the box and carton for sake shipping or storing. After you unpack the
box inspect the contents to make sure everything is intact. Do not plug in the
power adapter if you find the unit appears damaged.
Note: Keep the PL-80230 in the original packaging until you start installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the PL-80230
appliance or other system components. Electrostatic discharge can easily
damage the PL-80230 appliance.
Do not remove the anti-static packing until you are ready to install the
PL-80230 appliance.
Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the PL-80230 appliance by its edges and avoid touching the
components in it.

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
8
1.6 System Layout
PL-80230 Front Side
CF
CPU DDR3 SocketPower supply
HDD bay
(optional)
PCIe slot for
Ethernet module
Mini PCI
PCI

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
9
1.7 Board Dimensions

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
10
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Locations and Definitions

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
11
Connector Define Connector Define
CN1
FAN Connector(Smart FAN) CN23 USB Pin Header
CN2
FAN Connector CN24 USB0/1 Connector
CN3
FAN Connector(Smart FAN) CN25 COM1 RJ45 Connector
CN4 +12V Power Connector CN26 Giga LAN RJ45 Connector
CN5 ATX Power Connector CN27 Giga LAN RJ45 Connector
CN6 VGA Pin Header CN28 Giga LAN RJ45 Connector
CN7 Power Connector CN29 Giga LAN RJ45 Connector
CN8 GPI Pin Header CN30 Giga LAN RJ45 Connector
CN9 GPO Pin Header CN31 Giga LAN RJ45 Connector
CN10 Parallel Box Header CN32 PCI-E x8 Golden Finger
CN11 LED Header (by GPIO) JP1 Power On Type Control
CN12 SATA Connector JP2 Watchdog or Bypass Select
CN13 SATA Connector JP3 CF Master/Slave
CN15 IDE 44Pin Connector JP4 GPI or H/W Reset select
CN16 KB/MS Pin Header JP5 Clear CMOS
CN17 LPC Connector JP6 LAN1-2 Bypass
CN18 SPI (reserved) JP7 LAN3-4 Bypass
CN19 PS_ON# SW1 GPI or H/W Reset Button
CN20 PCI-E x8 Slot (proprietary) LED1 Front LEDs
CN21 Mini PCI Connector
CN22 COM2 Box Header

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
12
2.2 Connector and Jumper Setting
CN1/CN2/CN3: FAN Connector
Pin Define
1 Ground
2 +12V
3 Speed Detect
CN4: +12V Power Connector
Pin Define
1 Ground
2 Ground
3 +12V
4 +12V
CN5: ATX Power Connector
Pin Define Pin Define
11 +3.3V 1 +3.3V
12 -12V 2 +3.3V
13 Ground 3 Ground
14 PS_ON* 4 +5V
15 Ground 5 Ground

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
13
16 Ground 6 +5V
17 Ground 7 Ground
18 RSVD 8 POWER GOOD
19 +5V 9 5VSB
20 +5V 10 +12V
CN6:VGA Pin Header
Pin Define Pin Define
1 RED 2 GREEN
3 BLUE 4 +5V
5 Ground 6 Ground
7 Ground 8 Ground
9 +5V 10 Ground
11 +5V 12 SDA
13 HSYNC 14 VSYNC
15 SCL 16 NC
CN7: Power Connector
Pin Define
1 +12V
2 GND
3 GND
4 VCC5

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
14
CN8: GPI Pin Header
Pin Define
1 GPI0
2 GPI1
3 GPI2
4 GPI3
5 Ground
CN9 : GPO Pin Header
Pin Define Pin Define
1 GPO4- 2 GPO4+
3 GPO5- 4 GPO5+
5 GPO6- 6 GPO6+
7 GPO7- 8 GPO7+
9 NC 10 NC

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
15
CN10 :Parallel Box Header
Pin Define Pin Define
1 STROBE 14 AUTOFD
2 PD0 15 ERR
3 PD1 16 INT
4 PD2 17 SLCTIN
5 PD3 18 Ground
6 PD4 19 Ground
7 PD5 20 Ground
8 PD6 21 Ground
9 PD7 22 Ground
10 ACK* 23 Ground
11 BUSY 24 Ground
12 PE 25 Ground
13 SLCT 26 Ground
CN11: LED header (Programmable by GPIO)
Pin Define
1 GPIO24
2 GPIO25

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
16
CN12/13:SATA Connector
Pin Define
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
CN15 : IDE 44Pin Connector
Pin Define Pin Define
1
RESET
23
PDIOW#
2 GND 24 GND
3 PDD7 25 PDIOR#
4 PDD8 26 GND
5 PDD6 27 PDIORDY
6 PDD9 28 PRI_PD1
7 PDD5 29 PDACK#
8 PDD10 30 GND
9 PDD4 31 IDEIRQ
10 PDD11 32 NC
11 PDD3 33 PDA1
12 PDD12 34 IDE_CALID#

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
17
13 PDD2 35 PDA0
14 PDD13 36 PDA2
15 PDD1 37 PCS1#
16 PDD14 38 PCS3#
17 PDD0 39 LED
18 PDD15 40 GND
19 GND 41 VCC5
20 NC 42 VCC5
21 PDDREQ 43 GND
22 GND 44 NC
CN16:KB/MS Pin Header
Pin Define Pin Define
1 KCLK 2 MCLK
3 KDAT 4 MDAT
5 NC 6 NC
7 PS2_GND 8 PS2_GND
9 PS2_VCC 10 PS2_VCC

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
18
CN17: LPC Connector
Pin Define Pin Define
1 +3.3V 2 AD 0
3 AD 1 4 AD 2
5 AD 3 6 Frame#
7 PCIERST# 8 +5V
9 CLOCK 10 PME#
11 GND 12
13 SERIRQ 14 LDRQ
CN18: SPI (N/C, reserved for manufactory test)
Pin Define Pin Define
1 VCC3 2 GND
3 SPI_CS0 4 SPI_CLK
5 SPI_MISO 6 SPI_MOSI
7 NC 8 FLASH_IO
CN19: PS_ON#
Short Power on
Open Power off

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
19
CN20: PCIE x8 Slot (proprietary)
Pin Define Pin Define
A1 GND B1 +12V
A2 +12V B2 +12V
A3 +12V B3 +12V
A4 GND B4 GND
A5 VCC3 B5 SMB_CLK_
RESUME
A6 VCC3 B6 SMB_DATA_
RESUME
A7 GND B7 GND
A8 VCC3 B8 VCC3
A9 VCC3 B9 NC
A10 VCC3 B10
VCC3_STBY
A11 RESET B11 PE_WAKE
A12 GND B12 LAN_PWRO
K
A13 PCI_E3_P2 B13 GND
A14 PCI_E3_N2 B14 TX_0_DP
A15 GND B15 TX_0_DN
A16 RX_0_DP B16 GND
A17 RX_0_DN B17 VCC5
A18 GND B18 GND
A19 VCC5 B19 TX_1_DP
A20 GND B20 TX_1_DN
A21 RX_1_DP B21 GND
A22 RX_1_DN B22 GND
A23 GND B23 TX_2_DP
A24 GND B24 TX_2_DN
A25 RX_2_DP B25 GND
A26 RX_2_DN B26 GND
A27 GND B27 TX_3_DP
A28 GND B28 TX_3_DN
A29 RX_3_DP B29 GND

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc. [email protected] www-win-ent.com [phone]
20
A30 RX_3_DN B30 BYPASS
A31 GND B31 GPIO35
A32 GPIO33 B32 GND
A33 GND B33 TX_4_DP
A34 GND B34 TX_4_DN
A35 RX_4_DP B35 GND
A36 RX_4_DN B36 GND
A37 GND B37 TX_5_DP
A38 GND B38 TX_5_DN
A39 RX_5_DP B39 GND
A40 RX_5_DN B40 GND
A41 GND B41 TX_6_DP
A42 GND B42 TX_6_DN
A43 RX_6_DP B43 GND
A44 RX_6_DN B44 GND
A45 GND B45 TX_7_DP
A46 GND B46 TX_7_DN
A47 RX_7_DP B47 GND
A48 RX_7_DN B48 NC
A49 GND B49 GND
CN22 :COM2 Box Header
Pin Define Pin Define
1 DCD# 6 DSR#
2 RXD# 7 RTS#
3 TXD# 8 CTS#
4 DTR# 9 RI#
5 Ground 10 NC