Wincor Nixdorf BEETLE User manual

BEETLE /iPOS plus
All-in-one POS System
User Manual

We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Wincor Nixdorf International GmbH
Technical Documentation R&D SAT36
Wohlrabedamm 31
D-13629 Berlin
E-Mail: [e-mail]
Order No.: 01750245230A
Your opinion:

BEETLE /iPOS plus
All-in-one POS System
User Manual
Edition August 2013

All brand and product names mentioned in this document are trademarks of their
respective owners.
Copyright © Wincor Nixdorf International GmbH, 2013
The reproduction, transmission or use of this document or its contents is not permitted without
express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or
design, are reserved.
Delivery subject to availability; technical modifications possible.

Contents
Manufacturer´s Certification..........................................................1
FCC-Class A Declaration ..................................................................... 1
Important Notes ................................................................................ 1
Safety Notes....................................................................................... 2
Introduction...................................................................................4
About This Manual............................................................................. 4
Care of the BEETLE /iPOS plus ........................................................... 5
Recycling the BEETLE /iPOS plus........................................................ 5
Warranty............................................................................................ 6
Before Switching On the System ....................................................7
Unpacking and Checking the System................................................. 7
Basic Settings ..................................................................................... 8
Components....................................................................................... 8
Processor Type .............................................................................. 8
RAM............................................................................................... 8
Hard Disk Options.......................................................................... 8
Display ........................................................................................... 8
Setting Up the Device.....................................................................9
Ergonomic Terminal Workplace......................................................... 9
Overview ..................................................................................... 11
Front Side View: Wall Fastening ...................................................... 11
Front Side View: Device with Monitor Stand................................... 12
Back Side View ................................................................................. 13
AC Power Adapter............................................................................ 14
Projected Capacitive Touch Screen .............................................. 15
General Information ........................................................................ 15
Instructions for Using the Touch Screen.......................................... 15
Brightness ........................................................................................ 16
LEDs.................................................................................................. 16
Cleaning Instructions ....................................................................... 17
Cabling the BEETLE /iPOS plus...................................................... 18

Connector Panels System Unit .....................................................22
Jack Plug 3.5 mm (OUT)...............................................................23
RJ12 (CASHDR).............................................................................23
RJ45 (LAN)....................................................................................23
USB (Universal Serial Bus)- A .......................................................24
P-USB (Powered USB) 12V...........................................................24
CRT...............................................................................................24
D- Sub- Jack Power Supplied (COM1*/COM2*) ..........................24
Disconnecting Cables....................................................................25
Storage Media..............................................................................27
Change Of the Hard Disk Drive.........................................................27
Magnetic Swipe Card Reader (option)..........................................31
How to Operate................................................................................31
Cleaning Instructions........................................................................32
Magnetic Swipe Card Reader: Installation .......................................32
Fingerprint Reader (option)..........................................................35
Waiter Lock (option) ....................................................................36
Customer Display (option)............................................................37
Cleaning Instructions........................................................................38
Customer Display Installation ..........................................................38
Starting Up the System.................................................................41
Appendix......................................................................................43
Technical Data..................................................................................43
Interfaces (J2)...................................................................................44
AC Power Adapter............................................................................44
Power Cable Selection......................................................................45
Capacity of External I/O Ports ..........................................................45
Total Current Consumption Of Interfaces........................................46
Wall-Mounting .................................................................................47
UEFI BIOS Setup ...........................................................................49
Standard UEFI BIOS Version .............................................................49
BIOS Menu Bar .................................................................................50
Legend Screen ..................................................................................50
General Help ....................................................................................51
Scroll Bar ..........................................................................................51
Sub-Menu.........................................................................................51

Main Menu ...................................................................................... 52
System Date [XX/XX/XXXX].......................................................... 52
System Time [XX: XX: XX]............................................................. 52
Advanced Menu............................................................................... 52
Sub Menu ACPI Settings .......................................................... 53
Sub Menu RTC Wake Settings ................................................. 53
Wake-on Modes .......................................................................... 54
Sub Menu CPU Configuration.................................................. 54
Sub Menu IDE Configuration................................................... 55
Sub Menu USB Configuration.................................................. 55
Sub Menu Super I/O Configuration......................................... 56
Sub Menu Super I/O Configuration Serial Port 1 ................ 57
Sub Menu Super I/O Configuration Serial Port 2 ................ 57
Sub Menu Super I/O Configuration Serial Port 3 ................ 57
Sub Menu Super I/O Configuration Serial Port 4 ................ 57
Sub Menu Super I/O Configuration Serial Port 5 ................ 58
Sub Menu Super I/O Configuration Serial Port 6 ................ 58
Sub Menu H/W Monitor.......................................................... 58
Sub Menu PPM Configuration................................................. 59
Sub Menu BIOS Info Menu ...................................................... 59
Chipset Menu................................................................................... 60
Sub Menu Host Bridge............................................................. 60
Sub Menu Host Bridge Intel IGD Configuration .................. 60
Sub Menu South Bridge........................................................... 61
Boot Menu ....................................................................................... 62
Option ROM Messages 3 ............................................................. 62
Security Menu.................................................................................. 64
Administrator Password/User Password..................................... 64
Save & Exit Menu............................................................................. 65
Save Changes and Reset.............................................................. 65
Discard Changes and Reset ......................................................... 65
Restore Defaults.......................................................................... 65
Boot Override.............................................................................. 65
Launch EFI Shell from filesystem device...................................... 66

Test Points Codes .............................................................................66
Checkpoint Ranges...........................................................................66
SEC Phase .........................................................................................66
PEI Phase..........................................................................................67
PEI Beep Codes ............................................................................69
DXE Phase.........................................................................................70
DXE Beep Codes...........................................................................72
Abbreviations...............................................................................73

BEETLE /iPOS plus User Manual 1
Manufacturer´s Certification
The device complies with the requirements of the
EEC directive 2004/108/EC with regard to ‘Electro-
magnetic compatibility" and 2006/95/EC “Low
Voltage Directive” and RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
In addition, the BEETLE /iPOS plus has received the UL
symbol and cUL symbol.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense. Modifications not authorized by the manufacturer may void users
authority to operate this device.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003
du Canada.
Important Notes
The Wincor Nixdorf International GmbH is not responsible for any radio
and television malfunctions which emerge from unauthorized changes in
the device. Make sure that only cables and devices may be connected
which are admitted by Wincor Nixdorf. The user is responsible for any
malfunctions that emerge from the actions mentioned before.

2 BEETLE /iPOS plus User Manual
The device may only be repaired by authorized quali-
fied personnel. Unauthorized opening of the device and
inexpertly carried-out repairs may not only seriously
jeopardize the safety of the user, but also cancel all
warranty and liability agreements.
Expansion cards with electrostatically sensitive devices
(ESD) may be marked with this sticker.
When opening the device or handling modules fitted with ESD, please ob-
serve the following instructions, which pertain to all electrostatic sensitive
devices (ESDs):
Always use the antistatic kit.
Statically discharge yourself, for example by touching an earthed ob-
ject (such as a heat radiator) before beginning to work with ESD-
labeled components.
Likewise, all equipment and tools used in working with such compo-
nents must be free of static charge.
Pull the mains plug before inserting or removing such components.
Only handle such components by their edges.
Never touch any terminal pins of the strip conductors on such compo-
nents.
Safety Notes
The BEETLE /iPOS plus conforms to the current safety standards for data
processing equipment.
If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry before being put into service; an acclimatization
period of at least two hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.

BEETLE /iPOS plus User Manual 3
When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.
Whenever work of any kind is done on the device, as well as when
data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.
To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.
Never plug in or unplug data communication lines during thunder-
storms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off immediately, the power plug disconnected and the Customer
Service of Wincor Nixdorf or your dealer must be notified.
Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guar-
antee a faultless and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3.Thus you can help
to avoid possible mal functions.
If you replace a storage medium, make sure that you only use the stor-
age medium recommended or approved by Wincor Nixdorf.
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org. Other peripheral devices (such as PoweredUSB
printer) should be connected to or disconnected from your BEETLE
system only after the BEETLE has been switched off.

4 BEETLE /iPOS plus User Manual
Introduction
The BEETLE /iPOS plus is an all-in-one POS system which combines an easy
to maintain and modern design with multi-functionality.
The powerful system fulfils all the modern technical and environment-
friendly standards that are required today.
The open architecture of the system makes it possible to use different
operating systems of Windows and Linux. So, whenever you want to ex-
pand your BEETLE /iPOS plus, please contact your Wincor Nixdorf Inter-
national GmbH branch office or your dealer.
About This Manual
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents help you
find the desired information quickly and easily.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s
own selection; therefore, software will not be discussed further in this
manual.
You will find the description of the available peripherals on:
http://www.wincor-
nix-
dorf.com/internet/site_EN/EN/Support/Downloads/POSLotterySystems/M
anuals/manuals_node.html

BEETLE /iPOS plus User Manual 5
Care of the BEETLE /iPOS plus
Clean your BEETLE /iPOS plus housing at regular intervals with a dry, lint-
free cloth. If this does not suffice please use a suitable plastic-surface
cleaner which you can order from Wincor Nixdorf International GmbH.
For more information about cleaning read the chapter “Projective, Capaci-
tive Touch Screen”. When cleaning always make sure that the power plug
is disconnected and that no liquid finds its way into the device.
Recycling the BEETLE /iPOS plus
Environmental protection does not begin when the time has come to dis-
pose of the BEETLE; it begins with the manufacturer. This product was de-
signed according to our internal norm “Environmental conscious product
design and development”.
The BEETLE /iPOS plus system is manufactured without the use of CFC and
CHC and is produced mainly from reusable components and materials.
Please do not stick labels onto plastic case parts. This would help us to re-
use components and material.
But there are still some parts that are not reusable. Wincor Nixdorf Inter-
national GmbH guarantees the environmentally safe disposal of these
parts in a Recycling Center, which is certified pursuant to ISO 9001 and ISO
14001.
You can protect our environment by only switching on your equipment
when it is actually needed. If possible, even avoid the stand-by-mode as
this wastes energy, too. Also switch your equipment off when you take a
longer break or finish your work.
Please contact your competent branch or the Recycling Center Paderborn
(for European countries) for information on how to return and reuse de-
vices and disposable materials under the following mail address.
Email: [e-mail] or on the internet.
We look forward to your mail.

6 BEETLE /iPOS plus User Manual
Warranty
Wincor Nixdorf (WN) generally guarantees a warranty engagement for
12 months beginning with the date of delivery. This warranty engagement
covers all damages which occur despite a normal use of the product.
Damages because of
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the
product,
inadequate location or surroundings
will not be covered by the warranty.
For further information on the stipulation consult your contract.
All parts of the product which are subject to wear and tear are not
included in the warranty engagement. For detailed warranty arrangements
please consult your contract documents.
Please order spare parts at the Wincor Nixdorf customer service.

BEETLE /iPOS plus User Manual 7
Before Switching On the System
Unpacking and Checking the System
Unpack the components and verify that the scope of delivery is identical to
the information on the delivery ticket.
The carton contains the basic unit and a country-specific accessories kit.
Some ordered composition may be installed.
Should you notice any transport damages or discrepancies between pack-
age contents and delivery ticket or functional defects please inform your
contracting parties or the branch office of Wincor Nixdorf immediately.
Please indicate the number of your delivery ticket and delivery ticket
position and serial numbers of the respective devices.
The serial number can be found on the label above the type label located
at the rear side of the system (see sample illustration).
Serial Number

8 BEETLE /iPOS plus User Manual
Transport the device only in its original packaging (to protect it against
impact and shock).
Basic Settings
Ex works, the BEETLE /iPOS plus is configured to your order. Additional
peripheral devices are delivered separately, for example the swipe card
reader. The modules must still be mounted to the system.
Components
The BEETLE /iPOS plus configuration can consist of the following
components:
Processor Type
Atom Dual Core Processor
RAM
2GB or 4GB
Hard Disk Options
HDD SATA 2,5“ 160GB or
SSD 2,5“ 32GB, 64GB respective 128GB
Display
15,1“ projected capacitive touch screen

BEETLE /iPOS plus User Manual 9
Setting Up the Device
The BEETLE /iPOS plus was developed for an in-house installation.
The device has a pedestal, but can also be installed on the wall. If the
system is installed on the wall, it is necessary to remove the pedestal
and fix the device with a VESA-mounting.
Set up the BEETLE /iPOS plus system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations,
dust, moisture, heat and strong magnetic fields.
Ergonomic Terminal Workplace
Please observe the following when setting up your terminal workplace:
Avoid direct glaring and
reflective glaring. Use the
screen only in a controlled
luminance surounding.
Install the device with a
viewing direction that is
parallel to the windows.
Avoid reflective glaring
caused by electric light
sources.

10 BEETLE /iPOS plus User Manual
Position the screen within a
preferred and permit ted
range of vision, so that you
can look onto the screen
from above.
30°
30°
40°
0°
Permitted range of vision
Preferred range of vision

BEETLE /iPOS plus User Manual 11
Overview
Front Side View: Wall Fastening

Display
Brightness adjustment, LEDs

Power button

Waiter lock (optional)

Swipecard reader (optional)






12 BEETLE /iPOS plus User Manual
Front Side View: Device with Monitor Stand

Display
Pedestal

Brightness adjustment, LEDs

Power button

Waiter lock (optional)
⑥Swipecard reader (optional)





⑥