wink haus blueMatic EAV User manual

blueMatic EAV
Automatic Locking System with
Motor Operated Opening
Operating Manual
After installation please pass on these instructions
to the end customer. (Disclosure obligation stipula-
ted in the Product Liability Act.)

1
2
3
4
5
6
7
8
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 2
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
This security door locking system complies with the requirements and directives es-
tablished and stipulated by the Council on the Harmonization of Legal Regulations of
Member States regarding Electromagnetic Compatibility (89/336/EEC).
The manufacturer shall hereby certify the conformity of this product and document
such by the CE marking (see Appendix).
Aug. Winkhaus GmbH & Co. KG
Berkeser Straße 6
D-98617 Meiningen
Germany
T [phone]
F [phone]
www.winkhaus.de
The following information and graphic images provided correspond to the current
status of the development and manufacture of this product.
For the purpose of customer satisfaction and operational reliability of the automatic
locking system with motor operated opening , we reserve the right to make changes to
this product without notice.
All information and specications given in this operating manual have been compiled
and reviewed with the utmost care.
Due to the nature of advances in technology, or amendments to legal regulations and
other compulsory changes we do not guarantee the accuracy and completeness of the
contents’ statements. We always appreciate suggestions or comments.
The automatic locking system with motor operated opening can be easily installed, if
these operating instructions and the door specications indicated have been adhered to.
© Aug. Winkhaus GmbH & Co. KG. All rights reserved. Last revised: 02/2011

8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 3
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
Table of contents
1 Important information page 5
1.1 General information page 5
1.2 Intended use page 5
1.3 Use contrary to the intended purpose page 6
1.4 Explanation of symbols page 7
1.5 Important safety information page 7
1.6 Abbreviations/Explanations page 8
2 Product description page 9
3 Installation page 18
3.1 Routing details page 18
3.2 Cable transition KÜ-T-STV (plug-in) page 19
3.3 Installations page 22
3.3.1 General connection diagram page 23
3.4 Access control system transponder set page 24
3.5 Access control system wireless remote control page 26
3.5.1 Wireless remote control set page 26
3.5.2 Wireless receiver (separate) page 28
3.6 Non-Winkhaus access control system page 30
3.6.1 Non-Winkhaus access control system general page 30
3.6.2 Non-Winkhaus access control system finger sanner
ekey home integra page 30
3.6.2.1 Control of additional applications (only integra 2) page 32
3.6.2.2 Control of automatic door opener (integra 1 and 2) page 32

1
2
3
4
5
6
7
8
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 4
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
4 Operation/Programming page 33
4.1 blueMatic EAV page 33
4.1.1 Locking and unlocking page 33
4.2 blueMatic EAV with transponder page 33
4.2.1 Operation page 33
4.2.2 Programming page 34
4.3 blueMatic EAV with wireless remote control page 36
4.3.1 Operation page 36
4.3.2 Programming page 36
4.4 Wireless receiver for additional applications
(e. g. garage door control units) page 40
5 Maintenance and care page 41
6 Errors/Causes/Troubleshooting page 42
7 Technical specifications page 43
7.1 Power supply page 43
7.2 Antenna/Reader unit page 44
7.3 Wireless remote control page 44
7.4 Cable transition KÜ-T ... page 45
8 Accessories page 46
Table of contents

8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 5
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
1 Important information
1.1 General information
Dear Customer,
We would like to thank you for your condence you have put in us by purchasing our
high-quality product.
Please read this operating manual carefully to become acquainted with the installation
and use of this security door locking system and to avoid malfunctions and safety
hazards.
Acceptance class A
„Acceptance-No.: M105301“
1.2 Intended use
The automatic locking system with motor operated opening and the Winkhaus com-
ponents recommended are suitable for the following areas of application:
• relativeairhumidityofmax.95%
• ambientairtemperatureofbetween-20°Cand+60°C.
The complete door ttings are designed to be used in conjunction with genuine Wink-
haus parts. Other parts which are not recommended by Winkhaus can adversely aect
the default properties of this locking system. It is assumed that the lock will be used
as intended.
The proper functions of the access control systems and the accessories included in the
scope of delivery of the Winkhaus company have been tested. If you use components
made by other companies and if you have any doubts about the suitability of these
components, you will have to contact the respective manufacturer to ensure their t-
ness for use.
To ensure the intended use:
• theinformationandinstructionsrequiredforthispurposehavetobepassedonto
the respective persons;
• onlytrainedprofessionalsshouldinstallthedoorttings,lockingunitsandacces-
sories according to the installation instructions. DIN standards, which may also
apply are to be followed, also.

1
2
3
4
5
6
7
8
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 6
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
The stipulations for use as intended have been met, once the Winkhaus ttings are:
• installedaccordingtotheirdenedfunctionandtheinstallationspecications,
• notusedinanyotherwaythandescribed,
• maintainedandcaredforatregularintervalsasinstructed,and/ordenedsliding
places oil at least 1 x annually (like e.g. chamfer of latch, automatic tracer pin …) if
necessary more frequently,
• notusedifsignsofweararedetected,
• repairedbytrainedprofessionalsintheeventofmalfunctions.
The supplier/manufacturer does not accept any liability for personal injury or material
damage caused by incorrect operation or improper use.
1.3 Use contrary to the intended purpose
The locking systems are not designed to absorb or compensate for any movement
changes or in the closing mechanism of the door caused by changes in temperature or
in the structure of the building.
Doors which are used in damp rooms and in environments with aggressive corrosion
related air conditions require special door furniture.
Incorrect use of the locking systems is evident if :
• theinstructionsontheintendedusearenotbeingfollowed;
• theproblem-freeoperationishinderedduetotheinstallationofexternalitemsthat
are not suitable or block the external outside function, the locking system or within
the center keep;
• thelockingsystemorthecenterkeepismanipulatedinsuchawaythatitsdesign,
mode of operation or function is changed;
• thedoorisdrilledthroughintheareaofthelockhousingsorofthelockrodonce
the lock has been installed;
• theadditionalopeningandclosingequipmentorthethrowndeadboltareimpro-
perly used in order to keep the door open;
• forceisusedtodrivethehandlepinthroughthelockspindle;
• thelockingcomponentsarewronglyinstalledoraretamperedwith,e.g.bypainting
over movable parts such as the lock dead bolt or latch;
• thelockingsystemissubjecttoloadswhichexceednormalmanualforceandare
transmitted via the cylinder key;

8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 7
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
• thehandleisnotloadedinthenormalsenseofrotationoraaforceabove150N
is applied onto the handle in the direction of actuation;
• thegapbetweenthedoorframeandsashisincreasedordecreased,whichwould
for instance result from readjusting the hinges or if the door drops;
• auxiliaryliftingtoolsorobjectsareusedtoopenorclosethelock;
• thehandleandthekeyareactuatedsimultaneously;
• thelockislocked/unlockedbyusingimpropertoolsorequipment;
• IncorrectinputvaluesareappliedincontraventionoftheTechnicalspecications.
1.4 Explanation of symbols
Symbols and ags are used to identify important information in this operating manual.
Flags such as DANGER or CAUTION indicate the degree of hazard. Symbols serve to
visually emphasize the message.
It is imperative that you follow the measures listed to avoid hazard to safety!
DANGER!
Danger to life or danger of serious injuries.
CAUTION!
Danger of material damage.
+NOTICE!
Useful information and tips.
ECO-WATCH!
Notices on complying with regulations on environmental protection.
1.5 Important safety information
Safety information described in this section is to be diligently adhered to regarding
the installation and use of this security lock. You must heed to the safety information
provided without exceptions!
• Readtheoperatingmanualandkeepiteasilyaccessibleforfuturereference.After
installing the door pass it on to the end customer.
• Themanufacturershallnotbeheldliablefordamagecausedbyusecontraryto
the intended purpose of the product.

1
2
3
4
5
6
7
8
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 8
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
• Forsecurityreasons,thelockhasbeendesignedtobeusedinconjunctionwithge-
nuine Winkhaus parts. Using other parts may adversely aect the given properties
of the security lock.
• Itmustbeensuredthatthedoorcanbeclosedwithoutanydicultieswiththekey.
• Installation/Repair of electrical equipment requires expertise, thus such work
should only be carried out by a qualied electrician.
• Arbitrary modications, changes or makeshift repairs are not permitted due to
concerns for safety. You must only use genuine Winkhaus parts for replacements.
• Themanufacturer shallonlybeheldliablefor securityrelatedpropertiesofthe
locking system as stipulated within the bounds of statutory regulations, if the ma-
nufacturer himself or another instructed, authorized agent has carried out the
maintenance and service work or made the changes.
• Winkhausshallnotbeliableforanytypeofdamagecausedbyinadequaterepair
or changes made.
1.6 Abbreviations/Explanations
The following terms and abbreviations are used in this manual:
STV Security door lock
AV2 autoLock AV2 (Automatic
locking system)
EAV blueMatic EAV (Automatic
locking system with motor
operated opening)
Handle Door handle
Grt. Set
SB FRA Center keeps – latch/dead
bolt/adjustment plate
M2 with 2 hooks
RS DIN-right-handed
LS DIN-left-handed
mc Surface matt chrome-plated
est stainless steel
gr grey powder coated
Reader Reader unit/control unit of
the transponder set
AC Alternating current
DC Direct current
NO Make contact
NC Break contact
NO-NC Changer contact
ANT/GND Auxiliary antenna/Ground
UP-socket Flush-type box
LED Light emitting diode
PE Ground wire
N Neutral wire
L Phase

8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 9
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
2 Product description
The blueMatic EAV (automatic locking system with motor operated opening) is a state-
of-the-art locking unit for securing and locking entry doors in a contact-free manner.
The hooks can be retracted electrically so as to open the door.
Figure 2-1: blueMatic EAV with accessories
Netzteil/Powersupply
INPUT:100 - 240 V AC; 50/60 Hz
OUTPUT:12 V DC; 2 A
+V -V
+ + - -
NL
In the
external zone
around the
entry door

1
2
3
4
5
6
7
8
Print-no. 250 020 1
02/2011
Operating Manual blueMatic EAV 10
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
*remaining components recommended for use, or should be used alternatively
No. Name Included
in standard
delivery of
the security
lock
MUST!
Man-
datory*
Available
as an ac-
cessory
or as an
option
Supplied
by custo-
mer/not
included in
standard
delivery
1autoLock AV2 (Automatic lo-
cking system STV-AV2-F/U ...)
X X
2Motor housing X X
3Extension keep set/single
keep
X X
4Center keep FRA ... X X
5Cable transition (KÜ-T-STV) X X
5.1 Cable at the sash side 2 m
[2.187 yd] or 3.5 m
[3.829 yd] long, plug for
motor housing included
5.2 Cable for the frame side
4 m [4.374 yd] long
6Power supply 12 V DC/2 A X
7Access control system
(shown: antenna of the trans-
ponder set)
+NOTICE! Only install
the antenna of the transpon-
der set in the external zone
around the entry door!
X
8„Open” button X
9Flush-type box X
10 Handle X