Winmate R15IH3S-MRA3FP User manual

Marine Panel PC
15/ 19/ 24/ 26 PCAP touchscreen,
with Intel 5th ® Generation Core™ i5-5200U 2.2 GHz
ECDIS Series
R15IH3S-MRA3FP
R19IH3S-MRA1FP
W24IH3S-MRA1FP
W26IH3S-MRA1FP
User Manual
Version 1.1

USER MANUAL PREFACE
ii
ECDIS MARINE PANEL PC
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the prior
written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the
described product(s) conveys no license or title under any patent, copyright, or masks
work rights to these products, and make no representations or warranties that these
products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. We make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at
no charge to the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must be properly
packaged in its original packaging to obtain warranty service. If the serial number and
the product shipping data differ by over 30 days, the in-warranty service will be made
according to the shipping date. In the serial numbers the third and fourth two digits give
the year of manufacture, and the fifth digit means the month (e. g., with A for October,
B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.

USER MANUAL PREFACE
ECDIS MARINE PANEL PC
iii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product. Second,
contact with your distributor, sales representative, or our customer service center for
technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day.
We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

USER MANUAL PREFACE
iv
ECDIS MARINE PANEL PC
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information
or to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique
grave à la terre incorrecte.

USER MANUAL PREFACE
ECDIS MARINE PANEL PC
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while
the power is on. Sensitive electronic components can be damaged by
sudden power surges. Only experienced electronics personnel should
open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement
du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique.
Toujours utiliser un bracelet de mise à la terre comme précaution.
Placer toutes les composantes électroniques sur une surface conçue
pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont
pas dans le chassis.

USER MANUAL PREFACE
vi
ECDIS MARINE PANEL PC
Safety Precautions
For your safety, carefully read all the safety instructions before using the device
and follow all warnings and cautions marked on the product. Keep this user
manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
The openings on the enclosure are for air convection and to protect the
equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the
voltage of the power source is correct.
This product is equipped with a 3-wire grounding type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. (For AC
version only).
Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical
shock.
Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
All cautions and warnings on the equipment should be noted.

USER MANUAL PREFACE
ECDIS MARINE PANEL PC
vii
*Let service personnel to check the equipment in case any of the following
problems appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work
according to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20°C (-4°F) or above 60°C (140°F). It may
damage the equipment.
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de
blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit.
Si vous doutez de leur provenance, contactez le manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap
connected to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the
case or the edge of the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing
connectors or test equipment.
Keep the work area free of non-conductive materials, such as ordinary
plastic assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners
that are conductive.
Always put drivers and PCB’s component side on anti-static foam.

USER MANUAL PREFACE
viii
ECDIS MARINE PANEL PC
Important Information
Countries/ Area
Symbol
This equipment complies with essential requirements
of:
European Union
Electromagnetic Compatibility Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous substances
(RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Internationally
Marine
IEC 60945 4th Edition
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at him own expense.

USER MANUAL PREFACE
ECDIS MARINE PANEL PC
ix
European Union
This equipment is in conformity with the requirement of the following EU legislations
and harmonized standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2004/108/EC)
EN55024: 2010 EN 55022: 2010 Class B
IEC61000-4-2: 2008 EN61000-3-2: 2006+A1: 2009+A2: 2009
IEC61000-4-3: 2006+A1: 2007+A2: 2010 EN61000-3-3: 2013
IEC61000-4-4: 2012
IEC61000-4-5: 2014
IEC61000-4-6: 2013
IEC61000-4-8: 2009
IEC61000-4-11: 2004
Low Voltage Directive (2006/95/EC)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011

USER MANUAL ABOUT THIS USER MANUAL
ABOUT THIS USER MANUAL
This User Manual provides information about the •ECDIS Marine Panel PC. The
documentation set for the ECDIS Marine Panel PC provides information for specific user
needs, and includes:
ECDIS Marine Panel PC User Manual –contains detailed description on how to use
the HMI device, its components and features.
ECDIS Marine Panel PC Quick Start Guide –- describes how to get the Panel PC up
and running.
NOTE:
Some pictures in this guide are samples and can differ from actual product
Revision History
Version
Date
Note
1.0
21-Jun-2015
Initial release
1.1
20-June-2016
Added:
User Manual part number;
ECDIS DAY, DUSK, and NIGHT mode switching
instructions;
Driver Installations;
BIOS Instruction;
Dimensions;
Product Specifications.
Revised:
Format.

USER MANUAL CONTENTS
ECDIS MARINE PANEL PC
i
CONTENTS
PREFACE......................................................................................................................... ii
ABOUT THIS USER MANUAL............................................................................................. i
CHAPTER 1: INTRODUCTION ........................................................................................... 2
1.1 Product Features..............................................................................................3
1.2 Packing List............................................................................................................. 4
1.3 Appearance............................................................................................................5
1.3.1 Front View ...................................................................................................5
1.3.2 Rear, Side, Bottom and Top View................................................................ 7
1.4 Dimensions...........................................................................................................10
CHAPTER 2: MOUNTING ................................................................................................13
2.1 Cable Mounting Considerations ..........................................................................13
2.2 Safety Precautions ...............................................................................................14
2.3 Mounting Guide...................................................................................................15
2.3.1 Panel Mounting .........................................................................................15
2.3.2 VESA Mounting.......................................................................................... 17
CHAPTER 3: GETTING STARTED ......................................................................................19
3.1 Powering On......................................................................................................... 19
3.1.1 AC Adapter Components...........................................................................19
3.1.2 Connecting the Power...............................................................................20
3.2 Connector Description .........................................................................................22
3.2.1 DC Input Connector...................................................................................22
3.2.2 COM1 Serial Port Connector .....................................................................22
3.2.3 USB 3.0 and USB 2.0 Connector ................................................................23
3.2.4 HDMI Connector........................................................................................23
3.2.5 LAN (RJ45) Connector................................................................................ 23
3.2.6 Digital Input / Output Connector (Optional).............................................24
3.2.7 NMEA 0183 Port (Optional)....................................................................... 24
3.3 Installing 2.5" Removable HDD............................................................................25
3.4 Turning On ...........................................................................................................26
3.5 Turning Off ...........................................................................................................26
CHAPTER 4: OPERATING THE DEVICE..............................................................................28

USER MANUAL CHAPTER 2 MOUNTING
ii
ECDIS MARINE PANEL PC
4.1 Hot Tab Introduction............................................................................................ 28
4.1.1 Installing Touch Key Hot Tab Control Utility ............................................. 28
4.1.2 Hot Tab Main Menu .................................................................................. 29
CHAPTER 5: DRIVER INSTALLATION................................................................................44
5.1 Chipset Driver.......................................................................................................44
5.2 Graphics Driver ....................................................................................................47
5.3 Audio Driver .........................................................................................................50
5.4 Ethernet Driver .................................................................................................... 52
5.5 Fintek COM Port Driver........................................................................................55
5.6 Intel® Management Engine Software .................................................................. 58
5.7 USB 3.0 Driver Installation (Windows 7).............................................................. 61
CHAPTER 6: BIOS SETUP.................................................................................................66
6.1 When and How to Use BIOS Setup ......................................................................66
6.2 BIOS Functions .....................................................................................................67
6.2.1 Main Menu ................................................................................................68
6.2.2 Advanced Settings .....................................................................................69
6.2.3 Boot Menu................................................................................................. 89
6.2.4 Security Menu ...........................................................................................91
6.2.5 Save & Exit.................................................................................................92
6.3 Using Recovery Wizard to Restore Computer .....................................................94
CHAPTER 7: TECHNICAL SUPPORT ..................................................................................97
7.1 Introduction .........................................................................................................97
7.2 Problem Report Form ..........................................................................................98
APPENDIX A: PRODUCT SPECIFICATIONS......................................................................100
APPENDIX B: PCAP TOUCHSCREEN...............................................................................103

USER MANUAL CHAPTER 1 INTRODUCTION
ECDIS MARINE PANEL PC
1
INTRODUCTION
This chapter gives you product overview,
describes features and hardware specification.
You will find all accessories that come with your
device in the packing list. Mechanical dimensions
and drawings included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION
2
ECDIS MARINE PANEL PC
CHAPTER 1: INTRODUCTION
Modern marine sector requires durable devices that can withstand long periods submersed
in water. Winmate ECDIS Marine Series Panel PC is suitable for navigation, ship automation,
and surveillance, rugged industrial and light military applications.. Flat surface is easy-to-
clean and delivers aesthetically pleasing look. Due to dimmable backlight the Panel PC
suitable for high and low ambient light conditions. You can mount the Panel PC on the
bridge of a ship.
The device powered by Intel 5th ® Generation Core TM i5-5200U 2.2GHz processor and
supports various Windows-based operating systems: Windows 10 IoT Enterprise, Windows
Embedded 8.1 Industry PRO, Windows Embedded 8 Std, Windows Embedded Std. 7, and
Windows 7 PRO for Embedded System. The Panel PC features user-friendly and resistant to
scratches PCAP touch-screen. These models sealed with front IP 65 dust and water proof,
and full IP44 protected from solid objects greater than 1 mm and water splash from all
directions. All connectors are M12 type and ensure durability during maritime operations.
All ECDIS Marine Series Panel PC meet the requirements of industrial marine standards,
including IEC60945 4th Edition, DNV2.4, IACS E10.

USER MANUAL CHAPTER 1 INTRODUCTION
ECDIS MARINE PANEL PC
3
1.1 Product Features
Winmate ECDIS Series Marine Panel PC offers the following features:
PCAP Touch Screen / Anti-Reflective Glass Protection
We develop highly compatible mechanical design for each type. You can choose either
PCAP touch screen or anti-reflective glass protection.
Hyper dimming
Our displays use hyper dimming technology that can control backlight brightness linearly
from nearly 0% to 100% by a capacitive touch key front side. In the night vision it is very
suitable for marine applications.
Edge-to-edge narrow aluminum bezel
Anodized aluminum bezel ensures the anti-corrosion proof in harsh conditions.
Wide Voltage Range Power Input
For marine and transportation sectors wide voltage range from 9 to 36V input with
1.5KV isolation protection is crucial to provide stable power supply in unsteady
environments (Note: 24V is the only voltage approved by DNV certification).
Capacitive touch keys for quick function access and display control
Five capacitive touch keys (ECDIS DAY, DUSK, and NIGHT mode switching) on the front
panel provide convenient operation control over the device.
Capacitive touch key lock / touchscreen lock function
Do not let any unexpected movements to control the whole system. Simply lock the
touchscreen while not in use.
International Maritime Certification Approval
Flat PCAP Marine series obtain numbers of certifications, including DNV2.4, IEC60945
4th, IACS-E10 and ECDIS color calibration compliance.
Customize your marine products
Our rich experience in designing products for some of the most challenging
environments allows us to provide flexible and tailor-made solutions for any
requirements. If you need different panel characteristics, mechanical designs, or
electronic component, contact Winmate Inc.
Approved Marine Panel PC
Winmate’s Marine product line designed to follow IEC-60945 Maritime Navigation and
Radio-communication Equipment and Systems requirements. Marine Panel PC series line
varies in screen size from 19 inches to 26 inches. By testing for usability in a ship’s
wheelhouse during different ambient light conditions we developed products that meet
demands in maritime applications especially for navigation, ship automation and
maritime surveillance.

USER MANUAL CHAPTER 1 INTRODUCTION
4
ECDIS MARINE PANEL PC
1.2 Packing List
Carefully remove the box and unpack your device. Please check if all the items listed below
are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list:
Panel PC
Power Cord
(varies in appearance by
region and country)
AC Adapter*
Driver CD & User Manual
M4 x 12 Black Screw
Bolts**
3-pin Terminal Block
(Phoenix type)
*AC adapter, 3-pin terminal block, and power cord shipped with Panel PC for testing
purposes only.
**Notice: Only to be used to screw the display into a console from the rear side. If you prefer
your own bolts, please make sure to use M4 and 30mm in length.
Package may include optional accessories based on your order.
Four 5-pin Terminal Block
3.81
(Phoenix Type)
*For NMEA port

USER MANUAL CHAPTER 1 INTRODUCTION
ECDIS MARINE PANEL PC
5
1.3 Appearance
1.3.1 Front View

USER MANUAL CHAPTER 1 INTRODUCTION
6
ECDIS MARINE PANEL PC
Capacitive Touch Keys
Touch Key
Function
Description
Power
Power on/off control
Brightness/Volume
To increase brightness of panel
/To increase Volume
Brightness/Volume
To decrease brightness of panel
/To decrease Volume
Menu
Switch to Metro or Desktop
Function Key
Default setting: ECDIS Mode
Switching ECDIS standard range mode
(Day / Dust / Night mode)
*If you don’t need ECDIS Mode, you can
assign other function to Function Key