Winmate R10IBWS-MHT2 User manual

M-Series HMI
10.4” P-cap touchscreen
Intel ®Celeron™Bay Trail-M N2930 1.83 GHz processor
Multifunctional Design
R10IBWS-MHT2
User Manual
Version 1.2
Document Part Number: 9152111I100Q

M-Series HMI
ii
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described product(s)
conveys no license or title under any patent, copyright, or masks work rights to these
products, and make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We make no
representation or guarantee that such application will be suitable for the specified use
without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer discovers
a defect, we will, at his/her option, repair or replace the defective product at no charge to the
customer, provide it is returned during the warranty period of one year, with transportation
charges prepaid. The returned product must be properly packaged in its original packaging to
obtain warranty service. If the serial number and the product shipping data differ by over 30
days, the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth digit
means the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

M-Series HMI
iii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

M-Series HMI
iv
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to avoid the
potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et explique
comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical hazards and
how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the potential
risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à
la terre incorrecte.

M-Series HMI
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is on.
Sensitive electronic components can be damaged by sudden power surges.
Only experienced electronics personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation
est présente. Des composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement du personnel
expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the CPU
card. Modern electronic devices are very sensitive to static electric charges. As
a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge statique
avant de toucher la carte CPU. Les équipements électroniques moderns sont
très sensibles aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou dans un sac
anti-statique lorsqu’elles ne sont pas dans le chassis.
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this user
manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment and must
be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The openings on the enclosure are for air convection and to protect the equipment from
overheating.

M-Series HMI
vi
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following problems
appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work according
to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de
blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in doubt,
please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous
doutez de leur provenance, contactez le manufacturier.

M-Series HMI
vii
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge
pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap
connected to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the case or
the edge of the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or test
equipment.
Keep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that
are conductive.
Always put drivers and PCB’s component side on anti-static foam.

M-Series HMI
viii
Important Information
Countries/ Area
Symbol
This equipment complies with essential requirements of:
European Union
Electromagnetic Compatibility Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous substances
(RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at him own expense.

M-Series HMI
ix
European Union
This equipment is in conformity with the requirement of the following EU legislations and
harmonized standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010 EN 55022: 2010 Class B
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2013
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55022: 2010/AC:2011
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

M-Series HMI
x
About This User Manual
This User Manual provides information about using the Winmate® 10.4” M-Series HMI. The
documentation set for the M -Series HMI provides information for specific user needs, and includes:
M-Series HMI User Manual –contains detailed description on how to use the HMI, its
components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version
Date
Note
Author
1.0
21-Mar-2016
Initial release
Raven Hsu
1.1
13-Jun-2016
Change 10.4” panel spec and model
name: R10IBWS-MHP1 > R10IBWST2
Raven Hsu
1.2
12-Jul-2016
Modify mounting solutions
Raven Hsu

M-Series HMI
xi
Contents
Preface ........................................................................................................................................ii
About This User Manual...............................................................................................................x
1 Introduction............................................................................................................................14
1.1 Product Features................................................................................................................14
1.2 Hardware Specifications ....................................................................................................15
1.3 Software Support...............................................................................................................16
1.4 Packing List.........................................................................................................................17
1.5 I/O Layout ..........................................................................................................................18
1.6 OSD Panel...........................................................................................................................19
1.6 Dimensions.........................................................................................................................20
2 Getting Started........................................................................................................................22
2.1 Powering On.......................................................................................................................22
2.1.1 AC Adapter Components.........................................................................................22
2.1.2 Power Considerations .............................................................................................23
2.1.3 Connecting the Power.............................................................................................23
2.2 Connector Pinouts .............................................................................................................25
2.2.1 DC-in Isolated Connector ........................................................................................25
2.2.2 COM Serial Port Connector .....................................................................................25
2.2.3 USB 2.0 Connector...................................................................................................25
2.2.4 USB 3.0 Connector...................................................................................................26
2.2.4 HDMI Connector......................................................................................................26
2.2.5 LAN (RJ45) Connector..............................................................................................26
2.3 Turning On and Off ............................................................................................................27
2.4 Configuring Serial Port Settings .........................................................................................28
3 Operating the Device............................................................................................................... 30
3.1 Operating System...............................................................................................................30
3.2 Multi-Touch........................................................................................................................30
3.3 Adjusting the Display Brightness .......................................................................................31
4 Driver Installation ...................................................................................................................33
4.1 Chipset Driver.....................................................................................................................33

M-Series HMI
xii
4.2 Graphics Driver ..................................................................................................................36
4.3 Audio Driver .......................................................................................................................37
4.4 Intel Network Connections ................................................................................................38
4.5 Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8) ..........................................39
4.6 Intel Trusted Engine Interface (Intel TXE) Driver...............................................................40
4.7 USB 3.0 Driver (Windows 7)...............................................................................................41
5 BIOS Setup ..............................................................................................................................43
5.1 When and How to Use BIOS Setup ....................................................................................43
5.2 BIOS Functions ...................................................................................................................43
5.2.1 Main Menu ..............................................................................................................45
5.2.2 Advanced Menu ......................................................................................................46
5.2.3 Chipset Menu ..........................................................................................................63
5.2.4 Security Menu .........................................................................................................64
5.2.5 Boot Configuration ..................................................................................................65
5.2.6 Save & Exit...............................................................................................................67
5.3 Using Recovery Wizard to Restore Computer ...................................................................69
6 Mounting Solutions.................................................................................................................71
6.1 Cable Mounting Considerations ........................................................................................71
6.2 Safety Precautions .............................................................................................................72
6.3 Mounting Guide.................................................................................................................72
6.3.1 VESA Mount.............................................................................................................72
6.3.2 Panel/ Flush Mount .................................................................................................73
7 Technical Support....................................................................................................................75
7.1 Software Developer Support .............................................................................................75
7.1.1 Winmate Download Center.....................................................................................75
7.1.2 Winmate File Share .................................................................................................75
7.2 Problem Report Form ........................................................................................................76

M-Series HMI
13
Introduction
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the HMI device in the
packing list. Mechanical dimensions and
drawings included in this chapter.

User Manual Chapter 1 Introduction
M-Series HMI
14
1 Introduction
Thank you for purchasing Winmate® M-Series HMI. M-Series HMI is designed to provide
versatile and cost-effective solution for your industrial needs. P-cap multi-touch screen
equipped with industrial motherboard offers various input/ output connectors. Intel ®
Celeron ® Bay Trail-M N2930 1.83 GHz processor onboard with fanless cooling system
assures steady performance and silent functioning.
M-Series HMI perfectly fits in applications where total costs of ownership (TCO) and
quick recovery of failure is important. The flexible system design provides easy access
to components and can be serviced by local maintenance team.
Versatile, easy-to-service and compact M-Series HMI is the best solution for industrial
and building automation.
1.1 Product Features
Signature true flat display screen with edge-to-edge design
Aluminum, anti-corrosion treated housing
Superior Sealing with front IP65 protection against dust and water
Projected Capacitive Multi-Touch Screen
Fanless design ensures quiet operation
Fanless cooling system
Support wide range 9~36V isolation DC input
Compact size to fit in confined spaces

User Manual Chapter 1 Introduction
M-Series HMI
15
1.2 Hardware Specifications
Model Name
R10IBWS-MHT2
Display
Size
10.4”
Active Display Area
201.4(H) x 157.8(V)
Pixel Pitch (mm)
0.0685(H) x 0.2055(V)
Display Colors
16.2M
Resolution
1024 x 768
Brightness
350 nits
Contrast Ratio
1200:1 (typ.)
Viewing Angle
88/88/88/88
System
Processor
Intel® Celeron® Bay Trail-M N2930 1.83GHz
System Memory
4GB DDR3L 1066/1333 SODIMM
System Chipset
Intel® ATOM® SoC integrated
Storage
Built-in 64GB mSATA SSD
Ethernet
Dual Intel WG82574L GbE LAN
Audio
Realtek ALC886 codec
Operating System
Optional OS
Windows 10 IoT Enterprise
Windows Embedded 8 Standard
Windows Embedded Standard 7
Input/ Output
Serial Ports
1 x COM1
1 x COM2
1 x COM3 (Optional)
USB Ports
1 x USB 3.0
2 x USB 2.0
Ethernet
2 x Gigabit LAN
HDMI
1 x HDMI Output
Physical Buttons
1 x Power Button
1 x Reset Button
Mechanical Specification
Cooling System
Fanless design
Mounting
Wall mount/ VESA mount
Dimensions (L x W x H)
269.5 x 226 x 65.3

User Manual Chapter 1 Introduction
M-Series HMI
16
Environmental Considerations
Operating Temperature
0 to +50°C
Operating Humidity
30%~95% at 40°C (non-condensing, RH)
IP Rating
Front: IP65
Full: IP20
Power Specifications
Power Input
9-36V isolation DC in
Power Adapter
110-240 AC to 12V DC out 80W
1.3 Software Support
Winmate provides the following drivers for M-Series HMI with Intel ® Celeron Bay Trail-
M N2930 processor:
Item
Driver
Windows 7
Windows 8
Windows 10
1
Chipset Driver
☑
☑
☑
2
Graphics Driver
☑
☑
☑
3
Audio Driver
☑
☑
☑
4
Ethernet Driver
☑
☑
☑
5
Intel Sideband Fabric Device
(Intel MBI) Driver
☒
☑
☑
6
Intel Trusted Engine Interface
(Intel TXE) Driver
☑
☑
☑
7
USB 3.0 Driver
☑
☒
☒
9
Winmate Watchdog Driver
☑
☑
☑

User Manual Chapter 1 Introduction
M-Series HMI
17
1.4 Packing List
Carefully remove the box and unpack your HMI device. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list:
HMI Device
User Manual
(Hardcopy)
Driver CD
Mounting Clips &
Screws
8 pcs
3-pin Terminal
Block
Power Cord
AC Adapter
(12V/ 80W)

User Manual Chapter 1 Introduction
M-Series HMI
18
1.5 I/O Layout
No
Description
No
Description
①
COM 3 (Optional)
⑦
HDMI output
②
COM2
⑧
LAN
③
9-36V isolation DC in
⑨
LAN
④
COM1
⑩
Reset Button
⑤
USB3.0
⑪
Power Button
⑥
USB2.0

User Manual Chapter 1 Introduction
M-Series HMI
19
1.6 OSD Panel
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/
Off
Press to power on or power off the device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity (Data is being read or written)
Off
System is idle

User Manual Chapter 1 Introduction
M-Series HMI
20
1.6 Dimensions
This section contains mechanical drawing of the HMI devices. Notice that this is a
simplified drawing and some components are not marked in detail.
Dimensions 10.4”
Unit: mm