Winmate W07IB3S-PCM1AC-POE User manual

Please read these instructions carefully before using this product, and save this manual for future use.
7” S-Series HMI
W07IB3S-PCM1AC-POE
W07IB3S-PCM1-POE
Quick Start Guide
V1.2
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com

ii
Document Part Number: 9152070I1002

- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two
conditions:
This device may not cause harmful
interference.
This device must accept any interference
received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a class "B" digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at him
own expense.

- 4 -
European Union
Electromagnetic Compatibility Directive
(2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the
following EU legislations and harmonized standards. Product also
complies with the Council directions.

- 5 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical, for
any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of
their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to
any product, including circuits and/or software described or contained
in this manual in order to improve design and/or performance. We
assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or
masks work rights to these products, and make no representations or
warranties that these products are free from patent, copyright, or
mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We
make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be
free from material and workmanship defects for a period of one year
from the invoice date. If the customer discovers a defect, we will, at
his/her option, repair or replace the defective product at no charge to
the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must
be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the
shipping date. In the serial numbers the third and fourth two digits
give the year of manufacture, and the fifth digit means the month (e.
g., with A for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of
year 2016.

- 6 -
Customer Service
We provide a service guide for any problem by the following steps:
First, visit the website of our distributor to find the update information
about the product. Second, contact with your distributor, sales
representative, or our customer service center for technical support if
you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers
every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.

- 7 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden
power surges. Only experienced electronics personnel
should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de
connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement
du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic devices
are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place
all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles
aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface
conçue pour dissiper les charge, ou dans un sac anti-
statique lorsqu’elles ne sont pas dans le chassis.

- 8 -
CONTENTS
INTRODUCTION - 9 -
Features - 9 -
Package Contents - 10 -
Product Overview - 12 -
GETTING STARTED - 13 -
Turning On Your Device - 13 -
Operating the HMI Device - 14 -
Using Front Camera - 17 -
Turning Off Your Device - 22 -
INSTALLATION - 23 -
Wiring Requirements - 23 -
Connecting to Other Devices - 24 -
Mounting - 26 -
SPECIFICATIONS - 32 -
APPENDIX - 34 -
Appendix A: Cleaning the Monitor - 34 -
Appendix B: Winmate Software Development Kit - 35 -

- 9 -
INTRODUCTION
Congratulations on purchasing Winmate® 7” S-Series HMI.
Interactive and smart automation systems of intelligent buildings are
in a fast growing phase. Winmate® multi-touch S-Series HMI is
suitable for home automation and room management systems. Flat
surface is easy-to-clean and delivers aesthetically pleasing look for
any interior. By connecting to centralized database, it can provide real
time update for booking status and available schedule, or perform as
a synchronous display in meetings.
Winmate® 7” S-Series HMI powered by Intel® Celeron® N2930
processor and support Windows 10 IoT, Windows Embedded 8.1
Industry Pro, Windows Embedded 8 Standard, and Windows
Embedded Standard 7 –WS7P operating systems. The HMI device
features P-Cap touch-screen. In addition, the HMI device model
supports an exceptional feature - LED Light Bar. With the help of red,
green, blue and orange LED indicators you can see the status of the
machine or processes afar. It significantly reduces power
consumption by keeping the display turned off.
Features
Winmate® 7” S-Series HMI features:
7”, 1024 x 600 with P-CAP multi-touch
Intel® Celeron® Bay Trail-M N2930 1.83 GHz
Fanless cooling system and ultra-low power consumption
Front IP65 water and dust proof, rear IP22
Dual Gigabit Ethernet
RGB LED status light bar
Optional 2MP front camera
Stylish design for room booking, access control and room
information applications

- 10 -
Package Contents
Carefully remove the box and unpack your device. Please check if all
the items listed below are inside your package. If any of these items
are missing or damaged contact us immediately.
Standard factory shipment list:
7” HMI Device
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
Varies by product
specifications
9152070I1002
IB32: 9171111I101Y
AC Adapter
(12V/ 50W)
Power Cable
VESA Plate
75 x 75 mm
922D050W12VA
Varies by country
82W70J17Y700
VESA Mounting
Screws
913511101145

- 11 -
Package may include optional accessories based on your order:
VESA Desk Stand
PCVS-V1
VESA Desk Stand
LA-100
VESA Wall Mount
Bracket
LA-106
99KK00A0000E
9B0000000128
9B0000000412
Glass Wall Mount Kit
Right: PCGM-V1L
Left: PCGM-V1L
Right: 99KN00A00013
Left:99KN00A00012

- 12 -
Product Overview
No.
Description
No.
Description
󰪦
RJ-45 (LAN)
󰪫
1 Watt Speaker
󰪧
USB 3.0, USB 2.0
󰪬
2MP Front Camera (Optional)
󰪨
RS-232
󰪭
RGB LED Light Bar
(W07IB3S-PCM1AC only)
󰪩
12V DC Terminal
Block
⑨
HF RFID Reader (Optional)
󰪪
RJ-45 (LAN/ PoE)
*Note: RGB LED light bar only available for the model number W07IB3S-
PCM1AC

- 13 -
GETTING STARTED
Turning On Your Device
Follow the following steps to turn on your device:
1. Connect the AC adapter to the DC-in jack connector on the
back side of the HMI device.
2. Connect the power cord to AC adapter.
3. Plug the power cord to the AC outlet and the device will turn on
automatically.
CAUTION
Use only the AC adapter included in your package
(Rating: Output 4.2 A). Using other AC adapters may
damage the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded
AC outlet. Install the additional PE ground wire if the
local installation regulations require it.

- 14 -
Operating the HMI Device
Winmate® 7” S-Series HMI comes with HoT Tab, which allows you to
operate the HMI device.
Hot Tab Menu
To open the Hot Tab menu:
1. Double-click the Hot
Tab icon on the
Windows desktop.
2. The Hot Tab main
menu will appear on the
screen as shown below.
NOTE:
RFID and LED Light Bar are optional features and may not
be present in your model.
Utilities
Utilities category allows automatically
changing orientation from landscape to
portrait mode or rotating the desktop to a
different degree as 0°, 90°, 180°, and 270°.

- 15 -
Brightness
Tap Brightness button to show current brightness level.
To reduce the brightness, drag by touch this icon to the left.
To enhance the brightness, drag by touch this icon to the
right.
Tap Close icon to save the changes and exit the interface.
Volume
Tap Volume button to show current brightness level.
To decrease the volume, drag by touch this icon to the left.
To increase the volume, drag by touch this icon to the right.
Tap Close icon to save the changes and exit the interface.

- 16 -
Testing LED Light Bar
Tap Light Bar to access the LED
light bar control panel, and select
Red / Green / Blue/ Orange color to
be displayed on the LED Bar.
Performance
User can adjust the performance level of the HMI device. There are
four options available:
Extreme
performance
Office Document
High performance
Power Saving
Touch Lock
To LOCK touch screen, double-click the Hot Tab icon on the
Windows desktop, and tap Touch Lock.
To UNLOCK the touch screen, tap button to the right.

- 17 -
Using Front Camera
Your device might have built-in camera based on your order.
Camera Interface
Perform one of the following to open the camera:
1. Press the F1 key.
2. Tap then double-tap to display the HotTab screen.
Select Camera.
No
Item
Description
1
Video
Tap to record videos
2
Photo
Tap to capture photos
3
Settings
Tap to select the destination folder to
save captured photos and videos, enable
preview, and select picture resolution and
quality
4
Close
Tap to close the camera
5
Capture Screen
Shows the object to capture

- 18 -
Shooting Photos
To make a photo:
1. Open the Camera.
2. Focus on the object.
3. Tap to capture the object.
4. By default, the photo preview is displayed briefly on the screen.
The preview screen automatically closes after 3 seconds.
Alternatively, do one of the following:
- Tap to delete the photo and return to the camera screen.
- Tap to close the preview and return to the camera
screen.

- 19 -
Recording Videos
To record a video:
1. Open the Camera.
2. Focus on the object.
3. Tap to record the video. The video recording screen
appears
.
4. Tap to stop recording and return to the camera screen.
5. To playback the video, browse for the video file and play using
a media player application on your device.

- 20 -
Camera Settings
1. Tap to open the setting page
2. Modify necessary settings.