Wittkopp OPTIMA 2648 User manual

Schloss/Lock Optima 2648
© 2012 Carl Wittkopp GmbH •Konrad-Zuse-Straße 5 •D-42551 Velbert •www.carl-wittkopp.com

User’s Manual No. 9999-073-0
page 1
B2648_E.indd Rel. 1 vom 02.03.2009
Carl Wittkopp GmbH
CAWI Key-Operated Lock 2648 Optima
CAWI Key-Operated Lock 2648 Optima
The lock may be operated only with the keys associated with
the particular lock. Inserting and attempting to operate the
lock with any other keys may cause damage.
The key is to be inserted into the lock so that the lowermost
notch, present on only one of the bits, points toward the
bolt.
When the lock secures a door hinged on the right it will be
necessary to rotate the key clockwise to open the lock. Rotate
the key counterclockwise in locks securing doors hinged on
the left. Secure by turning the key in the opposite direction.
The key is captive and can be removed only when the lock
is secured. The key will always have to be turned all the way
to the stop. No excessive force (and no tools) may be used
to turn the key. A qualied service technician will have to be
called in case of malfunction.
cawi locks may be dismantled only by persons who
have been trained by cawi as the guarantee would
otherwise be invalidated.
In the interest of safety, the key should never be left
unattended in the lock. It is also necessary to store the
keys in a secure place and to make them accessible
only to authorized persons. The lock is to be replaced
immediately if a key is lost.
Important note:
The lock requires no maintenance when used in a
residential or ofce environment. It is advisable to have
the lock inspected for security and proper function after
about 10,000 operating cycles. Such inspections are to
be carried out by personnel trained by cawi.
IMPORTANT: Do not use lubricants or any other sub-
stances in the lock.
Installation Dimensions, CAWI Key-Operated Lock
Item 2648 Optima, VdS Class 1
12 mm stroke
25,3
12,5
41
966,5
55 61
49,2
24
7
22
23
15
Ø6,6
4
12
5,5
The aperture in the door of the safe may be a maximum
of 1,5 mm larger than the keyhole, all around its circumference.
breakout segment

Installation Instructions No. 9999-072-0
page 1
E2648_E.indd Rel. 2 vom 02.03.2009
Carl Wittkopp GmbH
Sternbergstraße 5 · 42551 Velbert
fon 02051- 95 66 0 · fax 02051 - 95 66 66
http://www.cawi.com
Carl Wittkopp GmbH
CAWI Key-Operated Lock 2648 Optima
Then use four steel machine screws (M6 or the corresponding
inch threads) to afx the key-operated lock so that it is perma-
nently and securely attached. Prevent spontaneous loosening
of these screws. It is advisable to insert a lock washer under
each of the screw heads. In order to avoid malfunctions, the
mounting screws may be tightened down only to a maximum
torque of 10 Nm.
The bolt may not be subjected to stress or strain after
installation.
The breakout segment in the base of the case may not
be covered by any components.
Do not use lubricants or any other substances in the
lock.
The key-operated lock requires no maintenance when used
in a normal residential or ofce environment. It is advisable
to have the lock inspected for security and proper function
after about 10,000 operating cycles. Such inspections are to
be carried out by personnel trained by cawi.
The manufacturer’s guarantee will be invalidated if these
installation instructions are not observed or if the lock’s case
is opened by personnel not trained by cawi.
Follow these installation instructions when installing
the lock. It should be noted that these installation in-
structions are a part of the VdS security certication;
failure to follow these instructions will invalidate that
certication. The lock is in all cases to be protected
against tampering from the outside.
Installation Dimensions, CAWI Key-operated Lock
Item 2648 Optima, VdS Class 1
12 mm stroke
25,3
12,5
41
966,5
55 61
49,2
24
7
22
23
15
Ø6,6
4
12
5,5
The aperture in the door of the safe may be a maximum
of 1,5 mm larger than the keyhole, all around its circumference.
breakout segment