WOOSIM WSP-DM360 User manual

http://www.woosim.com
MODEL WSP-DM360
(3inch Desktop Mobile Printer)
Rev. 1.0
All specifications are subjected to change without notice.

WSP-DM360 Rev. 1.0
http://www.woosim.com
2
 Copyright
WSP-DM360 3inch desktop printer operator’s manual.
Copyright ⓒ2017 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should turn the printer
“OFF”, before you connect or removed the cable on the rear side, in order to guard the printer
against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”.
 Notice
The contents of this manual are subject to change without notice.

WSP-DM360 Rev. 1.0
http://www.woosim.com
3
 Introduction
The WSP-DM360 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of WSP-DM360 printer are as follows:
Compact size (112.9 X 131.9 X 75.96mm)
Light weight (499.1g) for true mobility.
Very silent printing thru direct thermal printing method.
High speed(80mm/sec, MAX)
High resolution(203dpi : 8dots/mm)
UART(RS-232C) or USB
Bluetooth Ver3.0 or Wireless LAN(IEEE802.11b/g/n) interface
Intuitive LED’s indicate Power(on/off),Error, Battery status
Support Magnetic Stripe Reader [option].
Support Smart Card Module [option]
Support text and graphic printing.
Easier paper loading by CLAMSHELL design.
One touch paper cover
Printer door open & Paper-out sensor
Easier maintenance with self-diagnostics.
In field programming –Update Firmware, Download Fonts and Logos
Microsoft Windows/Windows CE, Linux, Android, iOS compatible
Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.

WSP-DM360 Rev. 1.0
http://www.woosim.com
4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of the printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong electromagnetic fields
such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use other solvent.
●The AC adapter, the battery charger and the battery pack may become warm when in use.
This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time the printer
can be used may be shortened.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

WSP-DM360 Rev. 1.0
http://www.woosim.com
5
CONTENTS
1. Outline ................................................................................................................................................................. 6
1.1. Model classifications .................................................................................................................................. 6
1.2 Symbol.......................................................................................................................................................... 6
1.3. Product Part Number System.................................................................................................................... 7
1.4. Specifications............................................................................................................................................... 8
2. Setting up the printer ......................................................................................................................................10
2.1. Printer & Accessories ................................................................................................................................10
2.2. Printer Features..........................................................................................................................................11
2.3. Dimensions.................................................................................................................................................12
2.4. Replacing the paper roll ...........................................................................................................................13
2.5. Power supply..............................................................................................................................................14
2.5.1. Internal power supply ......................................................................................................................14
2.5.2. Installing the Battery ........................................................................................................................14
2.5.3. Recharging the battery ....................................................................................................................15
2.6. Set operation mode ..................................................................................................................................16
2.6.1. GAP/HOLE SENSOR SETTING..........................................................................................................18
2.7. Memory switch table.................................................................................................................................19
2.7.1. USB Version .......................................................................................................................................19
2.7.2. UART(RS-232C) Version....................................................................................................................20
3. Interface..............................................................................................................................................................21
3.1. UART(RS-232C) or USB .............................................................................................................................21
3.2. Bluetooth ....................................................................................................................................................22
3.3. Wireless LAN ..............................................................................................................................................22
3.4. Read a magnetic stripe card ....................................................................................................................22
3.5. Insert a IC Card..........................................................................................................................................23
4. Using the printer...............................................................................................................................................24
4.1. Control panel..............................................................................................................................................24
4.2. The self test................................................................................................................................................24
5. Consumable Parts.............................................................................................................................................25
5.1. Recommended paper................................................................................................................................25
5.2. Printing position ........................................................................................................................................25
6. Revision History ................................................................................................................................................26

WSP-DM360 Rev. 1.0
http://www.woosim.com
6
1
1. . O Ou ut tl li in ne e
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s
1
1. .2 2 S Sy ym mb bo ol l
Standby symbol
IEC 5009, the standby symbol(line partially within a broken circle),
Indicates a sleep mode or low power state.
Direct current symbol
This symbol is found on many electronic devices that either require or produce
direct current.
WSP-DM360 ( ) ( )
Model
Interface
A1 : UART/Bluetooth
(Standard)
Power
None : DC 8.4V

WSP-DM360 Rev. 1.0
http://www.woosim.com
7
1
1. .3 3. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
Model name / Interface Spec.
Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
3
Wireless LAN
D
RS-485
0
None
E
Parallel
Z
None

WSP-DM360 Rev. 1.0
http://www.woosim.com
8
1
1. .4 4. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item
Specification
Printing method
Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- Font A : 48cpl / Font B : 64cpl / Font C : 72cpl
- KOR, CHN, JPN : 24cpl
Optional Characters
Alphanumeric:95, Extended Graphics:128X31 pages, International:11,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
3-inch (72mm, 576dots)
Printing speed
80mm / sec (MAX)
Dimensions
112.9 X 131.9 X 75.96mm
Weight (w/o paper)
499.1g
Interface
UART(RS-232C) or USB
Bluetooth Ver3.0 or Wireless LAN (IEEE802.11 b/g/n) interface
Paper supplied
Thermal roll paper, Label roll (80mm wide, 60ø)
Barcode supplied
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows, Linux
H/W spec.
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Sensor
Support Cover open, Paper, Label
MSR (option)
Triple tracks (1&2&3 Tracks Reading)
*Supports 3DES & AES encryption
Smart Card Reader
(option)
ISO 7816 Compliant [EMV Level 1/2 Certified] /
T=0, T=1 support 1 SAM [Security Application module]
(Continue…)

WSP-DM360 Rev. 1.0
http://www.woosim.com
9
(Continue…)
Item
Specification
Battery
Rechargeable 7.4V DC, 1800mAh (Li-ion)
Battery duration
1 hour continuous printing
Battery Charger
Input (100~240V AC 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
Environment
Conditions
Temperature
-10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
< Table 1 >

WSP-DM360 Rev. 1.0
http://www.woosim.com
10
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or missing, please contact
your dealer for assistance.
Battery charger adaptor
▼OPTIONAL
Car charger
Thermal roll paper
WSP-DM360
Communication cable
Battery Pack
or