WOOSIM PORTI-P340 User manual

MODEL PORTI-P340
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th, 448,
Gasan-Dong, GeumChun-Ku, Seoul,
Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
All specifications are subjected to change without notice

http://www.woosim.com
2007-10-26
2
All specifications are subjected to change without notice
C
Co op py yr ri ig gh ht t
PORTI-P340 THERMAL PRINTER operator’s manual.
Copyright ⓒ2007 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written permission of
Woosim System Inc.
Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side, in
order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
Notice
The contents of this manual are subject to change without notice.
"Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."

http://www.woosim.com
2007-10-26
3
 Introduction
The PORTI-P340 is an extremely simple and functional thermal printer.
It is the ideal solution for applications which require the immediate printing of data on
a paper, whether they be of an industrial,professional or laboratory nature.
Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground
analyzer, Chemical analyzer, Metallic analyzer, etc.
The general features of PORTI-P340 printer are as follows:
XUltra small size rack mount printer.
XVery silent printing thru direct thermal printing method.
XHigh speed(40mm/sec)
XUART interface
XSupport text and graphic printing.
XSupport bit-image(logo) download.
XEasier paper loading by CLAMSHELL design.
XEasier maintenance with self-diagnostics.
XFlow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.
Note
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 the FCC Rules. These limits are designed to provide reasonable
protection against farmful interference in a residential installation. Thes equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interfrernce to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause farmful interference to radio or television reception , which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
reciver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

http://www.woosim.com
2007-10-26
4

 O Op pe er ra at ti in ng g P Pr re ec ca au ut ti io on ns s
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
XUsing the Printer
●Be careful not to drop or bump the printer on a hard surface.
●Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows :
◆Operating temperature : -10°C to 40 °C
◆Relative humidity : 10% to 90% (no condensation)
●Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
●Do not remove or reinstall the communication cable during
printing or transmission.

http://www.woosim.com
2007-10-26
5
CONTENTS
1. Outline............................................................................................................................................6
1.1. Model classifications .................................................................................................................6
1.2. Product Part Number System.....................................................................................................6
1.3. Specifications ............................................................................................................................7
2. Setting up the printer ....................................................................................................................8
2.1. Printer & Accessories ................................................................................................................8
2.2. Printer Features..........................................................................................................................9
2.3. Installation ...............................................................................................................................10
2.4. Replacing paper roll.................................................................................................................11
2.5. Set operation mode ..................................................................................................................12
2.6. Specified power supply ...........................................................................................................15
3. Interface........................................................................................................................................16
3.1. UART ......................................................................................................................................16
4. Using the printer..........................................................................................................................17
4.1. Control panel ...........................................................................................................................17
4.2. The self test..............................................................................................................................18
5. Consumable Parts........................................................................................................................19
5.1. Recommended paper ...............................................................................................................19
5.2 Printing position .......................................................................................................................19

http://www.woosim.com
2007-10-26
6
1
1. . O Ou ut tl li in ne e
1.1. Model classifications
1.2. Product Part Number System
PORTI–P340 ( ) ( )
Model name
Interface
None : UART
Power
None : DC 9V
Model name / Interface Spec.
Example) 1. PORTI-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. PORTI-SC30 Bluetooth Only Part No. ⇒SC30/Z1
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 3 HPIR
D RS-485 0 None
E Parallel
Z None

http://www.woosim.com
2007-10-26
7
1.3. Specifications
Item Specification
Print method Direct thermal line printing
Characters per line 64cpl (MAX)
Character size Eng. : 9×24dots, 12×24dots Kor. : 16×24dots, [24×24dots]
Resolution 203dpi, 8dots/mm
Print width 3-inch (72mm, 576dots)
Print speed 40mm/sec
Dimension 110 ×77.7 ×48 mm
Weight 300g (including paper roll)
Interface UART
Paper roll Thermal paper roll (80mm wide, 38ø)
Barcodes PDF417(2-dimension), Code128, Code39, I2/5, Code93
UPC, EAN(KAN, JAN), CODABAR
Receive buffer size 10K bytes
Note Printing speed may be slower, depending on the data
transmission speed and the combination of control commands.
Input Power 9VDC, Standby 60mA and Max 3A
Temperature
-10°C ~ 40°C (operating)
-10°C ~ 70°C (storage)
Environment
conditions Humidity
30% - 80% (operating)
10% - 90% (storage)
Mechanical 37,000,000 lines
MCBF (Mean Cycle
Between failure) Head Approximately 50 Km

http://www.woosim.com
2007-10-26
8
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2.1. Printer & Accessories
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
Roll paper
PORTI-P340

http://www.woosim.com
2007-10-26
9
2.2. Printer Features

http://www.woosim.com
2007-10-26
10
2.3. Installation