WOOSIM PORTI-SM40 User manual

http://www.woosim.com
MODEL PORTI-SM40
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(Mobile Printer)

http://www.woosim.com 2
C
Co op py yr ri ig gh ht t
Porti-SM40 Mobile printer operator’s manual.
Copyright ⓒ2008 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
and may not be reproduced in whole or in part without the prior written permission of
Woosim Systems Inc.
Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
Caution
Some semiconductor devices are easily damaged by static electricity.
You should turn the printer “OFF”, before you connect or removed the cable on the
rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
Notice
● The contents of this manual are subject to change without notice.
● Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
●This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
underired operation.

http://www.woosim.com 3
 Introduction
The Porti-SM40 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of Porti-SM40 printer are as follows:
XPocket size(80.5×113.5×46mm)
XLight weight(300g) for true mobility
XVery silent printing thru direct thermal printing method
XHigh speed(80mm/sec, MAX)
XUART(RS-232C or TTL), Bluetooth interface
XSupport Magnetic Stripe Reader & Smart card reader
XSupport Graphic LCD(128×32dots) with Blue LED Backlight
XSupport text and graphic printing
XSupport bit-image(logo), firmware download
XEasier paper roll loading by CLAMSHELL design
XOne touch paper cover
XPrinter door open & Paper-out sensor
XMicrosoft Windows 98/ME/XP/2000 compatible.
XIn field programming – Update Firmware, Download Fonts and Logos
XSupport bit-image(logo) download.
XFlow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.

http://www.woosim.com 4

 O Op pe er ra at ti in ng g P Pr re ec ca au ut ti io on ns s
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
XUsing the Printer
●Be careful not to drop or bump the printer on a hard surface.
●Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
Operating temperature :◆-20°C to 55°C
Relative humidity : 0% to◆95% (No condensation)
●Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
●Do not open the platen cover during printing .
●Do not remove or reinstall the communication cable during printing
or transmission.
●Do not touch the connectors of the communication during printing.
●Switch the POWER OFF when not in use.
●Do not use alcohol or other solvent.
●The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
●When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
XThermal Paper Handling
●Store the thermal paper in a cool, dry and dark place.
●Do not rub the paper with hard object.
●Do not leave the paper with hard object.
●Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
●Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
●Do not use chemical glue.
●Always use the clean thermal paper.

http://www.woosim.com 5
CONTENTS
Copyright .....................................................................................................................................2
Trademark....................................................................................................................................2
Caution.........................................................................................................................................2
Operating Precautions ................................................................................................4
1. Outline. ...........................................................................................................................................7
1.1. Model classifications. ...............................................................................................................7
1.2. Product Part Number System....................................................................................................7
1.3. Specifications............................................................................................................................8
2. Setting up the printer...................................................................................................................10
2.1. Printer & Accessories .............................................................................................................10
2.2. Printer Features.......................................................................................................................11
2.3. Replacing paper roll................................................................................................................13
2.4. Power supply ..........................................................................................................................14
2.4.1. Specified power supply. ...................................................................................................14
2.4.2. Installing the battery ........................................................................................................14
2.4.3. Recharging the battery pack.............................................................................................15
2.5. Set operation mode. ................................................................................................................16
3. Interface........................................................................................................................................19
3.1. UART(RS-232C or TTL)........................................................................................................19
3.2. Bluetooth ................................................................................................................................20
3.2.1 Bluetooth channel organized table....................................................................................20
4. Smart Card Module.....................................................................................................................21
4.1. General Spec...........................................................................................................................21
4.2. Communication Protocol Sequence........................................................................................22
4.2.1. Regular Operation............................................................................................................22
4.2.2. Irregular Operation (Communication Error)....................................................................22
5. Using the printer. .........................................................................................................................23
5.1. Control panel. .........................................................................................................................23
5.2. The self test.............................................................................................................................24

http://www.woosim.com 6
6. Consumable Parts........................................................................................................................25
6.1. Recommended paper...............................................................................................................25
6.2. Printing position......................................................................................................................25

http://www.woosim.com 7
1
1. . O Ou ut tl li in ne e. .
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s. .
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m. .
PORTI–SM40 ( ) ( )
Model
Interface
None: UART/Bluetooth
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 0 None
D RS-485
E Parallel
Z None

http://www.woosim.com 8
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item Specifications
Print method Direct thermal line printing
Characters per line 42cpl (MAX)
Character size Eng. : 9×24dots, 12×24dots Kor. : 16×24dots, [24×24dots]
Optional Characters Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish, Greek,
Japanese, Persian, Latin9 and Others upon request.
Resolution 203dpi, 8dots/mm
Print width 2-inch (48mm, 384dots)
Print speed 80mm / sec (MAX)
Dimension 80.5×113.5×46 mm
Weight 300g (Including battery & roll paper)
Interface UART(RS-232C or TTL) / Bluetooth Ver 2.1 + EDR
Paper roll Thermal roll paper (57mm wide, 40ø)
Barcodes
1-dimension : Code128, EAN 128, Code39, I2/5, Code93 UPC, EAN,
KAN, JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
Memory MCU : 32bit RISC, FLASH : 4 Mbytes, RAM : 8 Mbytes
Receive buffer size 1M bytes
MSR ISO 7810 / 7811 / 7812 1&2 or 2&3 Track Reading
Smart card reader ISO 7816 Compliant (EMV level 1 Certified) /
T=0, T=1 support / 2 SAM (Security Application Module)
LCD 128×32 Dots FSTN (Blue LED Backlight)
Battery Rechargeable 7.4V DC/ 1,100mAh (Li-ion)
Battery duration 1 hour continuous printing
Battery charger Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time

http://www.woosim.com 9
Item Specifications
Environment
conditions
Temperature -20°C ~ 55°C (operating)
Humidity 0% - 95% (operating)
MCBF(Mean Cycle
Between Failure)
Mechanical 37,000,000 lines
Head Approximately 50 Km

http://www.woosim.com 10
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r. .
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
PORTI-SM40
Communication Cable
Battery Charger
Battery Pack
Extra Charger
Paper Roll
▼ OPTIONAL
Car Charger

http://www.woosim.com 11
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
▶Part Name

http://www.woosim.com 12
▶Dimensions

http://www.woosim.com 13
2
2. .3 3. . R Re ep pl la ac ci in ng g p pa ap pe er r r ro ol ll l. .
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover by placing your fingers under the paper cover lock and pull a paper
cover lock open.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
Note : Be sure to use paper rolls that meet the specifications.
Donotusepaperrollsthathave the paper glued to the core because
the printer cannot detect the paper end correctly.

http://www.woosim.com 14
2
2. .4 4. . P Po ow we er r s su up pp pl ly y
2
2. .4 4. .1 1. . S Sp pe ec ci if fi ie ed d p po ow we er r s su up pp pl ly y. .
2
2. .4 4. .2 2. . I In ns st ta al ll li in ng g t th he e b ba at tt te er ry y
①To install battery pack, proceed as follows:
- Insert the Battery pack in the direction of the arrow.
② Reverse the order to remove the battery pack.
③The battery pack install into extra charger.
- Insert the Battery pack in the direction of the arrow.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.
NOTE : ●Before installing or removing the battery pack, ensure the printer is OFF.
●If the printer is not used for long period of time, remove the battery pack
from the printer.
CAUTION : Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

http://www.woosim.com 15
2
2. .4 4. .3 3. . R Re ec ch ha ar rg gi in ng g t th he e b ba at tt te er ry y p pa ac ck k
For recharging the battery pack, install the battery pack in the printer or the extra charger.
Insert the Battery Charger to the charge connector of the printer or the extra charger.
NOTE : ●While charging the printer, turn off the printer power.
●Do not remove the battery during charging.
●The battery is consumable parts and when purchasing, compared to
the use hour is gradually decreases. (Warranty 6 month)
●If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
●The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
●You must use only the supplied adapter.
●Red Lamp : charging the battery.
Green Lamp: charging is finished.

http://www.woosim.com 16
2
2. .5 5. . S Se et t o op pe er ra at ti io on n m mo od de e. .
1. Change the mode and option using the mode Code (Table1).
zMODE button : changing Printer MODE status.
zFEED button : changing OPTION status.
2. [Example] The defaults of the printer are :
UART/ 9600 BPS/8 DATA BIT/ NO Parity/1 STOP BIT/ Density LOW
If a user wants to modify the defaults with
Bluetooth/38400 BPS/7 DATA BIT/Even Parity/2 STOP BIT/Density HIGH
XPress MODE Button until Error Lamp twinkles 5 times.
→You will see present COMMUNICATION mode in the LCD.
→Press the MODE Button two times.
(Theinterfacemode has set to Bluetooth mode.)
XPress FEED button one time.
→You will see present BAUD RATE mode in the LCD.
→Press MODE Button 2 times.
(The baud rate has set to 38,400 bps)
XPress FEED button one time.
→You will see present DATA BIT mode in the LCD.
→Press MODE Button one time.
(The data bit has set to 7 data bit.)
XPress FEED button one time.
→You will see present PARITY BIT mode in the LCD.
→Press MODE Button 2 times.
(The parity bit has set to Even parity bit.)

http://www.woosim.com 17
XPress FEED button one time.
→You will see present STOP BIT mode in the LCD.
→Press MODE Button one time.
(The stop bit has set to 2 stop bit.)
XPress FEED button one time.
→You will see present DENSITY mode in the LCD.
→Press MODE Button two times.
(The density has set to high.)
If all the mode have set, press the FEED Button and the MODE Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth/38,400 BPS/ 7 DATA BIT/Even Parity/ 2 STOP BIT / Density HIGH)
If the status is not correct, please try it again according to the procedure.

http://www.woosim.com 18
Mode No. Printer Mode
(Mode Button) Option No. Option (Feed Button)
1 Communication
Port
1 UART
2 UART (Protocol)
3 Bluetooth
4 Bluetooth (Protocol)
2 Baud Rate
1 9600 bps
2 19200 bps
3 34800 bps
4 57600 bps
5 115200 bps
3 Data Bit 1 7 Data bit
2 8 Data bit
4 Parity Bit
1 No Parity
2 Odd Parity
3 Even Parity
5 Stop Bit 1 1 Stop Bit
2 2 Stop Bit
6 Density
1 Low Density
2 Medium Density
3 High Density
7 Mark 1 No use
2 Use
8 Sensor
1 Sensor Low
2 Sensor Medium 1
3 Sensor Medium 2
4 Sensor High
<Table 1>

http://www.woosim.com 19
3
3. . I In nt te er rf fa ac ce e. .
3
3. .1 1. . U UA AR RT T( (R RS S- -2 23 32 2C C o or r T TT TL L) )
The Porti-SM40 printer has a RS-232C or TTL interface and is connected by means
of a 4 pin mini USB socket. In the following table, the signals present on the Mini-
USB socket are listed:
* Applicable connector : SUNG KYUNG (CM-720)
Pin No. Name Direction Function
1 TxD Output Transmit Data
2 RxD Input Receive Data
3 CTS - -
4 GND - Ground
NOTE : ●When data receiving, when it removes the communication
cable,itlosesadata.

http://www.woosim.com 20
3
3. .2 2. . B Bl lu ue et to oo ot th h
3
3. .2 2. .1 1 B Bl lu ue et to oo ot th h c ch ha an nn ne el l o or rg ga an ni iz ze ed d t ta ab bl le e
Category Specification
Bluetooth Spec. Bluetooth V2.1 / Class2 (10m)
Frequency Range 2.4GHz ISM BAND (2.402~2.480GHz)
Data Transmission Rate 57600bps Fixed.
Data bit 8 Data bit Fixed.
Parity bit No parity Fixed.
Stop bit 1 Stop bit Fixed.
CH MHz CH MHz CH MHz CH MHz CH MHz CH MHz CH MHz CH MHz
1 2402 11 2412 21 2422 31 2432 41 2442 51 2452 61 2462 71 2472
2 2403 12 2413 22 2423 32 2433 42 2443 52 2453 62 2463 72 2473
3 2404 13 2414 23 2424 33 2434 43 2444 53 2454 63 2464 73 2474
4 2405 14 2415 24 2425 34 2435 44 2445 54 2455 64 2465 74 2475
5 2406 15 2416 25 2426 35 2436 45 2446 55 2456 65 2466 75 2476
6 2407 16 2417 26 2427 36 2437 46 2447 56 2457 66 2467 76 2477
7 2408 17 2418 27 2428 37 2438 47 2448 57 2458 67 2468 77 2478
8 2409 18 2419 28 2429 38 2439 48 2449 58 2459 68 2469 78 2479
9 2410 19 2420 29 2430 39 2440 49 2450 59 2460 69 2470 79 2480
10 2411 20 2421 30 2431 40 2441 50 2451 60 2461 70 2471