WOOSIM PORTI-SM40 User manual

http://www.woosim.com
MODEL
PORTI-SM40
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(Mobile Printer)
Rev. 2.0
All specifications are subjected to change without notice

Porti-SM40 Rev. 2.0
http://www.woosim.com
2
¦
Copyright
Porti-SM40Mobile printer operator’s manual.
Copyright ⓒ2008 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
and may not be reproduced in whole or in part without the prior written permission of
Woosim Systems Inc.
¦
Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦
Caution
Some semiconductor devices are easily damaged by static electricity.
You should turn the printer “OFF”, before you connect or removed the cable on the
rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
¦
Notice
●The contents of this manual are subject to change without notice.
●Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
●This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
underived operation.

Porti-SM40 Rev. 2.0
http://www.woosim.com
3
¦
Introduction
The Porti-SM40is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of Porti-SM40 printer are as follows:
uPocket size(80.5×113.5×46mm)
uLight weight(300g) for true mobility
uVery silent printing thru direct thermal printing method
uHigh speed(80mm/sec, MAX)
uHigh resolution(203dpi : 8dots/mm).
uUART(RS-232C or TTL), Bluetooth Ver2.1 + EDR interface
uSupport Magnetic Stripe Reader & Smart card reader
uSupport Graphic LCD(128×32dots) with Blue LED Backlight
uIntuitive LED’s indicate Power(on/off),Error and Battery status
uSupport text and graphic printing
uEasier paper roll loading by CLAMSHELL design
uOne touch paper cover
uPrinter door open & Paper-out sensor
uEasier maintenance with self-diagnostic.
uIn field programming – Update Firmware, Download Fonts and Logos
uFree fall: 1 meter onto concrete (option 1.5 meter)
uMicrosoft Windows 98 / ME / 2000 / XP / VISTA / 7 compatible.
uFlow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.
uAgency Approvals

Porti-SM40 Rev. 2.0
http://www.woosim.com
4
¦
Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
u
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆Operating temperature :-10°C to 50°C
◆Relative humidity : 10% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
●The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
uThermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
● Do not stack the thermal paper with diazo copies immediately after copying or
wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

Porti-SM40 Rev. 2.0
http://www.woosim.com
5
¦
Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception ,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

Porti-SM40 Rev. 2.0
http://www.woosim.com
6
CONTENTS
1. Outline. ...........................................................................................................................................7
1.1. Model classifications. ...............................................................................................................7
1.2. Product Part Number System....................................................................................................7
1.3. Specifications............................................................................................................................8
2. Setting up the printer...................................................................................................................10
2.1. Printer & Accessories..............................................................................................................10
2.2. Printer Features.......................................................................................................................11
2.3. Replacing paper roll................................................................................................................13
2.4. Power supply ..........................................................................................................................14
2.4.1. Specified power supply....................................................................................................14
2.4.2. Installing the battery ........................................................................................................14
2.4.3. Recharging the battery pack.............................................................................................15
2.5. Set operation mode. ................................................................................................................16
3. Interface........................................................................................................................................19
3.1. UART(RS-232C or TTL)........................................................................................................19
3.2. Bluetooth ................................................................................................................................20
4. Smart Card Module.....................................................................................................................21
4.1. General Spec...........................................................................................................................21
4.2. Communication Protocol Sequence........................................................................................22
4.2.1. Regular Operation............................................................................................................22
4.2.2. Irregular Operation (Communication Error)....................................................................22
5. Using the printer. .........................................................................................................................23
5.1. Control panel. .........................................................................................................................23
5.2. The self test.............................................................................................................................24
6. Consumable Parts........................................................................................................................25
6.1. Recommended paper...............................................................................................................25
6.2. Printing position......................................................................................................................25

Porti-SM40 Rev. 2.0
http://www.woosim.com
7
1
1. . O Ou ut tl li in ne e. .
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s. .
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m. .
PORTI–SM40 ( ) ( )
Model
Interface
None: UART/Bluetooth
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒SC30/Z1
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 0 None
D RS-485
E Parallel
Z None

Porti-SM40 Rev. 2.0
http://www.woosim.com
8
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item Specifications
Print method Direct thermal line printing
Characters per line 42cpl (MAX)
Character size Eng. : 9×24dots, 12×24dots Kor. : 16×24dots, [24×24dots]
Optional Characters Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution 203dpi, 8dots/mm
Print width 2-inch (48mm, 384dots)
Print speed 80mm / sec (MAX)
Dimension 80.5×113.5×46 mm
Weight 300g (Including battery & roll paper)
Interface UART(RS-232C or TTL) / Bluetooth Ver 2.1 + EDR
Paper roll Thermal roll paper (57mm wide, 40ø)
Black mark Support black mark detection
Barcodes
1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
H/W Spec. MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size 1M bytes
MSR ISO 7810 / 7811 / 7812 1&2 or 2&3 Track Reading
Smart card reader ISO 7816 Compliant (EMV level 1 Certified) /
T=0, T=1 support / 2 SAM (Security Application Module)
LCD 128×32 Dots FSTN (Blue LED Backlight)
Battery Rechargeable 7.4V DC/ 1,100mAh (Li-ion)
Battery duration 1 hour continuous printing
Battery charger Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
(Continue…)

Porti-SM40 Rev. 2.0
http://www.woosim.com
9
Item Specifications
Environment
conditions
Temperature -10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity 30% - 80% (operating)
10% - 90% (storage)
MCBF(Mean Cycle
Between Failure)
Mechanical 37,000,000 lines
Head Approximately 50 Km
< Table 1 >

Porti-SM40 Rev. 2.0
http://www.woosim.com
10
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r. .
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
PORTI-SM40
Communication cable
Battery charger adaptor
Battery holder
▼
OPTIONAL
Car charger
Battery pack Thermal roll paper

Porti-SM40 Rev. 2.0
http://www.woosim.com
11
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
▶Part Name

Porti-SM40 Rev. 2.0
http://www.woosim.com
12
▶Dimensions

Porti-SM40 Rev. 2.0
http://www.woosim.com
13
2
2. .3 3. . R Re ep pl la ac ci in ng g p pa ap pe er r r ro ol ll l. .
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover by placing your fingers under the paper cover lock and pull a paper
cover lock open.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.

Porti-SM40 Rev. 2.0
http://www.woosim.com
14
2
2. .4 4. . P Po ow we er r s su up pp pl ly y
2
2. .4 4. .1 1. . S Sp pe ec ci if fi ie ed d p po ow we er r s su up pp pl ly y. .
2
2. .4 4. .2 2. . I In ns st ta al ll li in ng g t th he e b ba at tt te er ry y
①To install battery pack, proceed as follows:
- Insert the Battery pack in the direction of the arrow.
② Reverse the order to remove the battery pack.
③The battery pack install into battery holder.
- Insert the battery pack in the direction of the arrow.
NOTE : ●Before installing or removing the battery pack, ensure the printer is
OFF.
● If the printer is not used for long period of time, remove the battery
pack from the printer.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.

Porti-SM40 Rev. 2.0
http://www.woosim.com
15
2
2. .4 4. .3 3. . R Re ec ch ha ar rg gi in ng g t th he e b ba at tt te er ry y p pa ac ck k
For recharging the battery pack, install the battery pack in the printer or the battery holder.
Insert the battery charger adaptor to the charge connector of the printer or the battery holder.
NOTE : ● While charging the printer, turn off the printer power.
● Do not remove the battery during charging.
●The battery is consumable parts and when purchasing, compared to
the use hour is gradually decreases. (Warranty 6 month)
● If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
● The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
● You must use only the supplied adapter.
● Red Lamp : charging the battery.
Green Lamp: charging is finished.

Porti-SM40 Rev. 2.0
http://www.woosim.com
16
2
2. .5 5. . S Se et t o op pe er ra at ti io on n m mo od de e. .
Change the mode and option using the mode Code.
lMODE button : changing Printer MODE status. (Error Lamp)
lFEED button : changing OPTION status.
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low / Mark use
/ Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high
/ Mark no use / Sensor medium1
uPress MODE Button during the Error Lamp flickers 5 times.
→
You will see present COMMUNICATION mode in the LCD.
→
Press the MODE Button twice.
And then, interface mode has set to Bluetooth mode.
uWhen you press FEED button once.
→
You will see present BAUD RATEmode in the LCD.
→
Press MODE Button 3 times.
And then, baudrate has set to 57,600 bps.
uWhen you press FEED button once.
→
You will see present DATA BIT mode in the LCD.
→
Press MODE Button once.
And then Data Bit has set to 7 data bit.
uWhen you press FEED button once.
→
You will see present PARITY mode in the LCD.
→
Press MODE Button once.
And then the Parity bit has set to Odd parity bit.
uWhen you press FEED button once.
→
You will see present STOP BIT mode in the LCD.
→
Press MODE Button once.
And then the density has set to 2 stop bit.

Porti-SM40 Rev. 2.0
http://www.woosim.com
17
uWhen you press FEED button once.
→
You will see present DENSITY mode in the LCD.
→
Press MODE Button twice.
And then the density has set to Density high.
uWhen you press FEED button once.
→
You will see present MARK mode in the LCD.
→
Press MODE Button once.
And then the mark has set to Mark no use.
uWhen you press FEED button once.
→
You will see present SENSOR mode in the LCD.
→
Press MODE Button once.
And then the sensor has set to Sensor medium1.
If all the mode have set, press the MODE Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high / Mark no use
/ Sensor medium1)
If the status is not correct, please try it again according to the procedure.

Porti-SM40 Rev. 2.0
http://www.woosim.com
18
Mode No. Printer Mode
(Mode Button) Option No. Option (Feed Button)
1 Communication
Port
1 UART
2 UART (Protocol)
3 Bluetooth
4 Bluetooth (Protocol)
2 Baud Rate
1 9600 bps
2 19200 bps
3 34800 bps
4 57600 bps
5 115200 bps
3 Data Bit 1 7 Data bit
2 8 Data bit
4 Parity Bit
1 No Parity
2 Odd Parity
3 Even Parity
5 Stop Bit 1 1 Stop Bit
2 2 Stop Bit
6 Density
1 Low Density
2 Medium Density
3 High Density
7 Mark 1 No use
2 Use
8 Sensor
1 Sensor Low
2 Sensor Medium 1
3 Sensor Medium 2
4 Sensor High
< Table 2 >

Porti-SM40 Rev. 2.0
http://www.woosim.com
19
3
3. . I In nt te er rf fa ac ce e. .
3
3. .1 1. . U UA AR RT T( (R RS S- -2 23 32 2C C o or r T TT TL L) )
The Porti-SM40 printer has a UART(RS-232C or TTL) interface and is connected
by means of a 4 pin mini USB socket.
In the following table, the signals present on the Mini- USB socket are listed:
Pin No. Name Direction Function
1 TxD Output Transmit Data
2 RxD Input Receive Data
3 CTS - -
4 GND - Ground
NOTE : ● When data receiving, when it removes the communication
cable, it loses a data.

Porti-SM40 Rev. 2.0
http://www.woosim.com
20
3
3. .2 2. . B Bl lu ue et to oo ot th h
Category Specification
Bluetooth Spec. Bluetooth V2.1 + EDR / Class2 (10m)
Frequency Range 2.4GHz ISM BAND
Data Transmission Rate 57600bps Fixed.
Data bit 8 Data bit Fixed.
Parity bit No parity Fixed.
Stop bit 1 Stop bit Fixed.