WOOSIM WSP-i250 User manual

http://www.woosim.com
MODEL WSP-i250
(2inch Industrial Printer)
Rev. 1.0
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
All specifications are subjected to change without notice

WSP-i250 Rev. 1.0
http://www.woosim.com 2
¦ Copyright
WSP-i250 2inch Industrial printer operator’s manual.
Copyright ⓒ2011 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim
Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
¦ Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦ Caution
Some semiconductor devices are easily damaged by static electricity. You
should turn the printer “OFF”, before you connect or removed the cable on
the rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the
printer “OFF”
¦ Notice
The contents of this manual are subject to change without notice.

WSP-i250 Rev. 1.0
http://www.woosim.com 3
¦
Introduction
The WSP-i250 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile
computing etc.
The general features of WSP-i250 printer are as follows:
uCompact size (92.12×140.56×59.75mm)
uLight weight (406.5g) for true mobility [standard]
uVery silent printing thru direct thermal printing method
uHigh speed (80mm/sec, MAX)
uHigh resolution(203dpi : 8dots/mm).
uUART(RS-232C or TTL), Bluetooth Ver2.1 + EDR, USB[option]
Wireless LAN (IEEE802.11b/g)[option] interface
uSupport Graphic LCD(128×32dots) with Blue LED Backlight
uSupport Magnetic Stripe Reader [option]
uSupport Smart Card Module [option]
uSupport text and graphic printing
uIntutive LED’s indicate Power(on/off), Error
uEasier paper roll loading by CLAMSHELL design
uOne touch paper cover
uPrinter door open & Paper-out sensor
uEasier maintenance with self-diagnostic.
uIn field programming – Update Firmware, Download Fonts and Logos
uWater-resistant construction.( IP54 – Certified )
uMicrosoft Windows XP/VISTA/7/CE/Linux/Android compatible.
uFlow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
uFree fall: 1.5 meter onto concrete
uAgency Approvals

WSP-i250 Rev. 1.0
http://www.woosim.com 4
¦
Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
u
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
●The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
uThermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

WSP-i250 Rev. 1.0
http://www.woosim.com 5
¦
Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception , which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

WSP-i250 Rev. 1.0
http://www.woosim.com 6
CONTENTS
1. Outline. .........................................................................................................................................8
1.1. Model classifications. .......................................................................................................8
1.2 Product Part Number System..........................................................................................8
1.3. Specifications.....................................................................................................................9
2. Setting up the printer.............................................................................................................11
2.1. Printer & Accessories .....................................................................................................11
2.2. Printer Features ...............................................................................................................12
2.3. Dimensions.......................................................................................................................13
2.4. Replacing paper roll........................................................................................................14
2.5. Power supply....................................................................................................................15
2.5.1. Specified power supply.......................................................................................15
2.5.2. Installing the SAM Card and the battery ........................................................15
2.5.3. Recharging the battery pack..............................................................................16
2.6. Set operation mode .......................................................................................................17
2.6.1. GAP/HOLE SENSOR SETTING ............................................................................18
2.7. Confirmation of the Wireless-LAN information........................................................20
2.7.1. MAC Address printing.........................................................................................20
2.7.2. Confirmation of the Wireless-LAN setting information................................20
3. Interface......................................................................................................................................21
3.1. UART(RS-232C or TTL) or USB......................................................................................21
3.2. Bluetooth..........................................................................................................................23
3.3. Wireless LAN....................................................................................................................23
3.4. Card Reading & Smart Card insert..............................................................................24
4. Smart Card Module.................................................................................................................25
4.1. General Spec....................................................................................................................25
4.2. Communication Protocol Sequence............................................................................26
4.2.1. Regular Operation................................................................................................26
4.2.2. Irregular Operation (Communication Error)....................................................26
5. Using the printer......................................................................................................................27

WSP-i250 Rev. 1.0
http://www.woosim.com 7
5.1. Control panel...................................................................................................................27
5.2. The self test......................................................................................................................28
5.3. Using the Accessory.......................................................................................................28
5.3.1. Using the Shoulder strap....................................................................................28
5.3.2. Using the Belt clip ...............................................................................................29
6. Consumable Parts....................................................................................................................30
6.1. Recommended paper. ....................................................................................................30
6.2. Printing position..............................................................................................................30
7. Revision History .......................................................................................................................31

WSP-i250 Rev. 1.0
http://www.woosim.com 8
1
1. . O Ou ut tl li in ne e. .
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s. .
1
1. .2 2 P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
WSP-i250 ( ) ( )
Model
Interface
A1 : UART/Bluetooth
(Standard)
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 3 Wireless LAN
D RS-485 0 None
E Parallel
Z None

WSP-i250 Rev. 1.0
http://www.woosim.com 9
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item Specifications
Print method Direct thermal line printing
Characters per line 42cpl (MAX)
Character size Eng: 9*24dots, 12*24dots Kor: 16*24dots, [24*24dots]
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian,
Tukish, Greek, Japanese, Persian, Latin9 and
Others upon request.
Resolution 203dpi, 8dots/mm
Print width 2-inch (48mm, 384dots)
Print speed 80mm / sec (MAX)
Dimension 92.12 x 140.56 x 59.75mm (Standard)
92.12 x 144.47 x 59.75mm (MSR option)
Weight
(Including battery)
406.5g (Standard)
413.5g (MSR option)
Interface UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR,
USB[option], Wireless LAN interface(IEEE802.11b/g) [option]
Paper roll Thermal roll paper (58mm wide, 50ø)
Barcodes
1-dimension : Code128, Code39, I2/5, Code93
UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix, Micro PDF417,
Truncated PDF417
Driver Microsoft Widows XP / VISTA / 7
Windows CE, Linux, Android OS driver compatible
Black mark Support black mark detection
H/W Spec MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size 1M bytes
MSR [option] ISO 7810 / 7811 / 7812 Triple tracks(1&2&3) Reading
( Continue⋯ )

WSP-i250 Rev. 1.0
http://www.woosim.com 10
Item Specifications
Smart Card Module
[option]
ISO 7816 Compliant (EMV level 1 Certified) /
T=0, T=1 support / 1 SAM (Security Application Module)
LCD 128×32 Dots FSTN (Blue LED Backlight)
Battery Rechargeable 7.4V DC, 1400mAh/1800mAh/2200mAh (Li-ion)
Battery duration 1 hour continuous printing
Battery charger Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
Environment
conditions
Temperature -10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity 30% - 80% (operating)
10% - 90% (storage)
MCBF(Mean Cycle
Between Failure)
Mechanical 37,000,000 lines
Head Approximately 50 Km
< Table 1 >

WSP-i250 Rev. 1.0
http://www.woosim.com 11
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r. .
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or
missing, please contact your dealer for assistance.
WSP-i250
Battery Pack
▼ OPTIONAL
Communication cable
Shoulder strap
MSR
Thermal roll paper
Battery charger adaptor
Belt clip
1 SAM
Smart Card

WSP-i250 Rev. 1.0
http://www.woosim.com 12
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
▶Part Name

WSP-i250 Rev. 1.0
http://www.woosim.com 13
2
2. .3 3. . D Di im me en ns si io on ns s

WSP-i250 Rev. 1.0
http://www.woosim.com 14
2
2. .4 4. . R Re ep pl la ac ci in ng g p pa ap pe er r r ro ol ll l. .
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow
direction like the picture.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because the
printer can not detect the paper end correctly.

WSP-i250 Rev. 1.0
http://www.woosim.com 15
2
2. .5 5. . P Po ow we er r s su up pp pl ly y
2
2. .5 5. .1 1. . S Sp pe ec ci if fi ie ed d p po ow we er r s su up pp pl ly y
2
2. .5 5. .2 2. . I In ns st ta al ll li in ng g t th he e S SA AM M C Ca ar rd d a an nd d t th he e b ba at tt te er ry y
① To install SAM card, proceed as follows:
-Insert the SAM card in the direction of the arrow.
② To install Battery Pack, proceed as follows:
-Insert the Battery Pack in the direction of the arrow.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.
NOTE : ●Before installing or removing the battery pack, ensure the
printer is OFF.
● If the printer is not used for long period of time, remove the battery
pack from the printer.

WSP-i250 Rev. 1.0
http://www.woosim.com 16
2
2. .5 5. .3 3. . R Re ec ch ha ar rg gi in ng g t th he e b ba at tt te er ry y p pa ac ck k
For recharging the battery pack, install the battery pack in the printer.
Insert the Battery Charger to the charge connector of the printer.
NOTE : ● While charging the printer, turn off the printer power.
● Do not remove the battery during charging.
● The battery is consumable parts and when purchasing, compared to
the use hour is gradually decreases. (Warranty 6 month)
● If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
● The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
● You must use only the supplied adapter.
● Red Lamp : charging the battery.
Green Lamp: charging is finished.

WSP-i250 Rev. 1.0
http://www.woosim.com 17
2
2. .6 6. . S Se et t o op pe er ra at ti io on n m mo od de e
In keeping on pressing the Feed and Power button simultaneously until after the ERROR
lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode.
(refer Table 2)
lFEED button : changing Printer MODE status.
lPOWER button : changing OPTION status.
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low /
Quality low / Mark use / Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high /
Quality high/ Mark Gap/Hole / Sensor Auto / Power down no use
uPress MODE & POWER Button during the Error Lamp flickers 5 times.
→
You will see present COMMUNICATION mode in the LCD. (UART)
→
Press the POWER Button twice. And then, interface mode has set to
Bluetoothmode.
uWhen you press FEED button once.
→
You will see present BAUD RATE mode in the LCD. (9600 bps)
→
Press POWER Button 3 times. And then, BAUD RATE has set to 57,600 bps.
uWhen you press FEED button once.
→
You will see present DATA BIT mode in the LCD. (8 Data bit)
→
Press POWER Button once. And then Data Bit has set to 7 DATA BIT.
uWhen you press FEED button once.
→
You will see present PARITY mode in the LCD. (No parity)
→
Press POWER Button once. And then the Parity bit has set to ODD Parity Bit..
uWhen you press FEED button once.
→
You will see present STOP BIT mode in the LCD. (1 stop bit)
→
Press POWER Button once. And then the density has set to 2 Stop bit.

WSP-i250 Rev. 1.0
http://www.woosim.com 18
2
2. .6 6. .1 1. . G GA AP P/ /H HO OL LE E S SE EN NS SO OR R S SE ET TT TI IN NG G
After setting GAP/HOLE of MARK and AUTO of SENSOR, the printer is required to save
the sensing Gap/Hole so please press the buttons by self-test way and keep pressing the
feed-button only and you can see "sensor setting" on LCD after the self-test ends up and
you can finish pressing the feed-button until after passing the 3rd label.
uWhen you press FEED button once.
→
You will see present DENSITY mode in the LCD. (Density low)
→
Press POWER Button twice.And then the density has set to Density high.
uWhen you press FEED button once.
→
You will see present Quality mode in the LCD. (Low)
→
Press POWER Button once. And then the quality has set to Quality high.
uWhen you press FEED button once.
→
You will see present MARK mode in the LCD. (Use)
→
Press POWER Button once. And then the mark has set to Mark Gap/Hole.
uWhen you press FEED button once.
→
You will see present SENSOR mode in the LCD. (Low)
→
Press POWER Button once. And then the sensor has set to
Sensor Auto.
uWhen you press FEED button once.
→
You will see present POWER DOWN mode in the LCD. (5 minutes)
→
Press POWER Button once. And then the Power down has set to
Power down no use.
If all the mode have set, press the POWER Button and the FEED Button
at the same time. After then release the buttons at the same time.
Bluetooth _ 57600bps _ 7 data bit _ Odd parity _ 2 stop bit _ Density high
_ High_ Gap/Hole_ Auto _ No use

WSP-i250 Rev. 1.0
http://www.woosim.com 19
MODE OPTION
Bluetooth WLAN
Communication
Port
UART(RS-232C) UART(RS-232C)
Protocol UART
(RS-232C)
Protocol UART
(RS-232C)
Bluetooth WLAN
Protocol Bluetooth Protocol WLAN
Baud Rate
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Data Bit 7 Data bit
8 Data bit
Parity Bit
No Parity
Odd Parity
Even Parity
Stop Bit 1 Stop bit
2 Stop bit
Density
Density Low
Density Medium
Density High
Quality Low
High
Mark
No use
Use
Gap / Hole
Continue⋯

WSP-i250 Rev. 1.0
http://www.woosim.com 20
2
2. .7 7. . C Co on nf fi ir rm ma at ti io on n o of f t th he e W Wi ir re el le es ss s- -L LA AN N i in nf fo or rm ma at ti io on n
2
2. .7 7. .1 1. . M MA AC C A Ad dd dr re es ss s p pr ri in nt ti in ng g
2
2. .7 7. .2 2. . C Co on nf fi ir rm ma at ti io on n o of f t th he e W Wi ir re el le es ss s- -L LA AN N s se et tt ti in ng g i in nf fo or rm ma at ti io on n
MODE OPTION
Sensor
Low
Medium1
Medium2
High
Auto
Power Down
No use
1 minute
2 minute
3 minute
4 minute
5 minute
< Table 2 >
uMAC address which is set to the printer can be printed out in pressing the Power
and Feed button simultaneously and taking off them shortly after the ERROR lamp
blinks
uPress the Power button in the printer turning on
As the Power lamp turns on, MAC Address is indicated.
uIP Address on LCD is indicated in pressing the Power button once again
uSubnet mask on LCD is indicated in pressing the Power button once again
uGateway IP on LCD is indicated in pressing the Power button once again
uDNS sever IP on LCD is indicated in pressing the Power button once again
※ Since the configuration of Wireless LAN can not be done with the printer in
person, you are required to use the Wireless LAN-setting program which
WOOSIM offers