WOOSIM WSP-CP User manual

http://www.woosim.com
MODEL WSP-CP
(2,3inch Panel Printer with Auto cutter)
Rev. 5.1
All specifications are subjected to change without notice

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
2
All specifications are subjected to change without notice
 Copyright
WSP-CP(261, 281, 361, 381)
2,3inch panel printer(with Auto cutter) operator’s manual.
Copyright ⓒ2017 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written permission of Woosim
Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should turn the printer
“OFF”, before you connect or removed the cable on the rear side, in order to guard the printer
against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
 Notice
The contents of this manual are subject to change without notice.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
3
 Introduction
The WSP-CP is an extremely simple and functional panel printer.
It is the ideal solution for applications which require the immediate printing of data on a
paper, whether they be of an industrial, professional or laboratory nature.
Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground analyzer,
Chemical analyzer, Metallic analyzer, etc.
The general features of WSP-CP printer are as follows:
Very silent printing thru direct thermal printing method.
High speed(200mm/sec-3inch, MAX)
UART(RS-232C or TTL), USB interface.
Auto cutting
Support text and graphic printing.
Intuitive LED’s indicate Power(on/off), Error
Easier paper loading by CLAMSHELL design.
Easier maintenance with self-diagnostic.
One touch paper cover
In field programming –Update Firmware, Download Fonts and Logos
Microsoft Windows/Windows CE, Linux, Android compatible
Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
Agency Approvals

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
4
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong electromagnetic fields such
as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use other solvent.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
5
CONTENTS
1. Outline ................................................................................................................................................................. 6
1.1. Model classifications ..................................................................................................................................... 6
1.2. Product Part Number System....................................................................................................................... 6
1.3. Specifications.................................................................................................................................................. 7
2. Setting up the printer....................................................................................................................................... 9
2.1. Printer & Accessories .................................................................................................................................... 9
2.2. Printer Features.............................................................................................................................................10
2.3. Dimension ...................................................................................................................................................11
2.4. Panel Installation Ⅰ......................................................................................................................................13
2.5. Panel Installation Ⅱ......................................................................................................................................14
2.6. Replacing paper roll .....................................................................................................................................16
2.7. Specified power supply................................................................................................................................16
3. Interface..............................................................................................................................................................17
3.1. UART (RS-232C or TTL) or USB...................................................................................................................17
4. Using the printer...............................................................................................................................................18
4.1. Control panel ................................................................................................................................................18
4.2. The self test...................................................................................................................................................18
5. Consumable Parts.............................................................................................................................................19
5.1. Recommended paper...................................................................................................................................19
5.2 Printing position ............................................................................................................................................19
6. Revision History ................................................................................................................................................20

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
6
1
1. . O Ou ut tl li in ne e
1.1. Model classifications
1.2. Product Part Number System
WSP–CP ( ) ( ) ( )
Model name
Inch&Paper (60Øor 80Ø)
2inch : 261 or 281
3inch : 361 or 381
Interface
A0 : UART / C0 : USB
Power
None : 24VDC, 3A or more
Model name / Interface Spec.
Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
7
1.3. Specifications
Item
Specification
2inch (CP261, CP281)
3inch(CP361, CP381)
Print method
Thermal dot line printing
Characters per line
- Font A, B, C : 32 / 42 / 48cpl
- KOR, CHN, JPN : 16cpl (24cpl)
- Font A, B, C : 48 / 64 / 72cpl
- KOR, CHN, JPN : 24cpl (36cpl)
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Optional Characters
Alphanumeric:95, Extended Graphics:128X50 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
7V : 48mm, 384dots
24V : 54mm, 432dots
72mm, 576dots
Paper roll
58mm (60ø, 80ø)
80mm (60ø, 80ø)
Print speed
7V : 80mm/sec (MAX)
24V : 150mm/sec (MAX)
7V : 80mm/sec (MAX)
24V : 200mm/sec (MAX)
Dimension
261 : 91.1 x 115.2 x 66.6 mm
281 : 91.1 x 136.2 x 90.1 mm
361 : 113.1 x 115.2 x 66.6 mm
381 : 113.1 x 136.2 x 90.1 mm
Weight
(w/o roll paper)
261 : 290g
281 : 331g
361 : 334.6g
381 : 383.5g
Interface
UART(RS-232C or TTL), USB
Barcodes
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows, Linux
H/W spec
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Paper cutting method
Slide cutting
Type of paper cutting
Full cut and Partial cut (1.5±0.5mm tab left at the center)
Input Power
24VDC, 3A or more
(Continue…)

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
8
Item
Specifications
Environment
conditions
Temperature
-10°C ~ 50°C (operating)
-20°C ~ 60°C (storage)
Humidity
30% - 80% (operating)
Life span
(at 25℃ and rated
energy)
Activation pulse
resistance
100 million pulses or more
Abrasion resistance
100km or more (excluding damage caused by
dust and foreign materials)
Paper cutting
resistance
700,000 cuts or more
< Table 1 >

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
9
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2.1. Printer & Accessories
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
Thermal roll paper
WSP-CP261
WSP-CP281
WSP-CP361
WSP-CP381
Bracket
Screw M2.6x5PH
(2EA)

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
10
2.2. Printer Features

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
11
2.3. Dimension
CP261
CP281

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
12
CP361
CP381

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
13
2.4. Panel Installation Ⅰ

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
14
2.5. Panel Installation Ⅱ
Uses BRACKET and fixes, like the picture of difficult case lower part and will be able to fix with
SCREW.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
15

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
16
2.6. Replacing paper roll
2.7. Specified power supply
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like
the picture
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
The following specifications are requested for power supply.
Input : DC 24V / Max 3A or more
Avoid using power supply which its power capacity of power current is extremely high.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because the printer cannot
detect the paper end correctly.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
17
3
3. . I In nt te er rf fa ac ce e
3.1. UART (RS-232C or TTL) or USB
The WSP-CP printer has UART(RS-232C or TTL) or USB interface and power connector is connected
by 8 pin female connector.
In the following table, the signals present on the connector are listed:
WARNING
A wrong connection of power supply connector could be damage the printer.
Pin no.
Signal name
Function
UART
USB
UART
USB
8
INPUT
24VDC / 3A over
7
INPUT
24VDC / 3A over
6
TXD
USB_VCC
Transmit Data
5VDC
5
RXD
DM
Receive Data
Data “-”
4
NC
DP
-
Data “+”
3
GND
Ground
2
GND
Ground
1
GND
Ground
<J4 : MOLEX (53014-0810)>
Mates with : MOLEX 51004-0800 or equivalent.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
18
4
4. . U Us si in ng g t th he e p pr ri in nt te er r
4.1. Control panel
4.2. The self test
BUTTON
- FEED : When the printer is on, paper can be feed manually by pressing
and holding the FEED button for more than one second.
- CUTTER : Paper once cutting.
PANEL LAMP
- Power(Green) : Printer is ON and ready to receive data.
At the time of the reel which will know the shift time of the paper
POWER LAMP blinks.
- Error (Red) : Indicates a fault condition or a printer error.
(details : no paper, paper cover opened. etc.)
Self-Test prints out the current setting value of printer. The way of self-test is as follows.
1. Insert proper paper into the printer.
2. Power on while pressing feed button to start self-test.
3. Printer will print out the current status. (F/W version and set contents)
4. And then pattern of characters will be printed out.
5. Self-test will be finished automatically and turned to the standby status.
※In case printer does not work properly, please contact Woosim customer service center.

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
19
5
5. . C Co on ns su um ma ab bl le e P Pa ar rt ts s
5.1. Recommended paper
5.2 Printing position
Type : Thermal Paper
Paper width : 58mm(2-inch), 80mm(3-inch)
Paper thickness : 60 ±5㎛
Outer diameter : Ø60, Ø80mm or less
Recording side : Outside of roll
▶3Inch
▶2Inch
7V
24V
Cautions
1. Do not paste the paper to the core. And the roll paper which has
Near end mark printing on its near end is recommended.
2. Chemicals or oil may change the color of paper, or printed Characters may fade.
3. Change of paper color starts from approx 70 ℃.
Pay attention to heat, humidity and sun light.
4. Color of paper may be changed by being scratched by nail or hard metal, etc

WSP-CP Rev. 5.1
http://www.woosim.com
2018-08-15
20
6
6. . R Re ev vi is si io on n H Hi is st to or ry y
Date
Version
Comments
Dec. 20. 2010
2.0
Revision History Initial Release
Product weight revision
Nov. 03. 2011
3.0
P13 2.3. Panel Installation Ⅰ
(CP380 dimension correction)
Jun. 16. 2015
4.0
Mechanism RH type
Sep. 18. 2015
5.0
Correct specification
May. 15. 2017
5.1
Change page layout (B5→A4)
* Delete address
Agency Approvals add [CE, FCC KC]