WOPET D01 User manual

WOpet TitBit WiFi Pet Camera
INSTRUCTIONS
D01

【CONTENTS】
………………………………………………………………1
……………………………………………………………3
………………………………………………5
………………………………………………………6
……………………………………7
………………………………………………10
………………………………………………………………………14
……………………………………………………………12
………………………………………………………………………………16
About instructions
Statement of authorization
WOPET at a glance
………………………………………………………………4
WiFi requirements
Scan to download WOpet APP
Log in and select device
Connect your phone, WiFi, and device
Enter interface and use device
Product parameters
Precautions
FAQs
……………………………………………………………………18
FCC warnings
……………………………………………………2

Please read these instructions carefully before use
Thank you for choosing this WOpet intelligent product. In order to
guarantee your personal and material safety, please read these instruc-
tions carefully before using our product. Under no circumstances shall
WOPET be liable to pay compensation or damages to any person for any
loss, injury, or damage, unless it's explicitly stipulated in law, whatsoever
occasioned by this product or as a result of not following the items and
conditions and precautions laid in these instructions.
The authorization of the instructions, trademark and font size are
owned by WOPET and its affiliated party. In case the items and conditions
laid in these instructions are not identical to the actual product (including
the APP), the actual product (APP) shall prevail. WOPET shall, subject to
law, reserve the right to modify items and conditions laid in these
instructions without prior notice, as well as to the final interpretation.
Objection to these instructions, if any, shall be raised in writing by the
customers within 7 (seven) days after purchase. Otherwise, it shall be
assumed that the customer has completely accepted and understood all
terms and conditions of the instructions.
1
About instructions

2
Statement of authorization
This APP (WOpet) shall keep and protect the individual details of all
users; in order to provide more accurate and personalized services, and
co-share the operating right of your equipment. This APP shall be very
careful with this information. Unless otherwise specified in this Statement
of Authorization, this APP shall not disclose this information to any third
party without your permission.
If you have shared authorization with another user, they will have
authorization for such equipment as the camera, photographs,
microphone, etc. If the equipment user has decided to share
authorization, it means they have fully understood the items and
conditions mentioned above, and our company shall not be held
responsible for such consequences as privacy disclosure, disputes,
property and credit losses, etc. Our company reserves the right of
having the final interpretation of this authorization clause and also to
terminate the service agreement with the authorized user immediately.

3
"SET" Button: Quick press to pop a treat, long press for 5 seconds to
restore factory settings.
Note: It’s recommended to use a food size below 15 mm.
WOpet at a glance
Cover
Status Light
HD Camera with
Night Vision
Microphone
USB Port
"SET" Button
& Manual Feeding
Treat Popper
Stabilizing Holder

4
In order to optimize the equipment performance, it's best to use it
within 10m of a WiFi transmitting device, in a barrier-free environment.
WiFi requirements

5
Please download and install the app by searching "WOPET" on
Google Play (Android), or App Store (iOS).
Scan to download WOpet APP
Android iOS

6
Log in your account, and click the sign to select the device to be
link.
Log in and select device
+

7
Long press the button "Set" for 5 seconds. After hearing the beep,
select the mark "O" and click the button "Next".
Connect your phone, WiFi, and device
Connect WiFi and WOpet APP
1
Input the WiFi account number and password connected to the current
device.
This equipment doesn't support the 5G network at present.
Note:
2
a.

8
Use your equipment camera to scan the QR code generated by APP;
after hearing the beep sound select the mark "O" under the QR code and
click the button "Next" to enter the WiFi connection interface.
Connect your phone, WiFi and device
Use device camera to scan QR code
b.

9
In case it's not possible to scan the QR code due to environmental
factors, you can enter the hotspot connecting mode and press the link
under the QR code. If the operation is completed, but no prompt tone
was heard, after entering the hotspot connecting interface, please follow
the interface prompts and complete the connection.
Connect your phone, WiFi and device
Possible causes
c.

10
Enter interface and use device
Setting
Full Screen
Sound
Voice chat
Capture photo
Toss a treat
Record
Gallery
Page Up

11
Operation guide
Press the button in the top right corner of
the tossing food interface to enter the "Set"
interface, then set the relevant items.
Press the button "My" in the bottom right corner
to exit the tossing food interface, and enter the "Set"
interface, then set the relevant items.
In case any issue occurs with this equipment and
you don't understand the specific handling method
at this time, please press the "Service" button and
send your questions to us. We will reply by email
as soon as possible.

12
Product parameters
Press the button in the top right corner of
the tossing food interface to enter the "Set"
interface, then set the relevant items.
Press the button "My" in the bottom right corner
to exit the tossing food interface, and enter the "Set"
interface, then set the relevant items.
Product name: WOpet TitBit WiFi Pet Camera
Product size: 147*147*254mm
Net weight: 1.1 KG
Barn reserves: 0.5L
Product materials: ABS
Camera: 127° HD night vision and wide angle camera.
WiFi band: 2.4G
APP installation requirement: Android5.0/i0S7.0 or above
Adapter parameters:
In case any issue occurs with this equipment and
you don't understand the specific handling method
at this time, please press the "Service" button and
send your questions to us. We will reply by email
as soon as possible.
Input: 110-220V, 50/60HZ, 0.4A
Output: 5.0V, 1000mA

13
Technical specifications of the WOPET intelligent dog camera
Function/ltem Functional
Classifications
Set Button
Red and Green
Indicator Lamp
Trouble Descriptions
WOPET INTELLIGENT DOG CAMERA
1. Quick press (shorter than 1s) to manually pop a treat.
2. In the configuration mode, the green lamp should
flicker slowly (0.5s ON and 0.5s OFF).
3. In the configuration mode, if there's no food in the
grain bucket, quick press (shorter than 1s) and the red
and green lamps will flicker alternately.
4. In the configuration mode or when the network is
connected, long press this button for more than 5s,
reset and scan the QR code after hearing the beep.
After hearing another prompt, the green lamp will
flicker quickly at first, then normally after the network
is connected.
RED LAMP
OFF
OFF
OFF
Slow flickering
GREEN LAMP
Slow flickering
Quick flickering
Normally ON
OFF
STATUS DESCRIPTION
Configurable status
Connecting to the network
The network is connected
No food in the grain bucket,
or the food is blocked.

14
1. Don't pull the power line directly when plugging or unplugging the
adapter.
2. Don't put or insert any foreign matter in this product.
3. It's prohibited to refit or repair the product by yourself.
4. Please use the original power adapter and power line.
5. This product is only for indoor use, please keep it out of direct sunlight.
6. The product only takes dry dog food or snacks, which can be up to
15mm in size.
7. This device is equipped with various kinds of electronic components,
and it is not waterproof. It's not recommended to use this equipment in
a humid environment.
Precautions

15
8. Don't use this product for other purposes than feeding pets.
9. When tossing the dog food or snacks, pay attention to the surrounding
environment. Don't toss treats at human or pet’s eyes.
10. Please clean up the residual dog food or snacks after feeding your
pets, and prevent kids from eating them by mistake.
11. Persons without the suitable capacity for civil conduct, lacking
experience or knowledge (including children), must use, clean
and maintain this product under the supervision and guidance of a
guardian.
12. In case of trouble such as abnormal smell, smoking, or heating,
stop using the product immediately and feel free to contact the customer
service staff.

In case any issue occurs with this equipment and
you don't understand the specific handling method
at this time, please press the "Service" button and
send your questions to us. We will reply by email
as soon as possible.
16
1. When pressing the "Toss a treat" button, the dog food or snack is
tossed two or three times.
Cause: If the sensing lamp doesn't detect the food, it will toss again,
and it can toss up to four times.
2. The APP has displayed the prompt for "Dispense excessive food".
Cause: The snack outlet is blocked by foreign matter. Please
remove the foreign matter in time.
3. The APP has displayed the prompt of "No Food".
Cause: The equipment can't sense any fodder in the grain bucket.
Check if the grain bucket has fodder in it; or if the equipment is
exposed to direct sunlight, please move it to a cool place.
4. It's impossible to continuously watch the video.
Cause: Ensure the power supply to your intelligent equipment is
correct; check the network of your phone and that it is properly
connected.
FAQs

In case any issue occurs with this equipment and
you don't understand the specific handling method
at this time, please press the "Service" button and
send your questions to us. We will reply by email
as soon as possible.
17
5. The user can't enter his/her APP account.
Cause: Firstly, ensure the network is properly connected; secondly,
ensure the account number isn't used by another user at the same time.
Otherwise, we recommend deleting this APP, install it again and try
to log in.
6. If the user wants to change his/her WOPET APP account number, what
should they do?
Cause: Our APP can't be used to directly change the account number.
If you want to change it, please register a new APP account number
through a new email. Then unlink the intelligent equipment from the
original account number, and link it to the new one.
If the user wants to link or unlink the intelligent equipment to the newly
registered account number, long-press the "Set" button for 5s. After
hearing the beep and the green lamp starts slow flickering, scan the QR
Code to link or unlink the intelligent equipment to the new account
number.
NOTE:

18
FCC warnings
WARNING:
Changes or modifications to this unit not expressly approved.
Non-compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.