XYZ Printing da Vinci 1.0 Pro User manual

da Vinci 1.0 Pro
User Manual
ENG
Product Safety
Product Description
Printer screen menu, functions and messages
Functional operations and descriptions
Print
Support Details
Product Model:
da Vinci 1.0 Professional

P 2
V.1.3
da Vinci 1.0 Pro
The purpose of this user manual is to help users understand and use the da Vinci 1.0
Professional 3D printer correctly. It contains the operating instructions, maintenance
information and application skills of the da Vinci 1.0 Professional 3D printer.
For the latest information about da Vinci 1.0 Professional 3D printer and XYZprinting
products, please contact your sales representative or visit XYZprinting website:
http://www.xyzprinting.com
Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.
Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm and /or injury.
Do not let children operate this device without adult supervision. Moving parts can cause serious injury.
Please use the grounded power cord supplied with the printer to prevent a possible electrical shock.
Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
Do not disassemble or replace the printer cover with none XYZprinting covers.
Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to printer damage or safety risks.
Do not use flammable chemicals or alcohol wipes to clean this device.
The process of heating the filament will produce a light non-toxic odor. Having a well ventilated area will ensure a more comfortable
environment.
Make sure to set the power switch to the off position and remove the power cord before transporting the device.
Do not touch the interior of the print while printing as it may be hot and include moving parts.
Some components of the printer are moving during operation. Do not attempt to touch or change anything inside before power off
the printer.
Do not attempt to service the printer beyond the instructions specified in this document. In the case of irrecoverable problem,
contact XYZprinting service center or your sales representative.
Product Safety
Safety and Compliance
Trademarks
Important Safety Information
Before you use, operate the product, change or remove any parts, components or materials of the product, or maintain the printer,
please ensure that you carefully read this User Manual and the safety instructions described below, and strictly follow the instructions
of such safety information.
The following warnings and attention notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so in
the case of performing maintenance procedures that are not described in this manual the burden of safety falls to the customer side.
All trademarks and registered trademarks are the property of their respective owners.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●

P 3
V.1.3
da Vinci 1.0 Pro
Product Overview
USB Port
Auto Feed System
Power Switch
Power Socket
Cartridge Slot
Function Key
Control Panel
Extruder Module
Print Bed
DA VINCI 1.0 Pro. 1
UTILITIES
SETTINGS
INFO
Levelness of the Print Bed may be susceptible to vibration during transportation, which may influence print quality.
Please adjust the bed with reference to「Print Bed Adjustment」 before printing.
Product Description
Accessory Checklist
． Cleaning wire x 5
Maintenance Tools
．Scraper
．Quick Guide,
Warranty Card
．Software CD ．Side Cover
Plate x2
．Filament
Cartridge ．Cartridge Locker ．USB Cable
．Power Cord
．Bed Tape X 3 pcs
（The bed tape is reusable and it
can be replaced when it’s worn.）
．Copper
Brush
．Cleaning
Brush ．Feeding Path
Cleaning Wire

P 4
V.1.3
da Vinci 1.0 Pro
8
Open the box and
remove the accessories
and the cushion
Use the grip to take
off the machine
Remove 2 foams at the front of the cardboard
Open the upper cover and remove
fixities listed above
Remove fixing
paperboard
Pay attention particularly to actual paperboard
removal of the fixities listed above
Be sure to remove the fixing foam from
the axis
Be sure to remove the
cable tie as illustrated
above
Do not cut this
white cable tie.
Remove the fixing
styrofoam beside the bed
Remove bottom screw and the
fixing screw on the bottom of
the bed
Insert the bundled
software CD into the
computer and install the
software according to
instruction
Use the USB cable to
connect the printer to PC.
Connect the power cord
to the printer then turn on
the power switch
Packing support x2
Tape x2
Cable tie x1
Cable tie x1
Tape x2
Packing support x2
9
5
12
11
6 7
2
4
Important Safety Notes
• Do not use the printer in dust rich, highly humid or outdoor environments.
• Do not use the printer on a soft or tilt table to prevent the machine from falling, which may result in damage or personal injury.
• Do not put your hand into the machine during operation to avoid collision risk due to movement of the machine or to avoid burn
due to high temperature.
Note: Please removal all fixed materials before turning on the printer to prevent the
machine from damage
Open the box
1
Product Description
Remove all fixing tapes and
the packing bag
3

P 5
V.1.3
da Vinci 1.0 Pro
Maintenance and Service
Keep original packaging material in the event of sending your unit back for repair during the
warranty period. If other packing materials are used instead, the print-er may be damaged during the
transportation process. In such situation, the XYZprinting the right to charge repair fee.
Notes and Description for Use of Maintenance Tools
• The following tools can be used only in an environment with guidance or monitoring by adult. Do not allow
children to obtain maintenance tools in unfamiliar situations in order to avoid danger.
• Please make sure to maintain the printer as the bed is cooled.
• After print is finished and the print bed is cooled to room temperature, the printing object may be taken off with Scraper.
• Filament residuals produced during print may also attach onto nozzle and gear of print module to influence print
quality, printer operation, as well as measurement result of bed. For such situation, please use cooper brush to
clean the print module.
●
Display and Control Panel
Direction Up / Decrease the value
Back to pervious menu /
Adjust the value /Move to
the preview item
Go to the next menu / Adjust
the value /Move to the next
item
Select / Confirm setting /
Confirm and exit
Direction Down / Increase
the value
Home menu
OK
Pro. 1
UTILITIES
SETTINGS
INFO
• In order to prevent print quality from impact due to residual and accumulated filament, which results in
poor discharge, after long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE"
(nozzle cleaning) function of the printer every 25 hours of print to clear residuals with nozzle cleaning
wire.or feeding path cleaning wire. (Filament should be unloaded from the extruder before cleaning
the feeding path.)

P 6
V.1.3
da Vinci 1.0 Pro
Printer screen menu,
functions and messages
UTILITIES
CHANGE CART
Installation and removal of filament, calibration of the printing bed and printing settings, including:
◆ CHANGE CART ◆ HOME AXES ◆ Z OFFSET ◆ JOG MODE
◆ CALIBRATE ◆ BUILD SAMPLE ◆ CLEAN NOZZLE
Load, unload filament and view the information about the filament. Using XYZprinting
filament to ensure smooth operation of the machine is recommended.
Refer to P.13 for Load filament
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
CHANGE CARTRIDGE
LOAD FILAMENT
UNLOAD FILAMENT
Pro. 1
UTILITIES
SETTINGS
INFO
HOME AXES
Use the function to move the extruder to upper right corner of printing space and the print bed to the top.
Extruder homing:
Select “YES” to return the extruder to the preset position.
HOME AXES
ARE YOU SURE?
NO
YES
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
Z OFFSET
Use the function to adjust the print bed upwards and downwards, and the printing distance
between the bed and printing module. The function will also record the setting value.
PREPARING
PLEASE WAIT
UTILITIES
HOME AXES
> Z OFFSET
JOG MODE
[ ^ ]
Z OFFSET 0.00 mm
[ v ]
[OK] TO RETURN
Wait for the extruder to heat up to operating temperature and unload the lament.
As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and
pull out the lament.
In unloading lament, activating the lament unloading function on the control panel of the printer.
UNLOAD FILAMENT
●

P 7
V.1.3
da Vinci 1.0 Pro
JOG MODE
Manually adjust the movement of X/Y/Z Axis for printer maintenance.
How to move the extruder:
Select “X-AXIS” to move extruder rightwards and leftwards
Select “Y-AXIS” to move extruder forwards and backwards
Select “Z-AXIS” to move the print bed
Use “UP” and “DOWN” buttons to select the moving distance. Then, select “-“ based on the desired distance
and press the “TO THE LEFT” button or select “+” and press the “TO THE RIGHT” button to adjust the moving
distance.
Press the “TO THE LEFT” button: The extruder will be adjusted rightwards/backwards or closer to the print bed.
Press the “TO THERIGHT” button: The extruder will be adjusted leftwards/forwards or away from the print bed.
Select a target to move:
●
●
●
●
●
●
Adjust the distance
JOG MODE
X-AXIS
Y-AXIS
Z-AXIS
UTILITIES
Z OFFSET
JOG MODE
CALIBRATE
X-AXIS [ OK ] >> EXIT
[ －]
▲
[ ■001mm ]
▲
[ ＋]
010mm
020mm
2
CALIBRATE
Use the function to adjust the print bed and make adjustment based on the reference value. The printing
quality will be affected by the levelness of the print bed. If you want to confirm the levelness of the print bed,
turn on the function to measure and check recommended adjustment.
UTILITIES
JOG MODE
CALIBRATE
BUILD SAMPLE
CALIBRATE
ARE YOU SURE?
NO
YES
Refer to P.15 for CALIBRATE
BUILD SAMPLE
3 built-in samples are stored in the printer. You can learn to use the printer through building samples.
Stick the bed tape onto the print bed before printing
UTILITIES
CALIBRATE
BUILD SAMPLE
CHANGE NOZZLE

P 8
V.1.3
da Vinci 1.0 Pro
CHANGE NOZZLE
Turn off the printer after the printing device and print bed automatically move to their positions and change
the printing module.
UTILTIES
BUILD SAMPLE
> CHANGE NOZZLE
CLEAN NOZZLE
CHANGE NOZZLE
ARE YOU SURE?
NO
YES
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
Levelness of the Print Bed may be susceptible to vibration during transportation, which may
influence print quality. Please adjust the bed with reference to「Print Bed Adjustment」 before
printing Insert Page information.(P.15)
Select "YES" and press "OK"
After completion of print, take off the print product.The print bed patch is reusable,replace the patch when it is worn out.
Stick the bed tape onto the print bed before printing or apply some glue stick on the bed tape for objects with
special structures to make the tape more adhesive and the object more difficult to come loose.
Note:
Select the built-in sample to be printed
KEY CHAIN
START BUILDING?
NO
YES
BUILD SAMPLE
DEMO
KEY CHAIN
HEART
2

P 9
V.1.3
da Vinci 1.0 Pro
● UTILITIES > CLEAN NOZZLE
Printer Maintenance
UTILITIES
BUILD SAMPLE
CHANGE NOZZLE
CLEAN NOZZLE
Regular cleaning of the print nozzle facilitates to not only extending service life of the printer, but also improves print
quality.
Enable "CLEAN NOZZLE" (nozzle cleaning) function. Clean the nozzle after the nozzle is heated up, the bed has
been lowered and the extruder has been moved to the front end, and "READY FOR CLEAN" is displayed on screen.
Clean the detecting pin with Copper Brush
Filament residues produced during printing may become
attached to the nozzle and gear of print module to
influence print quality, operation of the printer, and
measurement result of the bed. If such a situation is
encountered, please use a copper brush to clean the print
module by brushing off residue and dirt on the detecting
pin .
Clean Nozzle with Nozzle Cleaning Wire
With increased print frequency, the carbon accumulation
and dirt in the nozzle might affect print quality.
Thus, we recommend you to clean nozzle for every 25
hours of print. Please clamp the nozzle cleaning wire
with needle-nosed pliers to insert it into the opening of
the nozzle carefully for cleaning.
(Filament should be unloaded from the extruder before
cleaning the feeding path.)
Wipe Measurement Points
After the bed is lowered, please switch off power to
cool the bed, followed by wiping 4 measurement
points with damp cloth
1
2
3
Printer screen menu, functions and messages

P 10
V.1.3
da Vinci 1.0 Pro
SETTINGS
USER FILAMENT
BUZZER
AUTO HEAT
LANGUAGE
The basic settings of the machine, functions, selection and adjustment of printing values, including:
◆ USER FILAMENT ◆ BUZZER ◆ AUTO HEAT ◆ LANGUAGE ◆ ENERGY SAVE ◆ RESTORE DEFAULT
The user can customize the temperature of the extruder, print bed and unload filament based on the requirements of filament and
designing objects.
Refer to P.14 for Temperature Setting
When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or
issue is detected.
Pro. 1
UTILITIES
SETTINGS
INFO
BUZZER
OFF
ON
AUTO HEAT [OFF]
OFF
ON
LANGUAGE
ENGLISH
ニホンゴ
FRANCAIS
SETTINGS
USER FILAMENT
BUZZER ON
AUTO HEAT OFF
SETTINGS
BUZZER ON
AUTO HEAT OFF
LANGUAGE
SETTINGS
AUTO HEAT OFF
LANGUAGE EN
ENERGY SAVE 03M
USER FILAMENT
APPLY SETTING
------------------------
>NOZZLE: 210 ℃
USER FILAMENT
NOZZLE: 210 °C
> HEATBED: ON
BED: 040 °C ℃
USER FILAMENT
HEATBED ON
BED 040 °C
> UNLOAD 170 °C
NOZZLE Print Bed Filament Unloading
Buzzer is turned on by default, you can select “OFF” and press “OK” to change the setting.
We suggest setting the language shown on the printer screen before use. The user can switch among
English, Japanese, French, German, Italian and Spanish. English is the preset language.
For other languages: Use “UP” and “DOWN” buttons to select the desired language and press “OK”
to change setting.
●
“AUTO HEAT” is off by default. you can select ”ON” and “OK” to change the setting.
When “AUTO HEAT” is turned on, the printer heats up the extruder and the print bed after
powered on. This helps to shorten the idle time that is necessary to heat up the printer before
printing.
●
●